Development of hydrogen sensors based on fiber Bragg grating with a palladium foil for online dissolved gas analysis in transformers

Maximilian Fisser; Rodney A. Badcock; Paul D. Teal; Adam Swanson; Arvid Hunze

doi:10.1117/12.2267091

26 June 2017 Development of hydrogen sensors based on fiber Bragg grating with a palladium foil for online dissolved gas analysis in transformers

Maximilian Fisser, Rodney A. Badcock, Paul D. Teal, Adam Swanson, Arvid Hunze

Author Affiliations +

Proceedings Volume 10329, Optical Measurement Systems for Industrial Inspection X; 103292P (2017) https://doi.org/10.1117/12.2267091
Event: SPIE Optical Metrology, 2017, Munich, Germany

Abstract

Hydrogen evolution, identified by dissolved gas analysis (DGA), is commonly used for fault detection in oil immersed electrical power equipment. Palladium (Pd) is often used as a sensing material due to its high hydrogen absorption capacity and related change in physical properties. Hydrogen is absorbed by Pd causing an expansion of the lattice. The solubility, and therefore lattice expansion, increases with increasing partial pressure of hydrogen and decreasing temperature. As long as a phase change is avoided the expansion is reversible and can be utilized to transfer strain into a sensing element. Fiber Bragg gratings (FBG) are a well-established optical fiber sensor (OFS), mainly used for temperature and strain sensing. A safe, inexpensive, reliable and precise hydrogen sensor can be constructed using an FBG strain sensor to transduce the volumetric expansion of Pd due to hydrogen absorption. This paper reports on the development, and evaluation, of an FBG gas sensing OFS and long term measurements of dissolved hydrogen in transformer mineral oil. We investigate the effects of Pd foil cross-section and strain transfer between foil and fiber on the sensitivity of the OFS. Two types of Pd metal sensors were manufactured using modified Pd foil with 20 and 100 μm thickness. The sensors were tested in transformer oil at 90°C and a hydrogen concentration range from 20- 3200 ppm.

Citation Download Citation

Maximilian Fisser, Rodney A. Badcock, Paul D. Teal, Adam Swanson, and Arvid Hunze "Development of hydrogen sensors based on fiber Bragg grating with a palladium foil for online dissolved gas analysis in transformers", Proc. SPIE 10329, Optical Measurement Systems for Industrial Inspection X, 103292P (26 June 2017); https://doi.org/10.1117/12.2267091

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available