This PDF file contains the front matter associated with SPIE Proceedings Volume 9147, including the Title Page, Copyright information, Table of Contents, Invited Panel Discussion, and Conference Committee listing.

Gemini South's instrument suite has been completely transformed since our last biennial update. We commissioned the Gemini Multi-Conjugate Adaptive Optics System (GeMS) and its associated Gemini South Adaptive Optics Imager (GSAOI) as well as Flamingos-2, our long-slit and multi-object infrared imager and spectrograph, and the Gemini Planet Imager (GPI). We upgraded the CCDs in GMOS-S, our multi-object optical imager and spectrograph, with the GMOS-N CCD upgrade scheduled for 2015. Our next instrument, the Gemini High-resolution Optical SpecTrograph (GHOST) is in its preliminary design stage and we are making plans for the instrument to follow:Gen4#3.

The W. M. Keck Observatory continues to develop new capabilities in support of our science driven strategic plan which emphasizes leadership in key areas of observational astronomy. This leadership is a key component of the scientific productivity of our observing community and depends on our ability to develop new instrumentation, upgrades to existing instrumentation, and upgrades to supporting infrastructure at the observatory. In this paper we describe the as measured performance of projects completed in 2014 and the expected performance of projects currently in the development or construction phases. Projects reaching completion in 2014 include a near-IR tip/tilt sensor for the Keck I adaptive optics system, a new center launch system for the Keck II laser guide star facility, and NIRES, a near-IR Echelle spectrograph for the Keck II telescope. Projects in development include a new seeing limited integral field spectrograph for the visible wavelength range called the Keck Cosmic Web Imager, a deployable tertiary mirror for the Keck I telescope, upgrades to the spectrograph detector and the imager of the OSIRIS instrument, and an upgrade to the telescope control systems on both Keck telescopes.

The development plan for instrumentation at the Paranal Observatory was outlined at SPIE in 2012. Its overall goal is to keep Paranal at the forefront of ground-based astronomy. In addition to the completion of the current second generation instruments, the installation of the Adaptive Optics Facility and execution of the Very Large Telescope Interferometer mid-term implementation plan, it will allow one new instrument, or instrument upgrade, to be initiated per year. The plan is divided into two phases. Over 2013-2017, instruments are selected and developed with the criteria of filling the VLT capabilities and maintaining the balance between dedicated and general purpose facilities. Beyond 2018, the instruments will be deployed in the era of maturity of the European Extremely Large Telescope (E-ELT). The strategy for the second phase derives from analysis of VLT science in the E-ELT era, to be fully shaped in the coming five years. The Call for ideas for a new instrument for the New Technology Telescope at La Silla, fully funded by the community, has just been issued.

An overview of instrumentation for the Large Binocular Telescope (LBT) is presented. Optical instrumentation includes the Large Binocular Camera (LBC), a pair of wide-field (24′ × 24′) mosaic CCD imagers at the prime focus, and the Multi-Object Double Spectrograph (MODS), a pair of dual-beam blue-red optimized long-slit spectrographs mounted at the left and right direct F/15 Gregorian foci incorporating multiple slit masks for multi-object spectroscopy over a 6′ field and spectral resolutions of up to 2000. Infrared instrumentation includes the LBT Near-IR Spectrometer (LUCI), a modular near–infrared (0.9-2.5 μm) imager and spectrograph pair mounted at the left and right front–bent F/15 Gregorian foci and designed for seeing-limited (FOV: 4′ × 4′) imaging, long-slit spectroscopy, and multi-object spectroscopy utilizing cooled slit masks and diffraction limited (FOV: 0'.5 x 0'.5) imaging and long-slit spectroscopy. Strategic instruments under development that can utilize the full 23 m baseline of the LBT include an interferometric cryogenic beam combiner with near-infrared and thermal-infrared instruments for Fizeau imaging and nulling interferometry (LBTI) and an optical bench near- infrared beam combiner utilizing multi-conjugate adaptive optics for high angular resolution and sensitivity (LINC-NIRVANA). LBTI is currently undergoing commissioning and performing science observations on the LBT utilizing the installed adaptive secondary mirrors in both single–sided and two–sided beam combination modes. In addition, a fiber-fed bench spectrograph (PEPSI) capable of ultra high resolution spectroscopy and spectropolarimetry (R = 40,000-300,000) will be available as a principal investigator instrument. Installation and testing of the bench spectrograph will begin in July 2014. Over the past four years the LBC pair, LUCI1, and MODS1 have been commissioned and are now scheduled for routine partner science observations. Both LUCI2 and MODS2 passed their laboratory acceptance milestones in the summer of 2013 and have been installed on the LBT. LUCI2 is currently being commissioned and the data analysis is well underway. Diffraction–limited commissioning of its adaptive optics modes will begin in the 2014B semester. MODS2 commissioning began in May 2014 and will completed in the 2014B semester as well. Binocular testing and commissioning of both the LUCI and MODS pairs will begin in 2014B with the goal that this capability could be offered sometime in 2015. The availability of all these instruments mounted simultaneously on the LBT permits unique science, flexible scheduling, and improved operational support.

The Stratospheric Observatory for Infrared Astronomy (SOFIA) is the world’s largest airborne observatory, featuring a 2.5 meter effective aperture telescope housed in the aft section of a Boeing 747SP aircraft. SOFIA’s current instrument suite includes: FORCAST (Faint Object InfraRed CAmera for the SOFIA Telescope), a 5-40 μm dual band imager/grism spectrometer developed at Cornell University; HIPO (High-speed Imaging Photometer for Occultations), a 0.3-1.1μm imager built by Lowell Observatory; GREAT (German Receiver for Astronomy at Terahertz Frequencies), a multichannel heterodyne spectrometer from 60-240 μm, developed by a consortium led by the Max Planck Institute for Radio Astronomy; FLITECAM (First Light Infrared Test Experiment CAMera), a 1-5 μm wide-field imager/grism spectrometer developed at UCLA; FIFI-LS (Far-Infrared Field-Imaging Line Spectrometer), a 42-200 μm IFU grating spectrograph completed by University Stuttgart; and EXES (Echelon-Cross-Echelle Spectrograph), a 5-28 μm highresolution spectrometer designed at the University of Texas and being completed by UC Davis and NASA Ames Research Center. HAWC+ (High-resolution Airborne Wideband Camera) is a 50-240 μm imager that was originally developed at the University of Chicago as a first-generation instrument (HAWC), and is being upgraded at JPL to add polarimetry and new detectors developed at Goddard Space Flight Center (GSFC). SOFIA will continually update its instrument suite with new instrumentation, technology demonstration experiments and upgrades to the existing instrument suite. This paper details the current instrument capabilities and status, as well as the plans for future instrumentation.

The Daniel K. Inouye Solar Telescope is a 4-meter-class all-reflecting telescope under construction on Haleakalā mountain on the island of Maui, Hawai’i. When fully operational in 2019 it will be the world's largest solar telescope with wavelength coverage of 380 nm to 28 microns and advanced Adaptive Optics enabling the highest spatial resolution measurements of the solar atmosphere yet achieved. We review the first-generation DKIST instrument designs, select critical science program topics, and the operations and data handling and processing strategies to accomplish them.

CUBES is a high-efficiency, medium-resolution (R ≃ 20, 000) spectrograph dedicated to the “ground based UV” (approximately the wavelength range from 300 to 400nm) destined for the Cassegrain focus of one of ESO’s VLT unit telescopes in 2018/19. The CUBES project is a joint venture between ESO and Instituto de Astronomia, Geof´ısica e Ciˆencias Atmosf´ericas (IAG) at the Universidade de S˜ao Paulo and the Brazilian Laborat´orio Nacional de Astrofs´ıca (LNA). CUBES will provide access to a wealth of new and relevant information for stellar as well as extra-galactic sources. Principle science cases include the study of heavy elements in metal-poor stars, the direct determination of carbon, nitrogen and oxygen abundances by study of molecular bands in the UV range and the determination of the Beryllium abundance as well as the study of active galactic nuclei and the inter-galactic medium. With a streamlined modern instrument design, high efficiency dispersing elements and UV-sensitive detectors, it will enable a significant gain in sensitivity over existing ground based medium-high resolution spectrographs enabling vastly increased sample sizes accessible to the astronomical community. We present here a brief overview of the project, introducing the science cases that drive the design and discussing the design options and technological challenges.

The second generation Low Resolution Spectrograph (LRS2) is a new facility instrument for the Hobby-Eberly Telescope (HET). Based on the design of the Visible Integral-field Replicable Unit Spectrograph (VIRUS), which is the new flagship instrument for carrying out the HET Dark Energy Experiment (HETDEX), LRS2 provides integral field spectroscopy for a seeing-limited field of 12" x 6". For LRS2, the replicable design of VIRUS has been leveraged to gain broad wavelength coverage from 370 nm to 1.0 μm, spread between two fiber-fed dual- channel spectrographs, each of which can operate as an independent instrument. The blue spectrograph, LRS2-B, covers 370 λ (nm) ≤ 470 and 460 ≤ λ (nm) ≤ 700 at fixed resolving powers of R = λ/δλ ≈ 1900 and 1100, respectively, while the red spectrograph, LRS2-R, covers 650 ≤ λ (nm) ≤ 842 and 818 ≤ λ (nm) ≤ 1050 with both of its channels having R ≈ 1800. In this paper, we present a detailed description of the instrument’s design in which we focus on the departures from the basic VIRUS framework. The primary modifications include the fore-optics that are used to feed the fiber integral field units at unity fill-factor, the cameras’ correcting optics and detectors, and the volume phase holographic grisms. We also present a model of the instrument’s sensitivity and a description of specific science cases that have driven the design of LRS2, including systematically studying the spatially resolved properties of extended Lyα blobs at 2 < z < 3. LRS2 will provide a powerful spectroscopic follow-up platform for large surveys such as HETDEX.

The Robert Stobie Spectrograph Near Infrared Instrument (RSS-NIR), a prime focus facility instrument for the 11-meter Southern African Large Telescope (SALT), is well into its laboratory integration and testing phase. RSS-NIR will initially provide imaging and single or multi-object medium resolution spectroscopy in an 8 arcmin field of view at wavelengths of 0.9 - 1.7 μm. Future modes, including tunable Fabry-Perot spectral imaging and polarimetry, have been designed in and can be easily added later. RSS-NIR will mate to the existing visible wavelength RSS-VIS via a dichroic beamsplitter, allowing simultaneous operation of the two instruments in all modes. Multi-object spectroscopy covering a wavelength range of 0.32 - 1.7 μm on 10-meter class telescopes is a rare capability and once all the existing VIS modes are incorporated into the NIR, the combined RSS will provide observational modes that are completely unique. The VIS and NIR instruments share a common telescope focal plane, and slit mask for spectroscopic modes, and collimator optics that operate at ambient observatory temperature. Beyond the dichroic beamsplitter, RSS-NIR is enclosed in a pre-dewar box operating at -40 °C, and within that is a cryogenic dewar operating at 120 K housing the detector and final camera optics and filters. This semi-warm configuration with compartments at multiple operating temperatures poses a number of design and implementation challenges. In this paper we present overviews of the RSSNIR instrument design and solutions to design challenges, measured performance of optical components, detector system optimization results, and an update on the overall project status.

We present an overview of the VISIR upgrade project. VISIR is the mid-infrared imager and spectrograph at ESO’s VLT. The project team is comprised of ESO staff and members of the original VISIR consortium: CEA Saclay and ASTRON. The project plan is based on input from the ESO user community with the goal of enhancing the scientific performance and efficiency of VISIR by a combination of measures: installation of improved hardware, optimization of instrument operations and software support. The cornerstone of the upgrade is the 1k by 1k Si:As AQUARIUS detector array (Raytheon) which has been carefully characterized in ESO’s IR detector test facility (modified TIMMI 2 instrument). A prism spectroscopic mode will cover the N-band in a single observation. New scientific capabilities for high resolution and high-contrast imaging will be offered by sub-aperture mask (SAM) and phase-mask coronagraphic (4QPM/AGPM) modes. In order to make optimal use of favourable atmospheric conditions a water vapour monitor has been deployed on Paranal, allowing for real-time decisions and the introduction of a user-defined constraint on water vapour. During the commissioning in 2012 it was found that the on-sky sensitivity of the AQUARIUS detector was significantly below expectations and that VISIR was not ready to go back to science operations. Extensive testing of the detector arrays in the laboratory and on-sky enabled us to diagnose the cause for the shortcoming of the detector as excess low frequency noise (ELFN). It is inherent to the design chosen for this detector and can’t be remedied by changing the detector set-up. Since this is a form of correlated noise its impact can be limited by modulating the scene recorded by the detector. We have studied several mitigation options and found that faster chopping using the secondary mirror (M2) of the VLT offers the most promising way forward. Faster M2 chopping has been tested and is scheduled for implementation before the end of 2014 after which we plan to re-commission VISIR. In addition an upgrade of the IT infrastructure related to VISIR is planned in order to support burst-mode operations. The upgraded VISIR will be a powerful instrument providing close to background limited performance for diffraction-limited observations at an 8-m telescope. It will offer synergy with facilities such as ALMA, JWST, VLTI and SOFIA, while a wealth of targets is available from survey work (e.g. VISTA, WISE). In addition it will bring confirmation of the technical readiness and scientific value of several aspects of potential mid-IR instrumentation at Extremely Large Telescopes.

In the context of the Cherenkov Telescope Array observatory project, the ASTRI SST-2M end-to-end prototype telescope, entirely supported by the Italian National Institute of Astrophysics, is designed to detect cosmic primary gamma ray energies from few TeV up to hundreds of TeV. The ASTRI SST-2M prototype camera is part of the challenging synergy of novel optical design, camera sensors, front-end electronics and telescope structure design. The camera is devoted to imaging and recording the Cherenkov images of air showers induced by primary particles into the Earth’s atmosphere. In order to match the energy range mentioned above, the camera must be able to trigger events within a few tens of nanoseconds with high detection efficiency. This is obtained by combining silicon photo-multiplier sensors and suitable front-end electronics. Due to the characteristic imprint of the Cherenkov image that is a function of the shower core distance, the signal dynamic range of the pixels and consequently of the front-end electronics must span three orders of magnitude (1:1000 photo-electrons). These and many other features of the ASTRI SST-2M prototype camera will be reported in this contribution together with a complete overview of the mechanical and thermodynamic camera system.

The Visible Tunable Filter (VTF) is a narrowband tunable filter system for imaging spectropolarimetry. The instrument will be one of the first-light instruments of the Daniel K. Inouye Solar Telescope (DKIST) that is currently under construction on Maui (Hawaii). The DKIST has a clear aperture of 4 meters. The VTF is being developed by the Kiepenheuer Institut für Sonnenphysik in Freiburg, as a German contribution to the DKIST. The VTF is designed as a diffraction-limited narrowband tunable instrument for Stokes spectro-polarimetry in the wavelength range between 520 and 860 nm. The instrument uses large-format Fabry-Perot interferometers (Etalons) as tunable monochromators with clear apertures of about 240 mm. To minimize the influence of gravity on the interferometer plates, the Fabry-Perots are placed horizontally. This implies a complex optical design and a three-dimensional support structure instead of a horizontal optical bench. The VTF has a field of view of one arc minute squared. With 4096x4096 pixel detectors, one pixel corresponds to an angle of 0.014” on the sky (10 x 10 km on the Sun). The spectral resolution is 6 pm at a wavelength of 600 nm. One 2Dspectrum with a polarimetric sensitivity of 5E-3 will be recorded within 13 seconds. The wavelength range of the VTF includes a number of important spectral lines for the measurement flows and magnetic fields in the atmosphere of the Sun. The VTF uses three identical large-format detectors, two for the polarimetric measurements, and one for broadband filtergrams. The main scientific observables of the VTF are Stokes polarimetric images to retrieve the magnetic field configuration of the observed area, Doppler images to measure the line-of-sight flow in the solar photosphere, and monochromatic intensity filtergrams to study higher layers of the solar atmosphere.

