Gradient of the residual stress distribution in the mechanical defect on the optical fiber surface

In Hee Shin; Tae-Jung Ahn; Dug Young Kim

doi:10.1117/12.645990

28 February 2006 Gradient of the residual stress distribution in the mechanical defect on the optical fiber surface

In Hee Shin, Tae-Jung Ahn, Dug Young Kim

Proceedings Volume 6116, Optical Components and Materials III; 61160V (2006) https://doi.org/10.1117/12.645990
Event: Integrated Optoelectronic Devices 2006, 2006, San Jose, California, United States

Abstract

Optical fibers are composed of the core and the cladding that are covered by the polymer coating to protect them from subsequent handling damage. Sometimes, this polymer coating, however, should be removed to fabricate optical devices involving the optical fiber such as Bragg gratings, optical couplers, optical sensors and optical connectors. In general, the mechanical stripper is used to remove this polymer coating. In this case, the mechanical stripper may cause mechanical defects on the surface of the optical fiber and also, mechanical defects make the optical fiber weak. We have researched relationship between these mechanical defects and the residual stress gradient in the optical fiber. We have made a mechanical defect on the surface of a single mode fiber with a mechanical blade and measured the residual stress distribution along the axial direction of the optical fiber. From this research, we have observed that at the position with the mechanical defect, the residual stress in the core was converted to the compressive residual stress (about 15MPa) and the residual stress in the cladding was converted to the tensile residual stress (about 7MPa). We have demonstrated that the mechanical defect on the fiber surface can cause the gradient of the residual stress distributions in the optical fiber and also, measurement of the residual stress distribution in the optical fiber can be used as a tool to find out the mechanical defects on the optical fiber.

Citation Download Citation

In Hee Shin, Tae-Jung Ahn, and Dug Young Kim "Gradient of the residual stress distribution in the mechanical defect on the optical fiber surface", Proc. SPIE 6116, Optical Components and Materials III, 61160V (28 February 2006); https://doi.org/10.1117/12.645990

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available