Paper
27 January 2023 Camera vibration correction of stereo-DIC systems for field measurements
Author Affiliations +
Proceedings Volume 12550, International Conference on Optical and Photonic Engineering (icOPEN 2022); 125500S (2023) https://doi.org/10.1117/12.2667531
Event: International Conference on Optical and Photonic Engineering (icOPEN 2022), 2022, ONLINE, China
Abstract
Camera vibration is one of the main factors affecting the measurement accuracy of stereo-DIC. It is difficult to keep fixed of the cameras in the field because of wind loads and ground vibrates. Currently, the research on camera vibration correction for Stereo-DIC in field measurements is fairly limited. This study proposes a camera vibration correction method based on fixed background points and motion model parameters. The background points are used to calculate the motion parameters of two cameras, and then the image coordinates of the interesting points that eliminate the global motion are estimated. The proposed method avoids repeated calibration of extrinsic parameters by correcting the motion of each camera separately. To verify the proposed method, an experiment in which the stereo cameras occurred relative movement was performed. Experiments shown that the proposed method has effectively corrected the effects of camera movements.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weiwu Feng and Shuiqiang Zhang "Camera vibration correction of stereo-DIC systems for field measurements", Proc. SPIE 12550, International Conference on Optical and Photonic Engineering (icOPEN 2022), 125500S (27 January 2023); https://doi.org/10.1117/12.2667531
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Vibration

Motion measurement

Imaging systems

Motion estimation

3D metrology

Motion models

RELATED CONTENT


Back to Top