The Daniel K. Inouye Solar Telescope (formerly Advanced Technology Solar Telescope) will be the world's largest solar telescope and polarimeter when completed in 2019. Efficient use of the telescope to address key science priorities calls for polarization measurements simultaneously over broad wavelength ranges and calibration of the telescope and polarimeters to high accuracy. Broadband polarization modulation and calibration optics utilizing crystal optics have been designed for this application. The performance of polarization modulators and calibration retarders is presented along with a discussion of the unique challenges of this application. Polarimeters operate over the ranges of 0.38-1.1 microns, 0.5-2.5 microns, and 1.0-5.0 microns. Efficient polarization modulation over these broad ranges led to modulators utilizing multiple wave plates and that are elliptical, rather than linear, retarders. Calibration retarders are linear retarders and are constructed from the same sub-component wave plate pairs as the polarization modulators. Polarization optics must address efficiency over broad wavelength ranges while meeting beam deflection, transmitted wave front error, and thermal constraints and doing so with designs that, though large in diameter, can be affordably manufactured.

We present a novel concept for a highly sensitive, medium spectral resolution optical through near-IR spectrograph. KIDSpec, the Kinetic Inductance Detector Spectrograph, uses the intrinsic energy resolving capability of an array of optical/IR-sensitive MKIDs to distinguish multiple orders from a low line-density (echelle) grating. MKID arrays have a wide bandpass (0.1-2.5um) and good quantum efficiency, making them strong candidates for replacing CCDs in many astronomical instruments. By acting as an ‘order resolver’, the MKID array replaces the cross-disperser in an echelle spectrograph. This greatly simplifies the optical layout of the spectrograph and enables longer slits than are possible with cross-dispersed instruments. KIDSpec would have similar capabilities to ESO’s X-shooter instrument. It would provide an R=4000-10,000 spectrum covering the entire optical and near-IR spectral range. In addition to a ‘long-slit’ mode, the IFU would provide a small (~50 spaxel) field-of-view for spatially resolved sources. In addition, the photon-counting operation of MKIDs and their photon-energy resolving ability enable a read-noise free spectrum with perfect cosmic ray removal. The spectral resolution would be sufficient to remove the bright night-sky lines without the additional pixel noise, making the instrument more sensitive than an equivalent semiconductor-based instrument. KIDSpec would enhance many existing high-profile science cases, including transient (GRB, SNe, etc.) follow-up, redshift determination of faint objects and transit spectroscopy of exoplanets. In addition it will enable unique science cases, such as dynamical mass estimates of the compact objects in ultra-compact binaries.

The High-speed Imaging Photometer for Occultations (HIPO) is a special purpose science instrument for SOFIA. HIPO can be co-mounted with FLITECAM in the so-called FLIPO configuration for stellar occultation or extrasolar planet transit observations. We gained some flight experience with HIPO and FLITECAM in 2011 as described in a previous publication (Dunham, et al., Proc SPIE, 8446-42, 2012). Since that time a number of improvements to HIPO have been made and a deeper understanding of the airborne environment's impact on photometric precision at optical wavelengths has been obtained. The improvements to HIPO include an improved beamsplitter for the FLIPO configuration, adding deep depletion CCDs as a detector option, expanding the filter set to include a Sloan Digital Sky Survey filter set as well as two custom filters for transit work, and an ability to guide the SOFIA telescope using HIPO data being acquired for science purposes. We now understand that variations in PSF size due to varying static air density has a noticeable impact on photometric stability while the related effect of Mach number is unimportant. The seriousness of ozone absorption in the Chappuis band is now understood and an approach to avoid this has been found. Finally we present demonstration transit data to illustrate our current transit photometry capability.

We are designing and constructing a new SETI (Search for Extraterrestrial Intelligence) instrument to search for direct evidence of interstellar communications via pulsed laser signals at near-infrared wavelengths. The new instrument design builds upon our past optical SETI experiences, and is the first step toward a new, more versatile and sophisticated generation of very fast optical and near-infrared pulse search devices. We present our instrumental design by giving an overview of the opto-mechanical design, detector selection and characterization, signal processing, and integration procedure. This project makes use of near-infrared (950 - 1650 nm) discrete amplification Avalanche Photodiodes (APD) that have > 1 GHz bandwidths with low noise characteristics and moderate gain (~104). We have investigated the use of single versus multiple detectors in our instrument (see Maire et al., this conference), and have optimized the system to have both high sensitivity and low false coincidence rates. Our design is optimized for use behind a 1m telescope and includes an optical camera for acquisition and guiding. A goal is to make our instrument relatively economical and easy to duplicate. We describe our observational setup and our initial search strategies for SETI targets, and for potential interesting compact astrophysical objects.

We present an overview of and status report on the WEAVE next-generation spectroscopy facility for the William Herschel Telescope (WHT). WEAVE principally targets optical ground-based follow up of upcoming ground-based (LOFAR) and space-based (Gaia) surveys. WEAVE is a multi-object and multi-IFU facility utilizing a new 2-degree prime focus field of view at the WHT, with a buffered pick-and-place positioner system hosting 1000 multi-object (MOS) fibres, 20 integral field units, or a single large IFU for each observation. The fibres are fed to a single spectrograph, with a pair of 8k(spectral) x 6k (spatial) pixel cameras, located within the WHT GHRIL enclosure on the telescope Nasmyth platform, supporting observations at R~5000 over the full 370-1000nm wavelength range in a single exposure, or a high resolution mode with limited coverage in each arm at R~20000. The project is now in the final design and early procurement phase, with commissioning at the telescope expected in 2017.

4MOST is a wide-field, high-multiplex spectroscopic survey facility under development for the VISTA telescope of the European Southern Observatory (ESO). Its main science drivers are in the fields of galactic archeology, high-energy physics, galaxy evolution and cosmology. 4MOST will in particular provide the spectroscopic complements to the large area surveys coming from space missions like Gaia, eROSITA, Euclid, and PLATO and from ground-based facilities like VISTA, VST, DES, LSST and SKA. The 4MOST baseline concept features a 2.5 degree diameter field-of-view with ~2400 fibres in the focal surface that are configured by a fibre positioner based on the tilting spine principle. The fibres feed two types of spectrographs; ~1600 fibres go to two spectrographs with resolution R<5000 (λ~390-930 nm) and ~800 fibres to a spectrograph with R>18,000 (λ~392-437 nm and 515-572 nm and 605-675 nm). Both types of spectrographs are fixed-configuration, three-channel spectrographs. 4MOST will have an unique operations concept in which 5 year public surveys from both the consortium and the ESO community will be combined and observed in parallel during each exposure, resulting in more than 25 million spectra of targets spread over a large fraction of the southern sky. The 4MOST Facility Simulator (4FS) was developed to demonstrate the feasibility of this observing concept. 4MOST has been accepted for implementation by ESO with operations expected to start by the end of 2020. This paper provides a top-level overview of the 4MOST facility, while other papers in these proceedings provide more detailed descriptions of the instrument concept[1], the instrument requirements development[2], the systems engineering implementation[3], the instrument model[4], the fibre positioner concepts[5], the fibre feed[6], and the spectrographs[7].

MOONS is a new Multi-Object Optical and Near-infrared Spectrograph selected by ESO as a third generation instrument for the Very Large Telescope (VLT). The grasp of the large collecting area offered by the VLT (8.2m diameter), combined with the large multiplex and wavelength coverage (optical to near-IR: 0.8μm - 1.8μm) of MOONS will provide the European astronomical community with a powerful, unique instrument able to pioneer a wide range of Galactic, Extragalactic and Cosmological studies and provide crucial follow-up for major facilities such as Gaia, VISTA, Euclid and LSST. MOONS has the observational power needed to unveil galaxy formation and evolution over the entire history of the Universe, from stars in our Milky Way, through the redshift desert, and up to the epoch of very first galaxies and re-ionization of the Universe at redshift z>8-9, just few million years after the Big Bang. On a timescale of 5 years of observations, MOONS will provide high quality spectra for >3M stars in our Galaxy and the local group, and for 1-2M galaxies at z>1 (SDSS-like survey), promising to revolutionise our understanding of the Universe. The baseline design consists of ~1000 fibers deployable over a field of view of ~500 square arcmin, the largest patrol field offered by the Nasmyth focus at the VLT. The total wavelength coverage is 0.8μm-1.8μm and two resolution modes: medium resolution and high resolution. In the medium resolution mode (R~4,000-6,000) the entire wavelength range 0.8μm-1.8μm is observed simultaneously, while the high resolution mode covers simultaneously three selected spectral regions: one around the CaII triplet (at R~8,000) to measure radial velocities, and two regions at R~20,000 one in the J-band and one in the H-band, for detailed measurements of chemical abundances.

MEGARA (Multi-Espectrógrafo en GTC de Alta Resolución para Astronomía) is an optical Integral-Field Unit (IFU) and Multi-Object Spectrograph (MOS) designed for the GTC 10.4m telescope in La Palma. MEGARA offers two IFU fiber bundles, one covering 12.5x11.3 arcsec² with a spaxel size of 0.62 arcsec (Large Compact Bundle; LCB) and another one covering 8.5x6.7 arcsec² with a spaxel size of 0.42 arcsec (Small Compact Bundle; SCB). The MEGARA MOS mode will allow observing up to 100 objects in a region of 3.5x3.5 arcmin² around the two IFU bundles. Both the LCB IFU and MOS capabilities of MEGARA will provide intermediate-to-high spectral resolutions (R_FWHM~6,000, 12,000 and 18,700, respectively for the low-, mid- and high-resolution Volume Phase Holographic gratings) in the range 3650-9700ÅÅ. These values become R_FWHM~7,000, 13,500, and 21,500 when the SCB is used. A mechanism placed at the pseudo-slit position allows exchanging the three observing modes and also acts as focusing mechanism. The spectrograph is a collimator-camera system that has a total of 11 VPHs simultaneously available (out of the 18 VPHs designed and being built) that are placed in the pupil by means of a wheel and an insertion mechanism. The custom-made cryostat hosts an E2V231-84 4kx4k CCD. The UCM (Spain) leads the MEGARA Consortium that also includes INAOE (Mexico), IAA-CSIC (Spain), and UPM (Spain). MEGARA is being developed under a contract between GRANTECAN and UCM. The detailed design, construction and AIV phases are now funded and the instrument should be delivered to GTC before the end of 2016.

The One Degree Imager (ODI) was deployed during the summer of 2012 at the WIYN 3.5m telescope, located on Kitt Peak near Tucson, AZ (USA). ODI is an optical imager designed to deliver atmosphere-limited image quality (≤ 0.4” FWHM) over a one degree field of view, and uses Orthogonal Transfer Array (OTA) detectors to also allow for on-chip tip/tilt image motion compensation. At this time, the focal plane is partially populated (”pODI”) with 13 out of 64 OTA detectors, providing a central scientifically usable field of view of about 24′ x 24′; four of the thirteen detectors are installed at outlying positions to probe image quality at all field angles. The image quality has been verified to be indeed better than 0.4′′ FWHM over the full field when atmospheric conditions allow. Based on over one year of operations, we summarize pODIs performance and lessons learned. As pODI has proven the viability of the ODI instrument, the WIYN consortium is engaging in an upgrade project to add 12 more detectors to the focal plane enlarging the scientifically usable field of view to about 40′ x 40′. A design change in the new detectors has successfully addressed a low light level charge transfer inefficiency.

The Visible Integral-field Replicable Unit Spectrograph (VIRUS) consists of a baseline build of 150 identical spectrographs (arrayed as 75 unit pairs) fed by 33,600 fibers, each 1.5 arcsec diameter, at the focus of the upgraded 10 m Hobby-Eberly Telescope (HET). VIRUS has a fixed bandpass of 350-550 nm and resolving power R~700. VIRUS is the first example of industrial-scale replication applied to optical astronomy and is capable of surveying large areas of sky, spectrally. The VIRUS concept offers significant savings of engineering effort, cost, and schedule when compared to traditional instruments. The main motivator for VIRUS is to map the evolution of dark energy for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX), using 0.8M Lyman-α emitting galaxies as tracers. The full VIRUS array is due to be deployed starting at the end of 2014 and will provide a powerful new facility instrument for the HET, well suited to the survey niche of the telescope, and will open up large area surveys of the emission line universe for the first time. VIRUS is in full production, and we are about half way through. We review the production design, lessons learned in reaching volume production, and preparation for deployment of this massive instrument. We also discuss the application of the replicated spectrograph concept to next generation instrumentation on ELTs.

VIRUS is the massively replicated fiber-fed spectrograph being built for the Hobby-Eberly Telescope to support HETDEX (the Hobby-Eberly Telescope Dark Energy Experiment). The instrument consists of 156 identical channels, fed by 34,944 fibers contained in 78 integral field units, deployed in the 22 arcminute field of the upgraded HET. VIRUS covers 350-550nm at R ≈ 700 and is built to target Lyman α emitters at 1.9 < z < 3.5 to measure the evolution of dark energy. Here we present the assembly line construction of the VIRUS spectrographs, including their alignment and plans for characterization. We briefly discuss plans for installation on the telescope. The spectrographs are being installed on the HET in several stages, and the instrument is due for completion by the end of 2014.

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar spectroscopic redshift survey. The DESI instrument consists of a new wide-field (3.2 deg. linear field of view) corrector plus a multi-object spectrometer with up to 5000 robotically positioned optical fibers and will be installed at prime focus on the Mayall 4m telescope at Kitt Peak, Arizona. The fibers feed 10 three-arm spectrographs producing spectra that cover a wavelength range from 360-980 nm and have resolution of 2000-5500 depending on the wavelength. The DESI instrument is designed for a 14,000 sq. deg. multi-year survey of targets that trace the evolution of dark energy out to redshift 3.5 using the redshifts of luminous red galaxies (LRGs), emission line galaxies (ELGs) and quasars. DESI is the successor to the successful Stage-III BOSS spectroscopic redshift survey and complements imaging surveys such as the Stage-III Dark Energy Survey (DES, currently operating) and the Stage-IV Large Synoptic Survey Telescope (LSST, planned start early in the next decade).

The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 μm to 1.26 μm, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 μm to 0.89 μm also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts (SuMIRe) project, while Hyper Suprime-Cam (HSC) works on the imaging part. HSC’s excellent image qualities have proven the high quality of the Wide Field Corrector (WFC), which PFS shares with HSC. The PFS collaboration has succeeded in the project Preliminary Design Review and is now in a phase of subsystem Critical Design Reviews and construction. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated microlens is glued to each fiber tip. The microlenses are molded glass, providing uniform lens dimensions and a variety of refractive-index selection. After successful production of mechanical and optical samples, mass production is now complete. Following careful investigations including Focal Ratio Degradation (FRD) measurements, a higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. After evaluating the statistics of positioning accuracies, collision avoidance software, and interferences (if any) within/between electronics boards, mass production will commence. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. All optical glass blanks are now being polished. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms. The active damping system against cooler vibration has been proven to work as predicted, and spectrographs have been designed to avoid small possible residual resonances.

EMIR is one of the first common user instruments for the GTC, the 10 meter telescope operating at the Roque de los Muchachos Observatory (La Palma, Canary Islands, Spain). EMIR is being built by a Consortium of Spanish and French institutes led by the Instituto de Astrofísica de Canarias (IAC). EMIR is primarily designed to be operated as a MOS in the K band, but offers a wide range of observing modes, including imaging and spectroscopy, both long slit and multiobject, in the wavelength range 0.9 to 2.5 μm. This contribution reports on the results achieved so far during the verification phase at the IAC prior to its shipment to the GTC for being commissioned, which is due by mid 2015. After a long period of design and fabrication, EMIR finally entered into its integration phase by mid 2013. Soon after this, the verification phase at the IAC was initiated aimed at configuring and tuning the EMIR functions, mostly the instrument control system, which includes a sophisticated on line data reduction pipeline, and demonstrating the fulfillment of the top level requirements. We have designed an ambitious verification plan structured along the three kind of detectors at hand: the MUX and the engineering and scientific grade arrays. The EMIR subsystems are being integrated as they are needed for the purposes of the verification plan. In the first stage, using the MUX, the full optical system, but with a single dispersive element out of the three which form the EMIR suite, the two large wheels mounting the filters and the pseudo-grisms, plus the detector translation unit holding the MUX, were mounted. This stage was mainly devoted to learn about the capabilities of the instrument, define different settings for its basic operation modes and test the accuracy, repeatability and reliability of the mechanisms. In the second stage, using the engineering Hawaii2 FPA, the full set of pseudo-grisms and band filters are mounted, which means that the instrument is fully assembled except for the cold slit unit, a robotic reconfigurable multislit mask system capable of forming multislit pattern of 55 different slitlets in the EMIR focal plane. This paper will briefly describe the principal units and features of the EMIR instrument as the main results of the verification performed so far are discussed. The development and fabrication of EMIR is funded by GRANTECAN and the Plan Nacional de Astronomía y Astrofísica (National Plan for Astronomy and Astrophysics, Spain).

Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital. It is mainly designed to study the physics and kinematics of the ionized gas, star formation and H II regions in the nearby galaxies. It is a novel instrument in terms of multi-IFU, built in deployment system, and high throughput. It consists of one magnifier, 16 integral field units (IFUs), and 8 spectrographs. Each IFU is comprised of a microlens array and optical fibers and has 7.4” x 8.7” field of view with 144 spaxel elements, each sampling 0.8” hexagonal aperture. The IFUs can be distributed on the telescope side port over an 8’ diameter focal plane by the deployment system. Optical fibers deliver light from the IFUs to the spectrographs. Eight identical, all refractive, dedicated spectrographs will produce 2,304 R~1800 spectra over 370-740nm wavelength range with a single exposure. Volume Phase Holographic gratings are chosen to make smaller optics and get high throughput. The total throughput of the instrument including the telescope is predicted as 27.5% on average. Observing techniques, data simulator and reduction software are also under development. Currently, conceptual and baseline design review has been done. Some of the components have already been procured. The instrument is expected to see its first light in 2016.

KMOS is a multi-object near-infrared integral field spectrograph built by a consortium of UK and German institutes for the ESO Paranal Observatory. We report on the on-sky performance verification of KMOS measured during three commissioning runs on the ESO VLT in 2012/13 and some of the early science results.

We describe the design, development, and laboratory test results of cryogenic probe arms feeding deployable integral field units (IFUs) for the Mid-resolution InfRAreD Astronomical Spectrograph (MIRADAS) - a near-infrared multi-object echelle spectrograph for the 10.4-meter Gran Telescopio Canarias. MIRADAS selects targets using 20 positionable pickoff mirror optics on cryogenic probe arms, each feeding a 3.7x1.2-arcsec field of view to the spectrograph integral field units, while maintaining excellent diffraction-limited image quality. The probe arms are based on a concept developed for the ACES instrument for Gemini and IRMOS for TMT. We report on the detailed design and opto-mechanical testing of MIRADAS prototype probe arms, including positioning accuracy, repeatability, and reliability under fully cryogenic operation, and their performance for MIRADAS. We also discuss potential applications of this technology to future instruments.

The High Efficiency and Resolution Multi Element Spectrograph, HERMES is an facility-class optical spectrograph for the AAT. It is designed primarily for Galactic Archeology [21], the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the of the Milky Way, through a detailed spatially tagged abundance study of one million stars. The spectrograph is based at the Anglo Australian Telescope (AAT) and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses VPH-gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 to 50,000 using a slit mask. The GALAH survey requires a SNR greater than 100 for a star brightness of V=14. The total spectral coverage of the four channels is about 100nm between 370 and 1000nm for up to 392 simultaneous targets within the 2 degree field of view. Hermes has been commissioned over 3 runs, during bright time in October, November and December 2013, in parallel with the beginning of the GALAH Pilot survey starting in November 2013. In this paper we present the first-light results from the commissioning run and the beginning of the GALAH Survey, including performance results such as throughput and resolution, as well as instrument reliability. We compare the abundance calculations from the pilot survey to those in the literature.

We describe the design, construction and measured performance of the Kitt Peak Ohio State Multi-Object Spectrograph (KOSMOS) for the 4-m Mayall telescope and the Cerro Tololo Ohio State Multi-Object Spectrograph (COSMOS) for the 4-m Blanco telescope. These nearly identical imaging spectrographs are modified versions of the OSMOS instrument; they provide a pair of new, high-efficiency instruments to the NOAO user community. KOSMOS and COSMOS may be used for imaging, long-slit, and multi-slit spectroscopy over a 100 square arcminute field of view with a pixel scale of 0.29 arcseconds. Each contains two VPH grisms that provide R~2500 with a one arcsecond slit and their wavelengths of peak diffraction efficiency are approximately 510nm and 750nm. Both may also be used with either a thin, blue-optimized CCD from e2v or a thick, fully depleted, red-optimized CCD from LBNL. These instruments were developed in response to the ReSTAR process. KOSMOS was commissioned in 2013B and COSMOS was commissioned in 2014A.

TAIPAN is a spectroscopic instrument designed for the UK Schmidt Telescope at the Australian Astronomical Observatory. In addition to undertaking the TAIPAN survey, it will serve as a prototype for the MANIFEST fibre positioner system for the future Giant Magellan Telescope. The design for TAIPAN incorporates up to 300 optical fibres situated within independently-controlled robotic positioners known as Starbugs, allowing precise parallel positioning of every fibre, thus significantly reducing instrument configuration time and increasing observing time. We describe the design of the TAIPAN instrument system, as well as the science that will be accomplished by the TAIPAN survey. We also highlight results from the on-sky tests performed in May 2014 with Starbugs on the UK Schmidt Telescope and briefly introduce the role that Starbugs will play in MANIFEST.

The Massively Multiplexed Spectrograph (mxSPEC) is a new instrument concept that takes advantage of modern high-speed large-format focal plane arrays (FPAs) and high efficiency bandpass isolation filters to multiplex spectra from many slices of the telescope field simultaneously onto the FPAs within a single grating spectrograph. This design greatly reduces the time required to scan a large telescope field, and with current technologies can achieve more than a factor of 50 or more improvement of the system efficiency over a conventional long-slit spectrograph. Furthermore, several spectral lines can be observed at the same time with proper selection of the diffraction grating, further improving the efficiency of this design to more than two orders of magnitude over conventional single-slit, single-wavelength instrument. This paper describes an experimental, proof-of-concept, 40-slit full-disk spectrograph that demonstrates the feasibility of this new instrument concept and its potential for solar physics research including helioseismology, dynamic solar events, and global scale magnetic field observation of the solar disk and the corona. We also present the preliminary design of a 4-line, 55-slit spectroheliograph that can serve as the template for the instruments of the next generation synoptic solar observatory.

Next-generation infrared astronomical instrumentation for ground-based and space telescopes could be based on MOEMS programmable slit masks for multi-object spectroscopy (MOS). This astronomical technique is used extensively to investigate the formation and evolution of galaxies. We are developing a 2048x1080 Digital-Micromirror-Device-based (DMD) MOS instrument to be mounted on the Galileo telescope and called BATMAN. A two-arm instrument has been designed for providing in parallel imaging and spectroscopic capabilities. The field of view (FOV) is 6.8 arcmin x 3.6 arcmin with a plate scale of 0.2 arcsec per micromirror. The wavelength range is in the visible and the spectral resolution is R=560 for 1 arcsec object (typical slit size). The two arms will have 2k x 4k CCD detectors. ROBIN, a BATMAN demonstrator, has been designed, realized and integrated. It permits to determine the instrument integration procedure, including optics and mechanics integration, alignment procedure and optical quality. First images and spectra have been obtained and measured: typical spot diameters are within 1.5 detector pixels, and spectra generated by one micro-mirror slits are displayed with this optical quality over the whole visible wavelength range. Observation strategies are studied and demonstrated for the scientific optimization strategy over the whole FOV. BATMAN on the sky is of prime importance for characterizing the actual performance of this new family of MOS instruments, as well as investigating the operational procedures on astronomical objects. This instrument will be placed on the Telescopio Nazionale Galileo mid-2015.

We report the current status of the Infrared Doppler (IRD) instrument for the Subaru telescope, which aims at detecting Earth-like planets around nearby M darwfs via the radial velocity (RV) measurements. IRD is a fiber-fed, near infrared spectrometer which enables us to obtain high-resolution spectrum (R~70000) from 0.97 to 1.75 μm. We have been developing new technologies to achieve 1m/s RV measurement precision, including an original laser frequency comb as an extremely stable wavelength standard in the near infrared. To achieve ultimate thermal stability, very low thermal expansion ceramic is used for most of the optical components including the optical bench.

SPIRou is a near-IR echelle spectropolarimeter and high-precision velocimeter under construction as a next- generation instrument for the Canada-France-Hawaii-Telescope. It is designed to cover a very wide simultaneous near-IR spectral range (0.98-2.35 μm) at a resolving power of 73.5K, providing unpolarized and polarized spectra of low-mass stars at a radial velocity (RV) precision of 1m/s. The main science goals of SPIRou are the detection of habitable super-Earths around low-mass stars and the study of stellar magnetism of star at the early stages of their formation. Following a successful final design review in Spring 2014, SPIRou is now under construction and is scheduled to see first light in late 2017. We present an overview of key aspects of SPIRou’s optical and mechanical design.

Las Cumbres Observatory Global Network (LCOGT) is building the Network of Robotic Echelle Spectrographs (NRES), which will consist of six identical, optical (390 - 860 nm) high-precision spectrographs, each fiber-fed simultaneously by two 1 meter telescopes and a thorium argon calibration source, one at each of our observatory sites in the Northern and Southern hemispheres. Thus, NRES will be a single, globally-distributed, autonomous observing facility using twelve 1-m telescopes. Simulations suggest we will achieve long-term precision of better than 3 m/s in less than an hour for stars brighter than V = 12. We have been fully funded with an NSF MRI grant, and expect our first spectrograph to be deployed in Spring of 2015, with the full network operation of all 6 units beginning in Spring of 2016. We discuss the NRES design, goals, and robotic operation, as well as the early results from our prototype spectrograph.

High resolution broad-band spectroscopy at near-infrared wavelengths has been performed using externally dis- persed interferometry (EDI) at the Hale telescope at Mt. Palomar. The EDI technique uses a field-widened Michelson interferometer in series with a dispersive spectrograph, and is able to recover a spectrum with a resolution 4 to 10 times higher than the existing grating spectrograph. This method increases the resolution well beyond the classical limits enforced by the slit width and the detector pixel Nyquist limit and, in principle, decreases the effect of pupil variation on the instrument line-shape function. The EDI technique permits arbi- trarily higher resolution measurements using the higher throughput, lower weight, size, and expense of a lower resolution spectrograph. Observations of many stars were performed with the TEDI interferometer mounted within the central hole of the 200 inch primary mirror. Light from the interferometer was then dispersed by the TripleSpec near-infrared echelle spectrograph. Continuous spectra between 950 and 2450 nm with a resolution as high as ~27,000 were recovered from data taken with TripleSpec at a native resolution of ∼2,700. Aspects of data analysis for interferometric spectral reconstruction are described. This technique has applications in im- proving measurements of high-resolution stellar template spectra, critical for precision Doppler velocimetry using conventional spectroscopic methods. A new interferometer to be applied for this purpose at visible wavelengths is under construction.

The use of spectrographs with telescopes having high order adaptive optics systems offers the possibility of achieving near diffraction-limited spectral resolving power. The adaptively corrected echelle spectrograph (ACES) couples the AO-corrected stellar image to the instrument with a near single mode fiber (SMF) for resolution of R~190,000. The First Light Adaptive Optics system (FLAO) at the Large Binocular Telescope (LBT) achieves Strehl of >80% in H band, and also delivers useful Strehls in V and R bands. In this paper we explore the possibility of using ACES with the LBT for simultaneous high resolution, high throughput, and broad wavelength coverage.

High-resolution infrared spectroscopy plays an important role in astrophysics from the search for exoplanets to cosmology. Yet, many existing infrared spectrographs are limited by a rather small simultaneous wavelength coverage. The AO assisted CRIRES instrument, installed at the ESO VLT on Paranal, is one of the few IR (0.92-5.2 μm) highresolution spectrographs in operation since 2006. However it has a limitation that hampers its efficient use: the wavelength range covered in a single exposure is limited to ~15 nanometers. The CRIRES Upgrade project (CRIRES+) will transform CRIRES into a cross-dispersed spectrograph and will also add new capabilities. By introducing crossdispersion elements the simultaneously covered wavelength range will be increased by at least a factor of 10 with respect to the present configuration, while the operational wavelength range will be preserved. For advanced wavelength calibration, new custom made absorption gas cells and etalons will be added. A spectro-polarimetric unit will allow one for the first time to record circularly polarized spectra at the highest spectral resolution. This will be all supported by a new data reduction software which will allow the community to take full advantage of the new capabilities of CRIRES+.

High resolution infrared spectroscopy has been a major challenging task to accomplish in astronomy due to the enormous size and cost of IR spectrographs built with traditional gratings. A silicon immersion grating, due to its over three times high dispersion over a traditional reflective grating, offers a compact and low cost design of new generation IR high resolution spectrographs. Here we report the on-sky performance of the first silicon immersion grating spectrometer, called Florida IR Silicon immersion grating spectromeTer (FIRST), commissioned at the 2-meter Automatic Spectroscopic Telescope (AST) of Fairborn Observatory in Arizona in October 2013. The measured spectral resolution is R=50,000 with a 50 mm diameter spectrograph pupil and a blaze angle of 54.7 degree. The 1.4-1.8 m wavelength region (the Red channel) is completely covered in a single exposure with a 2kx2k H2RG IR array while the 0.8-1.35 μm region is nearly completely covered by the cross-dispersed echelle mode (the Blue channel) at R=50,000 in a single exposure. The instrument is operated in a high vacuum (about 1 micro torr) and cryogenic temperatures (the bench at 189K and the detector at 87K) and with a precise temperature control. It is primarily used for high precision Doppler measurements (~3 m/s) of low mass M dwarf stars for the identification and characterization of extrasolar planets. A plan for a high cadence and high precision survey of habitable super-Earths around ~150 nearby M dwarfs and a major upgrade with integral field unit low resolution spectroscopy are also introduced.

We present a re-engineered version of the laser frequency comb that has proven a few-cm/s calibration repeatability on the HARPS spectrograph during past campaigns. The new design features even better performance characteristics. The newly arranged oscillator, filter cavities and fiber injection for spectral broadening allow robust long term operation, controlled from a remote site. Its automation features enable easy operation for non-experts. The system is being prepared for installation on the HARPS spectrograph in fall of 2014, and will subsequently become available to the astronomical community.

The Immersion Grating Infrared Spectrometer (IGRINS) is a compact high-resolution near-infrared cross-dispersed spectrograph whose primary disperser is a silicon immersion grating. IGRINS covers the entire portion of the wavelength range between 1.45 and 2.45μm that is accessible from the ground and does so in a single exposure with a resolving power of 40,000. Individual volume phase holographic (VPH) gratings serve as cross-dispersing elements for separate spectrograph arms covering the H and K bands. On the 2.7m Harlan J. Smith telescope at the McDonald Observatory, the slit size is 1ʺ x 15ʺ and the plate scale is 0.27ʺ pixel. The spectrograph employs two 2048 x 2048 pixel Teledyne Scientific and Imaging HAWAII-2RG detectors with SIDECAR ASIC cryogenic controllers. The instrument includes four subsystems; a calibration unit, an input relay optics module, a slit-viewing camera, and nearly identical H and K spectrograph modules. The use of a silicon immersion grating and a compact white pupil design allows the spectrograph collimated beam size to be only 25mm, which permits a moderately sized (0.96m x 0.6m x 0.38m) rectangular cryostat to contain the entire spectrograph. The fabrication and assembly of the optical and mechanical components were completed in 2013. We describe the major design characteristics of the instrument including the system requirements and the technical strategy to meet them. We also present early performance test results obtained from the commissioning runs at the McDonald Observatory.

