Paper
23 July 1999 Active Fresnel Rhomb zig-zag slab amplifier: design and test
R. G. Bikmatov, V. M. Chernyak, John T. Hunt, L. P. Ignat'ev, V. G. Kuznetsov, Kenneth R. Manes, Michael I. Pergament, Ruslan V. Smirnov, Victor I. Sokolov
Author Affiliations +
Proceedings Volume 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion; (1999) https://doi.org/10.1117/12.354242
Event: Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, 1998, Monterey, CA, United States
Abstract
Zig-Zag-Slab-Amplifier had active element 4.5 X 40 X 43 cm3 in dimensions, six-bounce geometry of beam pass, pump cavity with transverse lamp orientation, and diffuse reflectors. Tests showed: the gain is equal to 8 per single pass at 77 kJ of pumping; its non-uniformity over about half of amplifier aperture is less than +/- 2.5 percent; the depolarization distortion over operating area is less than 0.5 percent.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. G. Bikmatov, V. M. Chernyak, John T. Hunt, L. P. Ignat'ev, V. G. Kuznetsov, Kenneth R. Manes, Michael I. Pergament, Ruslan V. Smirnov, and Victor I. Sokolov "Active Fresnel Rhomb zig-zag slab amplifier: design and test", Proc. SPIE 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, (23 July 1999); https://doi.org/10.1117/12.354242
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Optical amplifiers

Distortion

Glasses

Beam propagation method

Amplifiers

Optical components

Back to Top