Comparison of antireflective coated and uncoated surfaces figured by pitch-polishing and magnetorheological processes

Robert Chow; Michael D. Thomas; Robert C. Bickel; John R. Taylor

doi:10.1117/12.480213

30 May 2003 Comparison of antireflective coated and uncoated surfaces figured by pitch-polishing and magnetorheological processes

Robert Chow, Michael D. Thomas, Robert C. Bickel, John R. Taylor

Author Affiliations +

Proceedings Volume 4932, Laser-Induced Damage in Optical Materials: 2002 and 7th International Workshop on Laser Beam and Optics Characterization; (2003) https://doi.org/10.1117/12.480213
Event: XXXIV Annual Symposium on Optical Materials for High Power Lasers: Boulder Damage Symposium, 2002, Boulder, CO, United States

Abstract

When completed, the National Ignition Facility (NIF) will provide laser energies in the Mega-joule range. Successful pulse amplification to these extremely high levels requires that all small optics, found earlier in the beamline, have stringent surface and laser fluence requirements. In addition, they must operate reliably for 30 years constituting hundreds of thousands of shots. As part of the first four beamlines, spherical and aspherical lenses were required for the beam relaying telescopes. The magneto-rheological technique allows for faster and more accurate finishing of aspheres. The spherical and aspherical lenses were final figured using both coventional-pitch polishing processes for high quality laser optics and the magneto-rheological finishing process. The purpose of this paper is to compare the surface properties between these two finishing processes. Some lenses were set aside from production for evaluation. The surface roughness in the mid-frequency range was measured and the scatter was studied. Laser damage testing at 1064 nm (3-ns pulse width) was performed on surfaces in both the uncoated and coated condition.

Citation Download Citation

Robert Chow, Michael D. Thomas, Robert C. Bickel, and John R. Taylor "Comparison of antireflective coated and uncoated surfaces figured by pitch-polishing and magnetorheological processes", Proc. SPIE 4932, Laser-Induced Damage in Optical Materials: 2002 and 7th International Workshop on Laser Beam and Optics Characterization, (30 May 2003); https://doi.org/10.1117/12.480213

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available