GIANO is the high resolution near IR spectrograph recently commissioned at the 3.58m Telescopio Nazionale Galileo in La Palma (Spain). GIANO is the first worldwide instrument providing cross-dispersed echelle spectroscopy at a resolution of 50,000 over the 0.95 – 2.45 micron spectral range in a single exposure. There are outstanding science cases in the research fields of exo-planets, Galactic stars and stellar populations that could strongly benefit from GIANO observations down to a magnitude limit comparable to that of 2MASS. The instrument includes a fully cryogenic spectrograph and an innovative fiber system transmitting out to the K band. It also represents a formidable laboratory to test performances and prototype solutions for the next generation of high resolution near IR spectrographs at the ELTs. First results from sky tests at the telescope and science verification occurred between July 2012 and October 2013 will be presented.

This paper gives an overview of the CARMENES instrument and of the survey that will be carried out with it during the first years of operation. CARMENES (Calar Alto high-Resolution search for M dwarfs with Exoearths with Near-infrared and optical Echelle Spectrographs) is a next-generation radial-velocity instrument under construction for the 3.5m telescope at the Calar Alto Observatory by a consortium of eleven Spanish and German institutions. The scientific goal of the project is conducting a 600-night exoplanet survey targeting ~ 300 M dwarfs with the completed instrument. The CARMENES instrument consists of two separate echelle spectrographs covering the wavelength range from 0.55 to 1.7 μm at a spectral resolution of R = 82,000, fed by fibers from the Cassegrain focus of the telescope. The spectrographs are housed in vacuum tanks providing the temperature-stabilized environments necessary to enable a 1 m/s radial velocity precision employing a simultaneous calibration with an emission-line lamp or with a Fabry-Perot etalon. For mid-M to late-M spectral types, the wavelength range around 1.0 μm (Y band) is the most important wavelength region for radial velocity work. Therefore, the efficiency of CARMENES has been optimized in this range. The CARMENES instrument consists of two spectrographs, one equipped with a 4k x 4k pixel CCD for the range 0.55 - 1.05 μm, and one with two 2k x 2k pixel HgCdTe detectors for the range from 0.95 - 1.7μm. Each spectrograph will be coupled to the 3.5m telescope with two optical fibers, one for the target, and one for calibration light. The front end contains a dichroic beam splitter and an atmospheric dispersion corrector, to feed the light into the fibers leading to the spectrographs. Guiding is performed with a separate camera; on-axis as well as off-axis guiding modes are implemented. Fibers with octagonal cross-section are employed to ensure good stability of the output in the presence of residual guiding errors. The fibers are continually actuated to reduce modal noise. The spectrographs are mounted on benches inside vacuum tanks located in the coud´e laboratory of the 3.5m dome. Each vacuum tank is equipped with a temperature stabilization system capable of keeping the temperature constant to within ±0.01°C over 24 hours. The visible-light spectrograph will be operated near room temperature, while the near-IR spectrograph will be cooled to ~ 140 K. The CARMENES instrument passed its final design review in February 2013. The MAIV phase is currently ongoing. First tests at the telescope are scheduled for early 2015. Completion of the full instrument is planned for the fall of 2015. At least 600 useable nights have been allocated at the Calar Alto 3.5m Telescope for the CARMENES survey in the time frame until 2018. A data base of M stars (dubbed CARMENCITA) has been compiled from which the CARMENES sample can be selected. CARMENCITA contains information on all relevant properties of the potential targets. Dedicated imaging, photometric, and spectroscopic observations are underway to provide crucial data on these stars that are not available in the literature.

The Habitable-Zone Planet Finder is a stabilized, fiber-fed, NIR spectrograph being built for the 10m Hobby- Eberly telescope (HET) that will be capable of discovering low mass planets around M dwarfs. The optical design of the HPF is a white pupil spectrograph layout in a vacuum cryostat cooled to 180 K. The spectrograph uses gold-coated mirrors, a mosaic echelle grating, and a single Teledyne Hawaii-2RG (H2RG) NIR detector with a 1.7-micron cutoff covering parts of the information rich z, Y and J NIR bands at a spectral resolution of R∼50,000. The unique design of the HET requires attention to both near and far-field fiber scrambling, which we accomplish with double scramblers and octagonal fibers. In this paper we discuss and summarize the main requirements and challenges of precision RV measurements in the NIR with HPF and how we are overcoming these issues with technology, hardware and algorithm developments to achieve high RV precision and address stellar activity.

ESPRESSO is the next generation ground based European exoplanets hunter. It will combine the efficiency of modern echelle spectrograph with extreme radial-velocity and spectroscopic precision. It will be installed at Paranal's VLT in order to achieve two magnitudes gain with respect to its predecessor HARPS, and the instrumental radial-velocity precision will be improved to reach 10 cm/s level. We have constituted a Consortium of astronomical research institutes to fund, design and build ESPRESSO on behalf of and in collaboration with ESO, the European Southern Observatory. The spectrograph will be installed at the Combined Coudé Laboratory (CCL) of the VLT, it will be linked to the four 8.2 meters Unit Telescopes through four optical "Coudé trains" and will be operated either with a single telescope or with up to four UTs, enabling an additional 1.5 magnitude gain. Thanks to its characteristics and ability of combining incoherently the light of 4 large telescopes, ESPRESSO will offer new possibilities in many fields of astronomy. Our main scientific objectives are, however, the search and characterization of rocky exoplanets in the habitable zone of quiet, near-by G to M-dwarfs, and the analysis of the variability of fundamental physical constants. The project is, for most of its workpackages, in the procurement or development phases, and the CCL infrastructure is presently under adaptation work. In this paper, we present the scientific objectives, the capabilities of ESPRESSO, the technical solutions for the system and its subsystems. The project aspects of this facility are also described, from the consortium and partnership structure to the planning phases and milestones.

PIMMS échelle is an extension of previous PIMMS (photonic integrated multimode spectrograph) designs, enhanced by using an échelle diffraction grating as the primary dispersing element for increased spectral band- width. The spectrograph operates at visible wavelengths (550 to 780nm), and is capable of capturing ~100 nm of R > 60, 000 (λ/(triangle)λ) spectra in a single exposure. PIMMS échelle uses a photonic lantern to convert an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs (i.e. N single-mode fibres). This allows a truly diffraction limited spectral resolution, while also decoupling the spectrograph design from the input source. Here both the photonic lantern and the spectrograph slit are formed using a single length of multi-core fibre. A 1x19 (1 multi-mode fiber to 19 single-mode fibres) photonic lantern is formed by tapering one end of the multi-core fibre, while the other end is used to form a TIGER mode slit (i.e. for a hexagonal grid with sufficient spacing and the correct orientations, the cores of the multi-core fibre can be dispersed such that they do not overlap without additional reformatting). The result is an exceptionally compact, shoebox sized, spectrograph that is constructed primarily from commercial off the shelf components. Here we present a brief overview of the échelle spectrograph design, followed by results from on-sky testing of the breadboard mounted version of the spectrograph at the ‘UK Schmidt Telescope’.

The Gemini High-Resolution Optical SpecTrograph (GHOST) is the newest instrument being developed for the Gemini telescopes, in a collaboration between the Australian Astronomical Observatory (AAO), the NRC - Herzberg in Canada and the Australian National University (ANU). We describe the process of design optimisation that utilizes the unique strengths of the new partner, NRC - Herzberg, the design and need for the slit viewing camera system, and we describe a simplification for the lenslet-based slit reformatting. Finally, we out- line the updated project plan, and describe the unique scientific role this instrument will have in an international context, from exoplanets through to the distant Universe.

The Gemini Planet Imager (GPI) is a complex optical system designed to directly detect the self-emission of young planets within two arcseconds of their host stars. After suppressing the starlight with an advanced AO system and apodized coronagraph, the dominant residual contamination in the focal plane are speckles from the atmosphere and optical surfaces. Since speckles are diffractive in nature their positions in the field are strongly wavelength dependent, while an actual companion planet will remain at fixed separation. By comparing multiple images at different wavelengths taken simultaneously, we can freeze the speckle pattern and extract the planet light adding an order of magnitude of contrast. To achieve a bandpass of 20%, sufficient to perform speckle suppression, and to observe the entire two arcsecond field of view at diffraction limited sampling, we designed and built an integral field spectrograph with extremely low wavefront error and almost no chromatic aberration. The spectrograph is fully cryogenic and operates in the wavelength range 1 to 2.4 microns with five selectable filters. A prism is used to produce a spectral resolution of 45 in the primary detection band and maintain high throughput. Based on the OSIRIS spectrograph at Keck, we selected to use a lenslet-based spectrograph to achieve an rms wavefront error of approximately 25 nm. Over 36,000 spectra are taken simultaneously and reassembled into image cubes that have roughly 192x192 spatial elements and contain between 11 and 20 spectral channels. The primary dispersion prism can be replaced with a Wollaston prism for dual polarization measurements. The spectrograph also has a pupil-viewing mode for alignment and calibration.

SPHERE is an extrasolar planet imager whose goal is to detect giant extrasolar planets in the vicinity of bright stars and to characterize them through spectroscopic and polarimetric observations. It is a complete system with a core made of an extreme-Adaptive Optics (AO) turbulence correction, a pupil tracker and NIR and Visible coronagraph devices. At its back end, a differential dual imaging camera and an integral field spectrograph (IFS) work in the Near Infrared (NIR) (0.95 ≤λ≤2.32 μm) and a high resolution polarization camera covers the visible (0.6 ≤λ≤0.9 μm). The IFS is a low resolution spectrograph (R~50) operates in the near IR (0.95≤λ≤1.6 μm), an ideal wavelength range for the detection of planetary features, over a field of view of about 1.7 x 1.7 square arcsecs. Form spectra it is possible to reconstruct monochromatic images with high contrast (10^-7) and high spatial resolution, well inside the star PSF. In this paper we describe the IFS, its calibration and the results of several performance which IFS underwent. Furthermore, using the IFS characteristics we give a forecast on the planetary detection rate.

We present an update on LINC-NIRVANA (LN), an innovative, high-resolution infrared imager for the Large Binocular Telescope (LBT). LN uses Multi-Conjugate Adaptive Optics (MCAO) for high-sky-coverage diffraction-limited imagery and interferometric beam combination. The last two years have seen both successes and challenges. On the one hand, final integration is proceeding well in the lab. We also achieved First Light at the LBT with the Pathfinder experiment. On the other hand, funding constraints have forced a significant re-planning of the overall instrument implementation. This paper presents our progress and plans for bringing the instrument online at the telescope.

The mid-infrared (8-13 μm) camera, NOMIC, is a critical component of the Large Binocular Telescope Interferometer search for exozodiacal light around near-by stars. It is optimized for nulling interferometry but has general capability for direct imaging, low resolution spectrometry, and Fizeau interferometry. The camera uses a Raytheon 1024x1024 Si:As IBC Aquarius array with a 30 μm pitch which yields 0.018 arc-second pixels on the sky. This provides spatial resolution (λ/D) at a 10 μm wavelength of 0.27 arc-seconds for a single 8.4 meter LBT aperture and of 0.10 arcseconds for Fizeau interferometry with the dual apertures. The array is operated with a differential preamplifier and a version of the 16 channel array controller developed at Cornell University for the FORCAST instrument on the Sofia Observatory. With a 2.4 MHz pixel rate the camera can achieve integration times as short as 27 milliseconds full array and 3 milliseconds partial array. The large range of integration times and two array integration well sizes allow for a wide range of background flux on the array. We describe the design and operation of the camera and present the performance of this system in terms of linearity, noise, quantum efficiency, image quality, and photometric sensitivity.

FRIDA is a diffraction limited imager and integral field spectrometer that is being built for the Gran Telescopio Canarias. FRIDA has been designed and is being built as a collaborative project between institutions from México, Spain and the USA. In imaging mode FRIDA will provide scales of 0.010, 0.020 and 0.040 arcsec/pixel and in IFS mode spectral resolutions R ~ 1000, 4,500 and 30,000. FRIDA is starting systems integration and is scheduled to complete fully integrated system tests at the laboratory by the end of 2015 and be delivered to GTC shortly after. In this contribution we present a summary of its design, fabrication, current status and potential scientific applications.

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is one of a handful of extreme adaptive optics systems set to come online in 2014. The extreme adaptive optics correction is realized by a combination of precise wavefront sensing via a non-modulated pyramid wavefront sensor and a 2000 element deformable mirror. This system has recently begun on-sky commissioning and was operated in closed loop for several minutes at a time with a loop speed of 800 Hz, on ~150 modes. Further suppression of quasi-static speckles is possible via a process called "speckle nulling" which can create a dark hole in a portion of the frame allowing for an enhancement in contrast, and has been successfully tested on-sky. In addition to the wavefront correction there are a suite of coronagraphs on board to null out the host star which include the phase induced amplitude apodization (PIAA), the vector vortex, 8 octant phase mask, 4 quadrant phase mask and shaped pupil versions which operate in the NIR (y-K bands). The PIAA and vector vortex will allow for high contrast imaging down to an angular separation of 1 λ/D to be reached; a factor of 3 closer in than other extreme AO systems. Making use of the left over visible light not used by the wavefront sensor is VAMPIRES and FIRST. These modules are based on aperture masking interferometry and allow for sub-diffraction limited imaging with moderate contrasts of ~100-1000:1. Both modules have undergone initial testing on-sky and are set to be fully commissioned by the end of 2014.

The instrument SPHERE (Spectro-Polarimetric High-contrast Exoplanet REsearch), recently installed on the VLT-UT3, aims to detected and characterize giant extra-solar planets and the circumstellar environments in the very close vicinity of bright stars. The extreme brightness contrast and small angular separation between the planets or disks and their parent stars have so far proven very challenging. SPHERE will meet this challenge by using an extreme AO, stellar coronagraphs, an infrared dual band and polarimetric imager called IRDIS, an integral field spectrograph, and a visible polarimetric differential imager called ZIMPOL. Polarimetry allows a separation of the light coming from an unpolarized source such as a star and the polarized source such as a planet or protoplanetary disks. In this paper we present the performance of the infrared polarimetric imager based on experimental validations performed within SPHERE before the preliminary acceptance in Europe. We report on the level of instrumental polarization in the infrared and its calibration limit. Using differential polarimetry technique, we quantify the level of speckle suppression, and hence improved sensitivity in the context of imaging extended stellar environments.

A new polarimeter has been built for the “Observatoire du Mont-Mégantic” (POMM) and is now in commissioning phase. It will allow polarization measurements with a precision of 10-6, an improvement by a factor of 100 over the previous observatory polarimeter. The characteristics of the instrument that allow this goal are briefly discussed and the planned science observations are presented. They include exoplanets near their host star (hot Jupiters), transiting exoplanets, stars with debris disks, young stars with proto-planetary disks, brown dwarfs, massive Wolf-Rayet stars and comets. The details of the optical and mechanical designs are presented in two other papers.

Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on the WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow virtually full sky coverage with faint natural guide stars. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

The Enhanced Resolution Imager and Spectrograph (ERIS) is the next-generation adaptive optics near-IR imager and spectrograph for the Cassegrain focus of the Very Large Telescope (VLT) Unit Telescope 4, which will soon make full use of the Adaptive Optics Facility (AOF). It is a high-Strehl AO-assisted instrument that will use the Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). The project has been approved for construction and has entered its preliminary design phase. ERIS will be constructed in a collaboration including the Max- Planck Institut für Extraterrestrische Physik, the Eidgenössische Technische Hochschule Zürich and the Osservatorio Astrofisico di Arcetri and will offer 1 - 5 μm imaging and 1 - 2.5 μm integral field spectroscopic capabilities with a high Strehl performance. Wavefront sensing can be carried out with an optical high-order NGS Pyramid wavefront sensor, or with a single laser in either an optical low-order NGS mode, or with a near-IR low-order mode sensor. Due to its highly sensitive visible wavefront sensor, and separate near-IR low-order mode, ERIS provides a large sky coverage with its 1’ patrol field radius that can even include AO stars embedded in dust-enshrouded environments. As such it will replace, with a much improved single conjugated AO correction, the most scientifically important imaging modes offered by NACO (diffraction limited imaging in the J to M bands, Sparse Aperture Masking and Apodizing Phase Plate (APP) coronagraphy) and the integral field spectroscopy modes of SINFONI, whose instrumental module, SPIFFI, will be upgraded and re-used in ERIS. As part of the SPIFFI upgrade a new higher resolution grating and a science detector replacement are envisaged, as well as PLC driven motors. To accommodate ERIS at the Cassegrain focus, an extension of the telescope back focal length is required, with modifications of the guider arm assembly. In this paper we report on the status of the baseline design. We will also report on the main science goals of the instrument, ranging from exoplanet detection and characterization to high redshift galaxy observations. We will also briefly describe the SINFONI-SPIFFI upgrade strategy, which is part of the ERIS development plan and the overall project timeline.

We propose a new high contrast imager for Kyoto 4m segmented telescope called SEICA (Second-generation Exoplanet Imager with Coronagraphic Adaptive optics), aiming at detection and characterization of selfluminous gas giants within 10AU around nearby stars. SEICA is aggressively optimized for high performance at very small inner working angle, 10^-6 detection contrast at 0".1 in 1-hour integration. We start the on-sky commissioning test in 2016 and the science observations in 2017. Since it is the first time to realize the highcontrast imaging on the segmented telescope, SEICA is an important step toward future high contrast sciences on Extremely Large Telescopes (ELTs). This paper presents an overall of the SEICA program and the conceptual design for ultimate performance under given atmospheric conditions.

Princeton University is building the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS), an integral field spectrograph (IFS) for the Subaru telescope. CHARIS is funded by the National Astronomical Observatory of Japan and is designed to take high contrast spectra of brown dwarfs and hot Jovian planets in the coronagraphic image provided by the Coronagraphic Extreme Adaptive Optics (SCExAO) and the AO188 adaptive optics systems. The project is now in the build and test phase at Princeton University. Once laboratory testing has been completed CHARIS will be integrated with SCExAO and AO188 in the winter of 2016. CHARIS has a high-resolution characterization mode in J, H, and K bands. The average spectral resolution in J, H, and K bands are R82, R68, and R82 respectively, the uniformity of which is a direct result of a new high index material, L-BBH2. CHARIS also has a second low-resolution imaging mode that spans J,H, and K bands with an average spectral resolution of R19, a feature unique to this instrument. The field of view in both imaging modes is 2.07x2.07 arcseconds. SCExAO+CHARIS will detect objects five orders of magnitude dimmer than their parent star down to an 80 milliarcsecond inner working angle. The primary challenge with exoplanet imaging is the presence of quasi-static speckles in the coronagraphic image. SCExAO has a wavefront control system to suppress these speckles and CHARIS will address their impact on spectral crosstalk through hardware design, which drives its optical and mechanical design. CHARIS constrains crosstalk to be below 1% for an adjacent source that is a full order of magnitude brighter than the neighboring spectra. Since CHARIS is on the Nasmyth platform, the optical alignment between the lenslet array and prism is highly stable. This improves the stability of the spectra and their orientation on the detector and results in greater stability in the wavelength solution for the data pipeline. This means less uncertainty in the post-processing and less overhead for on-sky calibration procedures required by the data pipeline. Here we present the science case, design, and construction status of CHARIS. The design and lessons learned from testing CHARIS highlights the choices that must be considered to design an IFS for high signal-to-noise spectra in a coronagraphic image. The design considerations and lessons learned are directly applicable to future exoplanet instrumentation for extremely large telescopes and space observatories capable of detecting rocky planets in the habitable zone.

Instrument development for the 25 m class optical/infrared Giant Magellan Telescope (GMT) is actively underway. Two instruments have begun their preliminary design phase: an optical (350-1000 nm) high resolution and precision radial velocity echelle spectrograph (G-CLEF), and a near-IR (YJHK) diffraction-limited imager/integral-field-spectrograph (GMTIFS). A third instrument will begin its design phase in early 2015: an optical (370-1000 nm) low-to-medium resolution multi-object spectrograph (GMACS). Two other instrument teams are focusing on prototypes to demonstrate final feasibility: a near-to-mid-IR (JHKLM) high resolution diffraction-limited echelle (GMTNIRS) spectrograph, and a facility robotic multi-fiber-feed (MANIFEST). A brief overview of the GMT instrumentation program is presented: current activities, progress, status, and schedule, as well as a summary of the facility infrastructure needed to support the instruments.

We present the status of the instrumentation programme for the European Extremely Large Telescope. The instrumentation planning is governed by the E-ELT Instrument Roadmap, which synthesises the scientific, technical and managerial influences on the instrument programme into a staged development plan. Preparations for the start of the design and build phases of the first light instruments and their adaptive optics systems are well underway and are summarised here. In parallel, the process for development of the next three instruments has begun. Recent work on the instrument interface to the telescope is described.

We review a conceptual design for a moderate resolution optical spectrograph for the Giant Magellan Telescope (GMT). The spectrograph is designed to make use of the large field-of-view of the GMT and be suitable for observations of very faint objects across a wide range of wavelengths. We also review the status of the instrument and on-going trade studies designed to update the instrument science objectives and technical requirements.

METIS will be among the first generation of scientific instruments on the E-ELT. Focusing on highest angular resolution and high spectral resolution, METIS will provide diffraction limited imaging and coronagraphy from 3-14μm over an 20x20 field of view, as well as integral field spectroscopy at R ~ 100,000 from 2.9-5.3μm. In addition, METIS provides medium-resolution (R ~ 5000) long slit spectroscopy, and polarimetric measurements at N band. While the baseline concept has already been discussed at previous conferences, this paper focuses on the significant developments over the past two years in several areas: The science case has been updated to account for recent progress in the main science areas circum-stellar disks and the formation of planets, exoplanet detection and characterization, Solar system formation, massive stars and clusters, and star formation in external galaxies. We discuss the developments in the adaptive optics (AO) concept for METIS, the telescope interface, and the instrument modelling. Last but not least we provide an overview of our technology development programs, which ranges from coronagraphic masks, immersed gratings, and cryogenic beam chopper to novel approaches to mirror polishing, background calibration and cryo-cooling. These developments have further enhanced the design and technology readiness of METIS to reliably serve as an early discovery machine on the E-ELT.

GMTNIRS, the Giant Magellan Telescope near-infrared spectrograph, is a first-generation instrument for the GMT that will provide detailed spectroscopic information about young stellar objects, exoplanets, and cool and/or obscured stars. The optical and mechanical design GMTNIRS presented at a conceptual design review in October 2011 covered all accessible parts of the spectrum from 1.12 to 5.3 microns at R=50,000 (1.12-2.5 microns) and R=100,000 (3-5.3 microns). GMTNIRS uses the GMT adaptive-optics system and has a single 85 milliarcsecond slit. The instrument includes five separate spectrographs for the different atmospheric windows. By use of dichroics that divide the incident light between five separate spectrographs, it observes its entire spectral grasp in a single exposure while having only one cryogenic moving part, a rotating pupil stop. Large, highly accurate silicon immersion gratings are critical to GMTNIRS, since they both permit a design within the allowable instrument volume and enable continuous wavelength coverage on existing detectors. We describe the effort during the preliminary design phase to refine the design of the spectrograph to meet the science goals while minimizing the cost and risk involved in the grating production. We discuss different design options for the individual spectrographs at R=50,000, 67,000, 75,000, and 100,000 and their impact on science return.

The current instrumentation plan for the E-ELT foresees a High Resolution Spectrograph conventionally indicated as HIRES. Shaped on the study of extra-solar planet atmospheres, Pop-III stars and fundamental physical constants, HIRES is intended to embed observing modes at high-resolution (up to R=150000) and large spectral range (from the blue limit to the K band) useful for a large suite of science cases that can exclusively be tackled by the E-ELT. We present in this paper the solution for HIRES envisaged by the "HIRES initiative", the international collaboration established in 2013 to pursue a HIRES on E-ELT.

We present an overview of the design of IRIS, an infrared (0.84 - 2.4 micron) integral field spectrograph and imaging camera for the Thirty Meter Telescope (TMT). With extremely low wavefront error (<30 nm) and on-board wavefront sensors, IRIS will take advantage of the high angular resolution of the narrow field infrared adaptive optics system (NFIRAOS) to dissect the sky at the diffraction limit of the 30-meter aperture. With a primary spectral resolution of 4000 and spatial sampling starting at 4 milliarcseconds, the instrument will create an unparalleled ability to explore high redshift galaxies, the Galactic center, star forming regions and virtually any astrophysical object. This paper summarizes the entire design and basic capabilities. Among the design innovations is the combination of lenslet and slicer integral field units, new 4Kx4k detectors, extremely precise atmospheric dispersion correction, infrared wavefront sensors, and a very large vacuum cryogenic system.

HARMONI is a visible and near-infrared (0.47 to 2.45 μm) integral field spectrometer, providing the E-ELT's core spectroscopic capability, over a range of resolving powers from R (≡λ/Δλ)~500 to R~20000. The instrument provides simultaneous spectra of ~32000 spaxels at visible and near-IR wavelengths, arranged in a √2:1 aspect ratio contiguous field. HARMONI is conceived as a workhorse instrument, addressing many of the E-ELT’s key science cases, and will exploit the E-ELT's scientific potential in its early years, starting at first light. HARMONI provides a range of spatial pixel (spaxel) scales and spectral resolving powers, which permit the user to optimally configure the instrument for a wide range of science programs; from ultra-sensitive to diffraction limited, spatially resolved, physical (via morphology), chemical (via abundances and line ratios) and kinematic (via line-of-sight velocities) studies of astrophysical sources. Recently, the HARMONI design has undergone substantial changes due to significant modifications to the interface with the telescope and the architecture of the E-ELT Nasmyth platform. We present an overview of the capabilities of HARMONI, and of its design from a functional and performance viewpoint.

The GMT-Consortium Large Earth Finder (G-CLEF) is an optical-band echelle spectrograph that has been selected as the first light instrument for the Giant Magellan Telescope (GMT). G-CLEF is a general-purpose, high dispersion spectrograph that is fiber fed and capable of extremely precise radial velocity measurements. The G-CLEF Concept Design (CoD) was selected in Spring 2013. Since then, G-CLEF has undergone science requirements and instrument requirements reviews and will be the subject of a preliminary design review (PDR) in March 2015. Since CoD review (CoDR), the overall G-CLEF design has evolved significantly as we have optimized the constituent designs of the major subsystems, i.e. the fiber system, the telescope interface, the calibration system and the spectrograph itself. These modifications have been made to enhance G-CLEF’s capability to address frontier science problems, as well as to respond to the evolution of the GMT itself and developments in the technical landscape. G-CLEF has been designed by applying rigorous systems engineering methodology to flow Level 1 Scientific Objectives to Level 2 Observational Requirements and thence to Level 3 and Level 4. The rigorous systems approach applied to G-CLEF establishes a well defined science requirements framework for the engineering design. By adopting this formalism, we may flexibly update and analyze the capability of G-CLEF to respond to new scientific discoveries as we move toward first light. G-CLEF will exploit numerous technological advances and features of the GMT itself to deliver an efficient, high performance instrument, e.g. exploiting the adaptive optics secondary system to increase both throughput and radial velocity measurement precision.

The Universe is comprised of hundreds of billions of galaxies, each populated by hundreds of billions of stars. Astrophysics aims to understand the complexity of this almost incommensurable number of stars, stellar clusters and galaxies, including their spatial distribution, formation, and current interactions with the interstellar and intergalactic media. A considerable fraction of astrophysical discoveries require large statistical samples, which can only be addressed with multi-object spectrographs (MOS). Here we introduce the MOSAIC study of an optical/near-infrared MOS for the European Extremely Large Telescope (E-ELT), which has capabilities specified by science cases ranging from stellar physics and exoplanet studies to galaxy evolution and cosmology. Recent studies of critical technical issues such as sky-background subtraction and multi-object adaptive optics (MOAO) have demonstrated that such a MOS is feasible with current technology and techniques. In the 2020s the E-ELT will become the world’s largest optical/IR telescope, and we argue that it has to be equipped as soon as possible with a MOS. MOSAIC will provide a vast discovery space, enabled by a multiplex of ∼ 200 and spectral resolving powers of R = 5 000 and 20 000. MOSAIC will also offer the unique capability of 10-to-20 ‘high-definition’ (MOAO) integral-field units, optimised to investigate the physics of the sources of reionisation, providing the most efficient follow-up of observations with the James Webb Space Telescope (JWST). The combination of these modes will enable the study of the mass-assembly history of galaxies over cosmic time, including high-redshift dwarf galaxies and studies of the distribution of the intergalactic medium. It will also provide spectroscopy of resolved stars in external galaxies at unprecedented distances, from the outskirts of the Local Group for main-sequence stars, to a significant volume of the local Universe, including nearby galaxy clusters, for luminous red supergiants.

The Multi-Object Broadband Imaging Echellette (MOBIE) is the seeing-limited, visible-wavelength imaging multiobject spectrograph (MOS) planned for first-light use on the Thirty Meter Telescope (TMT). The MOBIE project to date has been a collaboration lead by UC Observatories (CA), and including the UH Institute for Astronomy (HI), and the NAOJ (Tokyo, Japan). The current MOBIE optical design provides two color channels, spanning the 310–550nm and 550-1000nm passbands, and a combination of reflection gratings, prisms, and mirrors to enable direct imaging and three spectroscopic modes with resolutions (λ/triangle λ) of roughly 1000, 3000, and 8000 in both color channels, across a field of view that ranges from roughly 8x3 arcmin to 3x3 arcmin, depending on resolution mode. The conceptual design phase for the MOBIE instrument has been underway since 2008 and is expected to end in 2015. We report here on developments since 2010, including assembly of the current project team, instrument and camera optical designs, instrument control systems, atmospheric dispersion corrector, slit-mask exchange systems, collimator, dichroic and fold optics, dispersing and cross-dispersing optics, refracting cameras, shutters, filter exchange systems, science detector systems, and instrument structures.

The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, will start opera- tion in the next decade and promises new challenges in the development of instruments. The growing field of astrophotonics (the use of photonic technologies in astronomy) can partly solve this problem by allowing mass production of fully integrated and robust instruments combining various optical functions, with the potential to reduce the size, complexity and cost of instruments. In this paper, we focus on developments in integrated micro-spectrographs and their potential for ELTs. We take an inventory of the identified technologies currently in development, and compare the performance of the different concepts. We show that in the current context of single-mode instruments, integrated spectrographs making use of, e.g., a photonic lantern can be a solution to reach the desired performance. However, in the longer term, there is a clear need to develop multimode devices to improve overall the throughput and sensitivity, while decreasing the instrument complexity.

This paper presents the latest optical design for the MOONS triple-arm spectrographs. MOONS will be a Multi-Object Optical and Near-infrared Spectrograph and will be installed on one of the European Southern Observatory (ESO) Very Large Telescopes (VLT). Included in this paper is a trade-off analysis of different types of collimators, cameras, dichroics and filters.

A polarimeter, to observe exoplanets in the visible and infrared, was built for the “Observatoire du Mont Mégantic” (OMM) to replace an existing instrument and reach 10^-6 precision, a factor 100 improvement. The optical and mechanical designs are presented, with techniques used to precisely align the optical components and rotation axes to achieve the targeted precision. A photo-elastic modulator (PEM) and a lock-in amplifier are used to measure the polarization. The typical signal is a high DC superimposed to a very faint sinusoidal oscillation. Custom electronics was developed to measure the AC and DC amplitudes, and characterization results are presented.

We present the science motivation, design, and on-sky test data of a high-throughput fiber coupling unit suitable for automated 1-meter class telescopes. The optical and mechanical design of the fiber coupling is detailed and we describe a flexible controller software designed specifically for this unit. The system performance is characterized with a set of numerical simulations, and we present on-sky results that validate the performance of the controller and the expected throughput of the fiber coupling. This unit was designed specifically for the MINERVA array, a robotic observatory consisting of multiple 0.7 m telescopes linked to a single high-resolution stabilized spectrograph for the purpose of exoplanet discovery using high-cadence radial velocimetry. However, this unit could easily be used for general astronomical purposes requiring fiber coupling or precise guiding.

Usually observational astronomy is based on direction and intensity of radiation considered as a function of wavelength and time. Despite the polarisation degree of radiation provides information about asymmetry, anisotropy and magnetic fields within the radiative source or in the medium along the line of sight, it is commonly ignored. Because of the importance of high resolution spectropolarimetry to study a large series of phenomena related to the interaction of radiation with matter, as in stellar atmospheres or more generally stellar envelopes, we designed and built a dual beam polarimeter for HARPS-N that is in operation at the Telescopio Nazionale Galileo. Since the polarisation degree is measured from the combination of a series of measurements and accuracy is limited by the instrumental stability, just the great stability (0.6 m/s) and spectral resolution (R=115000) of the HARPS-N spectrograph should result in an accuracy in the measurements of Stokes parameters as small as 0.01%. Here we report on the design, realization, assembling, aligning and testing of the polarimetric unit whose first light is planned in August 2014.

We have developed a simple but effective guider for use with the Oxford-SWIFT integral field spectrograph on the Palomar 200-inch telescope. The guider uses mainly off-the-shelf components, including commercial amateur astronomy software to interface with the CCD camera, calculating guiding corrections, and send guide commands to the telescope. The only custom piece of software is an driver to provide an interface between the Palomar telescope control system and the industry standard 'ASCOM' system. Using existing commercial software provided a very cheap guider (<$5000) with minimal (<15 minutes) commissioning time. The final system provides sub-arcsecond guiding, and could easily be adapted to any other professional telescope

TripleSpec 4 (TS4) is a near-infrared (0.8um to 2.45um) moderate resolution (R ~ 3200) cross-dispersed spectrograph for the 4m Blanco Telescope that simultaneously measures the Y, J, H and K bands for objects reimaged within its slit. TS4 is being built by Cornell University and NOAO with scheduled commissioning in 2015. TS4 is a near replica of the previous TripleSpec designs for Apache Point Observatory's ARC 3.5m, Palomar 5m and Keck 10m telescopes, but includes adjustments and improvements to the slit, fore-optics, coatings and the detector. We discuss the changes to the TripleSpec design as well as the fabrication status and expected sensitivity of TS4.

LISS (Line Imager and Slit Spectrograph) is an imager and spectrograph equipped with a liquid crystal etalon and a low resolution grism. It is specialized to observe and map the emission and absorption lines of astronomical objects. A fully depleted and back illuminated 2K x 1K Hamamatsu CCD which has high sensitivity at redder wavelengths in optical bands enables this instrument to give a good performance in imaging and spectroscopic observations of emission lines such as [SIII]λλ 906.9/953.2 nm. We successfully carried out commissioning observations at the 1.6-m Pirka telescope of Hokkaido University in September/October 2012 and June/July 2013. In this paper, we describe the design and performance of LISS as well as its early observational results and future prospects.

WEAVE is the next-generation, wide-field, optical spectroscopy facility for the William Herschel Telescope (WHT) in La Palma, Canary Islands, Spain. The WHT will undergo a significant adaptation to accommodate this facility. A two- degree Prime Focus Corrector (PFC), that includes an Atmospheric Dispersion Compensator, is being planned and is currently in its final design phase. To compensate for the effects of temperature-induced image degradation, the entire PFC system will be translated along the telescope optical axis. The optical system comprises six lenses, the largest of which will have a diameter of 1.1m. Now that the optical elements are in production, the designs for the lens cells and the mounting arrangements are being analysed to ensure that the image quality of the complete system is better than 1.0 arcsec (80% encircled energy diameter) over the full field of view. The new PFC system is designed to be routinely interchanged with the existing top-end ring. This will maximise the versatility of the WHT and allow the two top-end systems to be interchanged as dictated by the scientific needs of the astronomers that will use WEAVE and other instruments on the telescope. This manuscript describes the work that has been carried out in developing the designs for the mechanical subsystems and the plans for mounting the lenses to attain an optical performance that is commensurate with the requirements derived from planning the WEAVE surveys.

We present a conceptual design for a low resolution optical spectrograph for the Astronomical Observatory of Cordoba 1.54m telescope. The simple instrument is required to cover a broad wavelength range (4000A<λ <9000A with 3000A simultaneous coverage) at a resolution of R=λ/∆λ ~ 500, allowing its use as a versatile astronomical spectrograph. In particular, we explore the use of inexpensive commercial off-the-shelf lenses, gratings, and a CCD system to create a small and simple spectrograph that has reasonable performance. We carefully measure properties of the lenses and demonstrate that they have excellent image quality and high throughput.

The work package of the University of Cologne within the GRAVITY consortium included the development and manufacturing of two spectrometers for the beam combiner instrument. Both spectrometers are optimized for different tasks. The science spectrometer provides 3 different spectral resolutions. In the highest resolution the length of the spectral lines is close to the borders of the imaging area of the detector. Also the integration time of these high resolution images is relative long. Therefor the optical pathes have to be controlled by the feedback of a faster spectrometer. The fringe tracking spectrometer has only one low resolution to allow much shorter integration times. This spectrometer provides a feedback for the control loops which stabilize the optical pathes of the light from the telescope to the instrument. This is a new key feature of the whole GRAVITY instrument. Based on the optical layout my work was the design of the mechanical structure, mountings, passive and active adjustment mechanisms. This paper gives a short review about the active mechanisms and the compliant lens mounts. They are used similarly in both spectrometers. Due to the observation and analysis of near-infrared light the mechanisms have to run at cryogenic temperatures and in a high vacuum. Except the linear stages, the motorized mechanisms will get used for several times per observation.

The 4.3m Discovery Channel Telescope (DCT) has been conducting part-time science operations since January 2013. The f/6.1, 0.5° field-of-view at the RC focus is accessible through the Cassegrain instrument cube assembly, which can support 5 co-mounted instruments with rapid feed selection via deployable fold mirrors. Lowell Observatory has developed the Large Monolithic Imager (LMI), a 12.3' FOV 6K x 6K single CCD camera with a dual filter wheel, and installed at the straight-through, field-corrected RC focal station, which has served as the primary early science DCT instrument. Two low-resolution facility spectrographs are currently under development with first light for each anticipated by early 2015: the upgraded DeVeny Spectrograph, to be utilized for single object optical spectroscopy, and the unique Near-Infrared High-Throughput Spectrograph (NIHTS), optimized for single-shot JHK spectroscopy of faint solar system objects. These spectrographs will be mounted at folded RC ports, and the NIHTS installation will feature simultaneous optical imaging with LMI through use of a dichroic fold mirror. We report on the design, construction, commissioning, and progress of these 3 instruments in detail. We also discuss plans for installation of additional facility instrumentation on the DCT.

The new high precision polarimeter for the “Observatoire du Mont Mégantic” (POMM) is an instrument designed to observe exoplanets and other targets in the visible and near infrared wavebands. The requirements to achieve these observation goals are posing unusual challenges to structural and mechanical designers. In this paper, the detailed design, analysis and laboratory results of the key mechanical structure and sub-systems are presented. First, to study extremely low polarization, the birefringence effect due to stresses in the optical elements must be kept to the lowest possible values. The double-wedge Wollaston custom prism assembly that splits the incoming optical beam is made of bonded α-BBO to N-BK-7 glass lenses. Because of the large mismatch of coefficients of thermal expansion and temperatures as low as -40°C that can be encountered at Mont-Mégantic observatory, a finite element analysis (FEA) model is developed to find the best adhesive system to minimize stresses. Another critical aspect discussed in details is the implementation of the cascaded rotating elements and the twin rotating stages. Special attention is given to the drive mechanism and encoding technology. The objective was to reach high absolute positional accuracy in rotation without any mechanical backlash. As for many other instruments, mass, size and dimensional stability are important critera for the supporting structure. For a cantilevered device, such as POMM, a static hexapod is an attractive solution because of the high stiffness to weight ratio. However, the mechanical analysis revealed that the specific geometry of the dual channel optical layout also added an off-axis counterbalancing problem. To reach an X-Y displacement error on the detector smaller than 35μm for 0-45° zenith angle, further structural optimization was done using FEA. An imaging camera was placed at the detector plane during assembly to measure the actual optical beam shift under varying gravitational loading.

The focal plane of the PAU camera is composed of eighteen 2K x 4K CCDs. These devices, plus four spares, were provided by the Japanese company Hamamatsu Photonics K.K. with type no. S10892–04(X). These detectors are 200 μm thick fully depleted and back illuminated with an n-type silicon base. They have been built with a specific coating to be sensitive in the range from 300 to 1,100 nm. Their square pixel size is 15 μm. The read-out system consists of a Monsoon controller (NOAO) and the panVIEW software package. The deafualt CCD read-out speed is 133 kpixel/s. This is the value used in the calibration process. Before installing these devices in the camera focal plane, they were characterized using the facilities of the ICE (CSIC– IEEC) and IFAE in the UAB Campus in Bellaterra (Barcelona, Catalonia, Spain). The basic tests performed for all CCDs were to obtain the photon transfer curve (PTC), the charge transfer efficiency (CTE) using X-rays and the EPER method, linearity, read-out noise, dark current, persistence, cosmetics and quantum efficiency. The X-rays images were also used for the analysis of the charge diffusion for different substrate voltages (VSUB). Regarding the cosmetics, and in addition to white and dark pixels, some patterns were also found. The first one, which appears in all devices, is the presence of half circles in the external edges. The origin of this pattern can be related to the assembly process. A second one appears in the dark images, and shows bright arcs connecting corners along the vertical axis of the CCD. This feature appears in all CCDs exactly in the same position so our guess is that the pattern is due to electrical fields. Finally, and just in two devices, there is a spot with wavelength dependence whose origin could be the result of a defectous coating process.

The Physics of Accelerating Universe Camera (PAUCam) is a new camera for dark energy studies that will be installed in the William Herschel telescope. The main characteristic of the camera is the capacity for high precision photometric redshift measurement. The camera is composed of eighteen Hamamatsu Photonics CCDs providing a wide field of view covering a diameter of one degree. Unlike the common five optical filters of other similar surveys, PAUCam has forty optical narrow band filters which will provide higher resolution in photometric redshifts. In this paper a general description of the electronics of the camera and its status is presented.

We report design and prototype performance of an acousto-optical imaging spectropolarimeter aimed for the 2.5 m telescope at Caucasian Mountain Observatory of Lomonosov Moscow State University. Special geometry of the acousto-optical interaction provides two diffracted beams polarized along the slow and the fast axes of the crystal. The optical system of the spectrometer consisting of plane and elliptical mirrors delivers the images of the object with two orthogonal polarizations to a single CCD matrix, increasing the focal ratio of the telescope.

We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 μm. The spectrograph is comprised of four identical spectrograph modules, with each module collecting roughly 600 spectra from a robotic fiber positioner at the telescope prime focus. Each spectrograph module will have two visible channels covering wavelength ranges 380 nm - 640 nm and 640 nm - 955 nm, and one near infrared (NIR) channel with a wavelength range 955 nm - 1.26 μm. Dispersed light in each channel is imaged by a 300 mm focal length, f/1.07, vacuum Schmidt camera onto a 4k x 4k, 15 µm pixel, detector format. For the NIR channel a HgCdTe substrate-removed Teledyne 1.7 μm cutoff device is used. In the visible channels, CCDs from Hamamatsu are used. These cameras are large, having a clear aperture of 300 mm at the entrance window, and a mass of ~ 250 kg. Like the two visible channel cameras, the NIR camera contains just four optical elements: a two-element refractive corrector, a Mangin mirror, and a field flattening lens. This simple design produces very good imaging performance considering the wide field and wavelength range, and it does so in large part due to the use of a Mangin mirror (a lens with a reflecting rear surface) for the Schmidt primary. In the case of the NIR camera, the rear reflecting surface is a dichroic, which reflects in-band wavelengths and transmits wavelengths beyond 1.26 μm. This, combined with a thermal rejection filter coating on the rear surface of the second corrector element, greatly reduces the out-of-band thermal radiation that reaches the detector. The camera optics and detector are packaged in a cryostat and cooled by two Stirling cycle cryocoolers. The first corrector element serves as the vacuum window, while the second element is thermally isolated and floats cold. An assembly constructed primarily of silicon carbide is used to mount the Mangin mirror, and to support the detector and field flattener. Thermal isolation between the cold optics and warm ambient surroundings is provided by G10 supports, multi-layer insulation, and the vacuum space within the cryostat. In this paper we describe the detailed design of the PFS NIR camera and discuss its predicted optical, thermal, and mechanical performance.

The Rapid infrared IMAger-Spectrometer (RIMAS) is a rapid gamma-ray burst afterglow instrument that will provide photometric and spectroscopic coverage of the Y, J, H, and K bands. RIMAS separates light into two optical arms, YJ and HK, which allows for simultaneous coverage in two photometric bands. RIMAS utilizes two 2048 x 2048 pixel Teledyne HgCdTe (HAWAII-2RG) detectors along with a Spitzer Legacy Indium- Antimonide (InSb) guiding detector in spectroscopic mode to position and keep the source on the slit. We describe the software and hardware development for the detector driver and acquisition systems. The HAWAII- 2RG detectors simultaneously acquire images using Astronomical Research Cameras, Inc. driver, timing, and processing boards with two C++ wrappers running assembly code. The InSb detector clocking and acquisition system runs on a National Instruments cRIO-9074 with a Labview user interface and clocks written in an easily alterable ASCII file. We report the read noise, linearity, and dynamic range of our guide detector. Finally, we present RIMAS’s estimated instrument efficiency in photometric imaging mode (for all three detectors) and expected limiting magnitudes. Our efficiency calculations include atmospheric transmission models, filter models, telescope components, and optics components for each optical arm.

FIFI-LS is the German far-infrared integral field spectrometer for the SOFIA airborne observatory. The instrument offers medium resolution spectroscopy (R ~ a few 1000) in the far-infrared with two independent spectrometers covering 50-110 and 100-200 μm. The integral field units of the two spectrometers obtain spectra covering concentric square fields-of-views sized 3000and 6000, respectively. Both spectrometers can observe simultaneously at any wavelength in their ranges making efficient mapping of far-infrared lines possible. FIFI-LS has been commissioned at the airborne observatory SOFIA as a PI instrument in spring 2014. During 2015, the commissioning as facility instrument will be complete and the SOFIA observatory will take over the operation of FIFI-LS. The instrument can already be used by the community. Primary science cases are the study of the galactic and extra-galactic interstellar medium and its processes. In this presentation, the capabilities of FIFI-LS on the SOFIA telescope will be explained and how they are used by the offered observing modes. The remaining atmosphere and the warm telescope create a high background situation, which requires a differential measurement technique. This is achieved by SOFIA’s chopping secondary mirror and nodding the telescope. Depending on the source size, different observing modes may be used to observe a source. All modes use spatial and spectral dithering. The resulting data products will be 3D-data cubes. The observing parameters will be specified using AOTs, like the other SOFIA instruments, and created via the tool SSPOT which is similar to the Spitzer Space Telescope SPOT tool. The observations will be done in service mode, but SOFIA invites a few investigators to fly onboard SOFIA during (part of) their observations.

We present a status report and early commissioning results for FLITECAM, the 1-5 micron imager and spectrometer for SOFIA (the Stratospheric Observatory for Infrared Astronomy). In February 2014 we completed six flights with FLITECAM mounted in the FLIPO configuration, a co-mounting of FLITECAM and HIPO (High-speed Imaging Photometer for Occultations; PI Edward W. Dunham, Lowell Observatory). During these flights, the FLITECAM modes from ~1-4 μm were characterized. Since observatory verification flights in 2011, several improvements have been made to the FLITECAM system, including the elimination of a light leak in the FLITECAM filter wheel enclosure, and updates to the observing software. We discuss both the improvements to the FLITECAM system and the results from the commissioning flights, including updated sensitivity measurements. Finally, we discuss the utility of FLITECAM in the FLIPO configuration for targeting exoplanet transits.

The previous module on LAMOST (Large Area Multi-Object Fiber Spectroscope Telescope) controls and drives only one fiber positioning unit, resulting in a low integration. Meanwhile, each unit is driven by two motors respectively located on the center revolving shaft and the eccentric revolving shaft. In this case, these positioning units require a mass of power connecting wires that increase flexible connections in excess and decrease the system linearity. To make an improvement, this paper proposes a new module, which occupies small space in compact structure and is able to drive 37 optical fiber positioning units simultaneously. The module design of the controlling part and the driving part are based on FPGA with its strong capabilities of parallel processing, large quantities of I/O resources and low power consumption. With experiments, the new designed module improves the level of system integration, ensures the reliability and reduces the power consumption, which meets all the requirements as expected.

The Large Millimeter Telescope (LMT) is a 50-m dish antenna designed to observe in the wavelength range of 0.85 to 4 mm at an altitude of 4600 m on the summit of Sierra Negra Puebla, Mexico. The telescope has a new atmospheric monitoring system that allows technical staff and astronomers to evaluate the conditions at the site and have enough information to operate the antenna in safe conditions, atmospheric data is also useful to schedule maintenance activities and conduct scientific observations, opacity data is used to calibrate the astronomical data and evaluate the quality of the sky at millimeter wavelengths. In this paper we describe the integration of a weather atmospheric monitoring system and a 225 GHz radiometer to the facilities around the telescope and also describe the hardware integration of these systems and the software methodology used to save and process the data and then make it available in real time to the astronomers and outside world through an internet connection. Finally we present a first set of atmospheric measurements and statistics taken with this new equipment during the wet and dry seasons of 2013/2014.

Many astrophysical applications require precise wavelength calibration of high resolution spectra. Calibration sources for this purpose at near-infrared wavelengths are sparse. We present an experimental setup for an electrodeless microwave discharge lamp that produces molecular band emission spectra. The discharge is sustained inside a glass cell filled with a combination of different gases producing CN molecules with many spectral lines in the wavelength range between 1 μm and 2.5 μm. We investigate this lamp in terms of its usability for wavelength calibration in high resolution spectroscopy. In this conference contribution, we present the experimental setup and the characterization of the calibration source in terms of line identification, line intensities, and line density. We find approximately 20,000 lines in the spectral region of 1 - 2 μm with relative peak intensities in a range of two orders of magnitude. The results from a first endurance test show that the durability of the spectrum requires careful attention in the course of further development.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) is a diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy with low, intermediate and high spectral resolutions in the 0.9 - 2.5 μm wavelength range. FRIDA will be installed at a Nasmyth focus of GTC, behind the AO system. The characteristics and development status of the Control and Housekeeping Electronics are described in this contribution. FRIDA is a collaborative project between the IAC (Spain), UNAM (México), UCM (Spain) and the UF (Florida), lead by UNAM.

WEAVE is the next-generation wide-field optical spectroscopy facility for the William Herschel Telescope (WHT) in La Palma, Canary Islands, Spain. It is a multi-object "pick and place" fibre fed spectrograph with more than one thousand fibres behind a new dedicated 2° prime focus corrector, This is similar in concept to the Australian Astronomical Observatory's 2dF instrument1 with two observing plates, one of which is observing the sky while other is being reconfigured by a robotic fibre positioner. It will be capable of acquiring more than 10000 star or galaxy spectra a night. The WEAVE positioner concept uses two robots working in tandem in order to reconfigure a fully populated field within the expected 1 hour dwell-time for the instrument (a good match between the required exposure times and the limit of validity for a given configuration due to the effects of differential refraction).

The Field Imaging Far Infrared Line Spectrometer (FIFI-LS) obtains spectral data within two wavelength ranges. The observed wavelengths are set by rotating the two diffraction gratings to specific angles. This paper describes on the grating assemblies, designed to rotate and stabilize the gratings. First the assembly itself and its special environment inside FIFI-LS is explained. Then a method is layed out how to monitor the performance of the drive and how to detect upcoming failures before they happen. The last chapter is dedicated to first inflight measurements of the position stability of the grating.

The Rapid Infrared Imager/Spectrometer (RIMAS) is designed to perform follow-up observations of transient astronomical sources at near infrared (NIR) wavelengths (0.9 - 2.4 microns). In particular, RIMAS will be used to perform photometric and spectroscopic observations of gamma-ray burst (GRB) afterglows to compliment the Swift satellite’s science goals. Upon completion, RIMAS will be installed on Lowell Observatory’s 4.3 meter Discovery Channel Telescope (DCT) located in Happy Jack, Arizona. The instrument’s optical design includes a collimator lens assembly, a dichroic to divide the wavelength coverage into two optical arms (0.9 - 1.4 microns and 1.4 - 2.4 microns respectively), and a camera lens assembly for each optical arm. Because the wavelength coverage extends out to 2.4 microns, all optical elements are cooled to ~70 K. Filters and transmission gratings are located on wheels prior to each camera allowing the instrument to be quickly configured for photometry or spectroscopy. An athermal optomechanical design is being implemented to prevent lenses from loosing their room temperature alignment as the system is cooled. The thermal expansion of materials used in this design have been measured in the lab. Additionally, RIMAS has a guide camera consisting of four lenses to aid observers in passing light from target sources through spectroscopic slits. Efforts to align these optics are ongoing.

IO:I is a new instrument in development for the Liverpool Telescope, extending current imaging capabilities beyond the optical and into the near infrared. Cost has been minimised by use of a previously decommissioned instrument’s dewar as the base for a prototype, and retrofitting it with a 1.7μm cutoff Hawaii-2RG HgCdTe detector, SIDECAR ASIC controller and JADE2 interface card. Development of this prototype is nearing completion and will be operational mid 2014. In this paper, the mechanical, electronic and cryogenic facets of the dewar retrofitting process will be discussed together with a description of the instrument control system software/hardware setup. Finally, a brief overview of some initial testing undertaken on the engineering grade array will be given, along with future commissioning plans for the instrument.

Immersion grating is a next-generation diffraction grating which has the immersed the diffraction surface in an optical material with high refractive index of n > 2, and can provide higher spectral resolution than a classical reflective grating. Our group is developing various immersion gratings from the near- to mid-infrared region (Ikeda et al.^{1, 2, 3, 4}, Sarugaku et al.⁵, and Sukegawa et al.6). The internal attenuation α_att of the candidate materials is especially very important to achieve the high efficiency immersion gratings used for astronomical applications. Nevertheless, because there are few available data as α_att < 0.01cm^-1 in the infrared region, except for measurements of CVD-ZnSe, CVD-ZnS, and single-crystal Si in the short near-infrared region reported by Ikeda et al.7, we cannot select suitable materials as an immersion grating in an aimed wavelength range. Therefore, we measure the attenuation coefficients of CdTe, CdZnTe, Ge, Si, ZnSe, and ZnS that could be applicable to immersion gratings. We used an originally developed optical unit attached to a commercial FTIR which covers the wide wavelength range from 1.3μm to 28μm. This measurement system achieves the high accuracy of (triangle)α_att ~ 0.01cm^-1. As a result, high-resistivity single-crystal CdZnTe, single-crystal Ge, single-crystal Si, CVD-ZnSe, and CVD-ZnS show α_att < 0.01cm-1 at the wavelength range of 5.5 - 19.0μm, 2.0 - 10.5μm, 1.3 - 5.4μm, 1.7 - 13.2μm, and 1.9 - 9.2μm, respectively. This indicates that these materials are good candidates for high efficiency immersion grating covering those wavelength ranges. We plan to make similar measurement under the cryogenic condition as T ≤ 10K for the infrared, especially mid-infrared applications.

IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors and for the final (field-flattening) lens in the optical train serve a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise “build to print” design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.

ARNICA and LonGSp are two NICMOS based near infrared instruments developed in the 90's by the Astrophysical Observatory of Arcetri. After more than 10 years from decommissioning we refurbished the two instruments with a new read-out electronics and control software. We present the performances of the refurbished systems and compare them with the historic behavior. Both instruments are currently used for testing purposes in the Lab and at the telescope, we present some example applications.

The MIMIZUKU is the first-generation mid-infrared instrument for the TAO 6.5-m telescope. It challenges to prove the origin of dust and the formation of planets with its unique capabilities, wide wavelength coverage and precise calibration capability. The wide wavelength coverage (2-38 μm) is achieved by three switchable cameras, NIR, MIR-S, and MIR-L. The specifications of the cameras are revised. A 5μm-cutoff HAWAII-1RG is decided to be installed in the NIR camera. The optical design of the MIR-L camera is modified to avoid detector saturation. Its final F-number is extended from 5.2 to 10.5. With these modifications, the field of view of the NIR and MIR-L camera becomes 1.2’ × 1.2’ and 31” × 31”, respectively. The sensitivity of each camera is estimated based on the revised specifications. The precise calibration is achieved by the “Field Stacker” mechanism, which enables the simultaneous observation of the target and the calibration object in different fields. The up-and-down motion of the cryostat (~ 1 t), critical for the Field Stacker, is confirmed to have enough speed (4 mm/s) and position accuracy (~ 50 μm). A control panel for the Field Stacker is completed, and its controllers are successfully installed. The current specifications and the development status are reported.

This paper presents preliminary daytime profiles taken using a Wide-Field Shack-Hartmann Sensor at the Swedish Solar Telescope (SST), La Palma. These are contrasted against Stereo-SCIDAR data from corresponding nights to assess the validity of the assumptions currently used for simulating the performances of possible Multi-Conjugate Adaptive Optics (MCAO) systems for future solar telescopes, especially the assumption that the structure of the high altitude turbulence is mostly similar between the day and the night. We find that for our data both the altitude and the strength of the turbulence differ between the day and the night, although more data is required to draw any conclusions about typical behaviour and conditions.

Since several years the Zurich Imaging polarimeter (ZIMPOL) system is successfully used as a high sensitivity polarimeter. The polarimeter system, which is mainly based on a fast modulator and a special demodulating camera with a masked CCD, has been continuously improved. The third version of the system (ZIMPOL-3) is routinely used at IRSOL, Locarno. The fast modulation allows to “freeze” intensity variations due to seeing, and to achieve a polarimetric sensitivity below 10^-5 if the photon statistics is large enough. In October 2013 the ZIMPOL system has been brought and installed for the first time at the GREGOR telescope in Tenerife for a spectropolarimetric observing campaign. There, the system configuration took advantage from the calibration unit installed at the primary focus of the GREGOR telescope, while the analyzer was inserted in the optical path just before the spectrograph slit after several folding mirrors. This setup has been tested successfully by the authors for the first time in this occasion.

Integral Field Spectroscopy is an innovative technique that is being implemented in the state-of-the-art instruments of the largest night-time telescopes, however, it is still a novelty for solar instrumentation. A new concept of image slicer, called MuSICa (Multi-Slit Image slicer based on collimator-Camera), has been designed for the integral field spectrograph of the 4-m European Solar Telescope. This communication presents an image slicer prototype of MuSICa for GRIS, the spectrograph of the 1.5-m GREGOR solar telescope located at the Observatory of El Teide. MuSICa at GRIS reorganizes a 2-D field of view of 24.5 arcsec into a slit of 0.367 arcsec width by 66.76 arcsec length distributed horizontally. It will operate together with the TIP-II polarimeter to offer high resolution integral field spectropolarimetry. It will also have a bidimensional field of view scanning system to cover a field of view up to 1 by 1 arcmin.

The Gemini Planet Imager (GPI) has as its science instrument an infrared integral field spectrograph/polarimeter (IFS). Integral field spectrographs are scientificially powerful but require sophisticated data reduction systems. For GPI to achieve its scientific goals of exoplanet and disk characterization, IFS data must be reconstructed into high quality astrometrically and photometrically accurate datacubes in both spectral and polarization modes, via flexible software that is usable by the broad Gemini community. The data reduction pipeline developed by the GPI instrument team to meet these needs is now publicly available following GPI’s commissioning. This paper, the first of a series, provides a broad overview of GPI data reduction, summarizes key steps, and presents the overall software framework and implementation. Subsequent papers describe in more detail the algorithms necessary for calibrating GPI data. The GPI data reduction pipeline is open source, available from planetimager.org, and will continue to be enhanced throughout the life of the instrument. It implements an extensive suite of task primitives that can be assembled into reduction recipes to produce calibrated datasets ready for scientific analysis. Angular, spectral, and polarimetric differential imaging are supported. Graphical tools automate the production and editing of recipes, an integrated calibration database manages reference files, and an interactive data viewer customized for high contrast imaging allows for exploration and manipulation of data.

The KOALA optical fibre feed for the AAOmega spectrograph has been commissioned at the Anglo-Australian Telescope. The instrument samples the reimaged telescope focal plane at two scales: 1.23 arcsec and 0.70 arcsec per image slicing hexagonal lenslet over a 49x27 and 28x15 arcsec field of view respectively. The integral field unit consists of 2D hexagonal and circular lenslet arrays coupling light into 1000 fibres with 100 micron core diameter. The fibre run is over 35m long connecting the telescope Cassegrain focus with the bench mounted spectrograph room where all fibres are reformatted into a one-dimensional slit. Design and assembly of the KOALA components, engineering challenges encountered, and commissioning results are discussed.

Pushing the RV technique to the precision required to detect Earth-like planets around Solar-type stars requires extreme stability in the wavelength calibrator. We are developing a wavelength calibration technique based on a Fabry-Perot interferometer locked to a stabilized laser. This approach offers advantages over other methods: it produces a broadband, emission comb output from 380-790 nm that is difficult to achieve with a laser frequency comb; by injecting into the science fibers before and after observations, weak signals from velocities in the stellar photosphere that would be masked by iodine reference lines can be now be identified; and by locking the laser to an atomic transition, the spectrum will be stabilized to better than 1 part in 10 e-11, corresponding to a wavelength solution that is known to better than 1 cms^-1.

We report three winter seasons and two full summer from August 2011 to April 2014 of atmospheric opacity measurements with a 225GHz tipping radiometer at Summit camp in Greenland (Latitude 72°.57 N, Longitude 38°.46 W, Elevation 3250 masl). The summit of the ice cap in Greenland is expected to be the location for the GreenLand Telescope (GLT), a 12 meters aperture millimeter / sub-millimeter telescope with VLBI and single- dish capability. The winter regime (November to April) is of particular interest for sub-millimeter observations since the opacities lower quartile in these months can get as low as 0.042, with occasional opacities as low as 0.025. We then compare Summit zenith opacities to other submillimeter sites.

Multichannel Subtractive Double Pass (MSDP) spectrographs have been widely used in solar spectroscopy because of their ability to provide an excellent compromise between field of view and spatial and spectral resolutions. Compared with other types of spectrographs, MSDP can deliver simultaneous monochromatic images at higher spatial and spectral resolutions without any time-scanning requirement (as with Fabry-Perot spectrographs), and with limited loss of flux. These performances are obtained thanks to a double pass through the dispersive element. Recent advances with VPH (Volume phase holographic) Grisms as well as with image slicers now make MSDP potentially sensitive to much smaller fluxes. We present S4EI (Spectral Sampling with Slicer for Stellar and Extragalactical Instrumentation), which is a new concept for extending MSDP to night-time astronomy. It is based on new generation reflecting plane image slicers working with large apertures specific to night-time telescopes. The resulting design could be potentially very attractive and innovative for different domains of astronomy, e.g., the simultaneous spatial mapping of accurately flux-calibrated emission lines between OH sky lines in extragalactic astronomy or the simultaneous imaging of stars, exoplanets and interstellar medium. We present different possible MSDP/S4EI configurations for these science cases and expected performances on telescopes such as the VLT.

We have developed a visible imager and spectrograph, Nayoro Optical Camera and Spectrograph (NaCS), in- stalled at the f/12 Nasmyth focus of the 1.6-m Pirka telescope of the Hokkaido University in Hokkaido, Japan. The optical and mechanical design is similar to that of WFGS2 of the University of Hawaii 2.2-m telescope (UH88), however the camera is newly designed. The spectral coverage is 380–970 nm, and the field of view is 8.4 × 4.5 arcmin with a pixel scale of 0.247 arcsec pixel-1. The SDSS (g', r', i', z') filters, Johnson (B, V ) filters and a replica grism (R ~300 at 650 nm) are equipped. The slit width can be selected from 2, 3, and 4 arcsec. We selected a 2kx1k fully-depleted back-illuminated Hamamatsu CCD as a detector, because it has a high quantum efficiency (≥ 80 %) over optical wavelength. The Kiso Array Controller (KAC) is used as a CCD controller. The first light observation was done on November 2011. NaCS is used mainly for long-term spectroscopic monitor of active galactic nuclei. It is also used for several astronomical observations such as light-curve measurements of asteroids and search of pre-main-sequence stars and brown dwarfs by slit-less spectroscopy as a major facility instrument of the Pirka telescope. We present the design, construction, integration, and performance of this instrument.

HARPS-N (High-Accuracy Radial-Velocity planetary Search) is an instrument designed for the measurement of Radial Velocities (RV) at highest accuracy. It is located in the Northern hemisphere and installed at the TNG on La Palma Island. It has allowed scientists to confirm and characterize Earth-like mass planets: Kepler-78b. In this paper, we present the design of Instrument Control Software (ICS) based on LabVIEW, the key features of implementation such as the XML-RPC, labVIEW Classes and Shared Variables. We also present here the auto-guiding and fibre hole finding algorithm. Use of XML-RPC in Labview for ICS with COTS hardware has made the development of HARAPS-N ICS easily in implementing and integrating with other software in a limited construction time scale.

It is proposed the development and implementation of a High Speed Resolution Camera instrument. The basic principle of this technique is to take several pictures of short exposure using different filters of an astronomical object of interest . These images are subsequently processed using specialized software to remove aberrations from atmosphere and from the instrument itself such as blur and scintillation among others. In this paper are described electronic and control systems implemented for BERKUT instrument based on FPGA (Field Programmable Gate Array) generated with VHDL description. An UART communication, using serial protocol, is used with a friendly User Interface providing an easy way for the astronomer to choose between different lenses and different filters for capturing the images. All the movements are produced by stepper motors that are driven by a circuit that powers all the electronics. The camera and the lenses are placed into a linear positioner with the help of a stepper motor which give us repeatable movements for positioning these optical components. Besides it is planned to integrate in the same system a pipeline for image data reduction to have one sturdy system that could fulfill any astronomer needs in the usage of this technique. With this instrument we pretend to confirm the Hipparcos catalogue of binary stars besides finding exoplanets. This technique requires more simple optical equipment and it is less sensitive to environmental noise, making it cheaper and provides good quality and great resolution images for scientific purposes. This equipment will be installed on different 1-m class telescopes in Mexico1 and probably other countries which makes it a wide application instrument.

The Visual Integral-Field Replicable Unit Spectrograph (VIRUS) instrument is a baseline array 150 identical fiber fed optical spectrographs designed to support observations for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The collimator subassemblies of the instrument have been assembled in a production line and are now complete. Here we review the design choices and assembly practices used to produce a suite of identical low-cost spectrographs in a timely fashion using primarily unskilled labor.

Several factors make observational astronomy difficult for astronomers; one of them is the atmosphere. The light that a star emits is refracted when it goes through the earth's atmosphere; the result of this is that the image of a punctual star is not what the physics would lead us to expect. At the Instituto de Astronomia of the Universidad Nacional Autonoma de México (IA-UNAM) an instrument has been developed called "Berkut", which uses a high resolution technique to improve these effects and obtain interesting and valuable scientific studies. In this paper we present the mechanical reengineering and acceptance test of Berkut. This instrument was design for taking images of high resolution. Essentially, it is composed by a set basic optics which is aligned and in focus with a 1- meter class telescope. It has its own electronic components for controlling remotely a filter wheel; that allows the exchange of the filters according to the requirements of the observer, a couple of objectives mounted in a translation stage, and a CCD camera for acquiring several images per second that are used in the speckle interferometry technique. A project like Berkut needs to be multidisciplinary; astronomy, engineering, optics, mechanics, electronics, and image processing are some of the areas of knowledge used. Berkut will be used in the telescope of the Observatorio Astronomico Nacional in Tonantzintla, located in the state of Puebla, Mexico, but it can be used in any telescope 1 meter class. It is pretended to build another Berkuts for being used simultaneously in different telescopes, so it is important to keep the costs as low as possible. With this instrument we pretend to confirm the Hipparcos catalogue of binary stars besides finding exoplanets.

This paper describes the design of a remote, automatic all-sky camera for capturing bright meteor trails based on a DSLR camera combined with Liquid Crystal shutter technology for angular velocity measurement. Design, performance and first results are discussed, as well the up scaling towards a large autonomous network for accurate fireball orbit determination and meteorite recovery.

The LBT (Large Binocular Telescope) located in Mount Graham near Tucson/Arizona at an altitude of about 3200m, is an innovative project being undertaken by institutions from Europe and USA. The structure of the telescope incorporates two 8.4-meter telescopes on a 14.4 center-to-center common mount. This configuration provides the equivalent collecting area of a 12m single-dish telescope. LINC-NIRVANA is an instrument to combine the light from both LBT primary mirrors in an imaging Fizeau interferometer. Many requirements must be fulfilled in order to get a good interferometric combination of the beams, being among the most important plane wavefronts, parallel input beams, homotheticity and zero optical path difference (OPD) required for interferometry. The philosophy is to have an internally aligned instrument first, and then align the telescope to match the instrument. The sum of different subsystems leads to a quite ambitious system, which requires a well-defined strategy for alignment and testing. In this paper I introduce and describe the followed strategy, as well as the different solutions, procedures and tools used during integration. Results are presented at every step.

SPHERE (Spectro-Polarimetric High-contrast Exoplanet Research) is a new instrument for the VLT aimed at the direct detection of exo-planets. It has received its first light in May 2014. ZIMPOL (Zurich Imaging Polarimeter) is the imaging polarimeter subsystem of the SPHERE instrument. It's capable of both high accuracy and high sensitivity polarimetry but can also be used as a classical imager. It is located behind an extreme AO system and a stellar coronagraph. ZIMPOL operates at visible wavelengths (600-900 nm) which is best suited to detect the very faint reflected and hence polarized visible light from extra solar planets. It has an instantaneous Field of View of 3 x 3 arcsec2 (extendable to 8 arcsec diameter) with an angular resolution of 14 mili-arcsec. We discuss the results that are obtained from the full SPHERE-ZIMPOL system testing. In particular the optical, polarimetric and high contrast performance.

PANIC is the new PAnoramic Near-Infrared camera for Calar Alto, a joint project by the MPIA in Heidelberg, Germany, and the IAA in Granada, Spain. It can be operated at the 2.2m or 3.5m CAHA telescopes to observe a field of view of 30'x30' or 15'x15' respectively, with a sampling of 4096x4096 pixels. It is designed for the spectral bands from Z to K, and can be equipped with additional narrow-band filters. The instrument is close to completion and will be delivered to the observatory in Spain in fall 2014. It is currently in the last stage of assembly, where the optical elements are being aligned, which will be followed by final laboratory tests of the instrument. This paper contains an update of the recent progress and shows results from the optical alignment and detector performance tests.

We present the design and lab performance of the Parallel Imager for Southern Cosmology Observations (PISCO), a photometer for the 6.5 m diameter Magellan telescopes that produces g^l, r^l, i^l, and z^l band images simulta- neously within a 9 arcminute field of view. This design provides efficient follow-up observations of faint sources, particularly galaxy clusters and supernovae. Simultaneous imaging speeds the observing cadence by at a factor of ~ 3 (including optical losses) compared to other photometric imagers. Also, the determination of color (flux ratio between bands) is relatively immune to time variations in gray opacity due to clouds, so observations can proceed in less than optimal conditions. First light is expected in September 2014 2014.

SITELLE is an imaging FTS that will become a guest instrument at the Canada-France-Hawaii telescope (CFHT) by the end of 2014. This paper describes the final optical design of SITELLE, shows how the compliance of the sub-optical components with the design was evaluated, and presents results of the measured optical quality.

The Gemini Planet Imager (GPI) is a next-generation, facility instrument currently being commissioned at the Gemini South observatory. GPI combines an extreme adaptive optics system and integral field spectrograph (IFS) with an apodized-pupil Lyot coronagraph (APLC) producing an unprecedented capability for directly imaging and spectroscopically characterizing extrasolar planets. GPI’s operating goal of 10^-7 contrast requires very precise alignments between the various elements of the coronagraph (two pupil masks and one focal plane mask) and active control of the beam path throughout the instrument. Here, we describe the techniques used to automatically align GPI and maintain the alignment throughout the course of science observations. We discuss the particular challenges of maintaining precision alignments on a Cassegrain mounted instrument and strategies that we have developed that allow GPI to achieve high contrast even in poor seeing conditions.

A new technological development, the laser driven light source (LDLS), in which a laser excited plasma emits intense continuum radiation over a wide wavelength range from well below the atmospheric cut-off up to 800 nm, promises to greatly improve our ability to provide high quality flat-fields for astronomical spectrographs. Its particular strength lies in the ground-based ultraviolet (UV). We report on tests conducted with a LDLS using FORS2, UVES, X-Shooter and CRIRES at ESO’s Very Large Telescope (VLT) in August 2013. Comparison with standard calibration sources such as halogen and deuterium lamps shows that with the LDLS flat-fields with a better balanced dynamic range and excellent signal to noise ratio can be achieved within short exposure times. This will enable higher quality science at the short wavelength end of existing spectrographs at the VLT. Furthermore the LDLS provides exceptional stability and long lifetime as important operational aspects. Optimised UV spectrographs such as the proposed CUBES (wavelength range 300-400 nm) project will be able to take full advantage of this development removing the long-standing limitation of signal to noise ratios of UV flat-fields.

In the large-scale, Dark Energy Spectroscopic Instrument (DESI), thousands of fiber positioners will be used. Those are robotic positioners, with two axis, and having the size of a pen. They are tightly packed on the focal plane of the telescope. Dedicated micro-robots have been developed and they use 4mm brushless DC motors. To simplify the implementation and reduce the space occupancy, each actuator will integrate its own electronic control board. This board will be used to communicate with the central trajectory generator, manage low level control tasks and motor current feeding. In this context, we present a solution for a highly compact electronic. This electronic is composed of two layers. The first is the power stage that can drive simultaneously two brushless motors. The second one consists of a fast microcontroller and deals with different control tasks: communication, acquisition of the hall sensor signals, commutation of the motors phases, and performing position and current regulation. A set of diagnostic functions are also implemented to detect failure in the motors or the sensors, and to sense abnormal load change that may be the result of two robots colliding.

We have designed and evaluated a Miniature Cryogenic Scanning Fabry-Perot (MCSF) interferometer which can be inserted into the optical path of a mid-IR camera to observe fine structure lines in the 25-40 μm wavelength regime. The MCSF uses free standing metal meshes as its filters and can scan over a length of ~2 mm. The short wavelength range in which the MCSF will be used requires very tight fabrication tolerances to maintain the parallelism of the meshes to within 0.15 μm and to obviate the need for dynamic parallelizing adjusters. A monolithic notch flexure design delivers these properties and minimizes the number of moving parts, maximizing reliability. The scanning mechanism includes a cryogenic stepper motor that drives a miniature fine-adjustment screw via a worm gear assembly. This allows for a step resolution of 1 step ~ 14 nm when operating in full step mode. Finite Element Analysis of the MCSF’s monolithic flexure guided the design and confirmed that the MCSF will remain within required limits over the course of operation. We developed the MCSF for use in the mid-IR camera FORCAST on the 2.5 meter SOFIA telescope.

We report on our development of a near-infrared multi-object spectrograph for ground-based applications using the micro-shutter array, which was originally developed for the Near Infrared Spectrograph of the James Webb Space Telescope. The micro-shutter array in this case acts as a source selector at a reimaged telescope focal plane. The developed spectrograph will be implemented either with ground-layer adaptive optics system or multi-conjugate adaptive optics system on a large telescope. This will enable for the first time fully reconfigurable infrared multi-object spectroscopy with adaptive optics systems. We envision studying diverse astronomical objects with our spectrograph, including high-redshift galaxies, galaxy clusters and super star clusters.

The SuMIRe Prime Focus Spectrograph (PFS), developed for the 8-m class SUBARU telescope, will consist of four identical spectrographs, each receiving 600 fibers from a 2394 fiber robotic positioner at the telescope prime focus. Each spectrograph includes three spectral channels to cover the wavelength range [0.38-1.26] um with a resolving power ranging between 2000 and 4000. A medium resolution mode is also implemented to reach a resolving power of 5000 at 0.8 um. Each spectrograph is made of 4 optical units: the entrance unit which produces three corrected collimated beams and three camera units (one per spectral channel: "blue, "red", and “NIR”). The beam is split by using two large dichroics; and in each arm, the light is dispersed by large VPH gratings (about 280x280mm). The proposed optical design was optimized to achieve the requested image quality while simplifying the manufacturing of the whole optical system. The camera design consists in an innovative Schmidt camera observing a large field-of-view (10 degrees) with a very fast beam (F/1.09). To achieve such a performance, the classical spherical mirror is replaced by a catadioptric mirror (i.e meniscus lens with a reflective surface on the rear side of the glass, like a Mangin mirror). This article focuses on the optical architecture of the PFS spectrograph and the perfornance achieved. We will first described the global optical design of the spectrograph. Then, we will focus on the Mangin-Schmidt camera design. The analysis of the optical performance and the results obtained are presented in the last section.

We describe designs for spectrometers employing convex dispersers. The Offner spectrometer was the first such instrument; it has almost exclusively been employed on satellite platforms, and has had little impact on ground-based instruments. We have learned how to fabricate curved Volume Phase Holographic (VPH) gratings and, in contrast to the planar gratings of traditional spectrometers, describe how such devices can be used in optical/infrared spectrometers designed specifically for curved diffraction gratings. Volume Phase Holographic gratings are highly efficient compared to conventional surface relief gratings; they have become the disperser of choice in optical / NIR spectrometers. The advantage of spectrometers with curved VPH dispersers is the very small number of optical elements used (the simplest comprising a grating and a spherical mirror), as well as illumination of mirrors off axis, resulting in greater efficiency and reduction in size. We describe a “Half Offner" spectrometer, an even simpler version of the Offner spectrometer. We present an entirely novel design, the Spherical Transmission Grating Spectrometer (STGS), and discuss exemplary applications, including a design for a double-beam spectrometer without any requirement for a dichroic. This paradigm change in spectrometer design offers an alternative to all-refractive astronomical spectrometer designs, using expensive, fragile lens elements fabricated from CaF2 or even more exotic materials. The unobscured mirror layout avoids a major drawback of the previous generation of catadioptric spectrometer designs. We describe laboratory measurements of the efficiency and image quality of a curved VPH grating in a STGS design, demonstrating, simultaneously, efficiency comparable to planar VPH gratings along with good image quality. The stage is now set for construction of a prototype instrument with impressive performance.

Optical tolerances are specified to achieve the desired performance of any optical system. Traditionally the diverse sets of tolerances of a system are proposed by the designer of each of the subsystems. In this work we propose a method to corroborate the design tolerances and simultaneously to provide extra data of each parameter to the manufacturer. It consists of an inverse analysis in which we fix a modified merit function as a constant and evaluate distinct models of perturbed lenses via Monte Carlo simulations, determining the best possible tolerance for each parameter, and indirectly providing information of sensitivity of the parameters. The method was used to carry out an extensive tolerance analysis of MEGARA, a multi-object spectrograph in development for the GTC. The key parameters of the optics are discussed, the overall performance is tested and diverse recommendations and adjustments to the design tolerances are made towards fabrication at INAOE and CIO in Mexico.

CIRCE is a near-infrared (1-2.5 micron) imager, polarimeter and low-resolution spectrograph intended as a visitor instrument for the Gran Telescopio Canarias 10.-4m telescope. It was built largely by graduate students and postdocs, with help from the UF astronomy engineering group, and is funded by the University of Florida and the U.S. National Science Foundation. CIRCE is intended to help fill the gap in time between GTC first light and the arrival of EMIR, and will also provide the following scientific capabilities to compliment EMIR after its arrival: high- resolution imaging, narrowband imaging, high-time-resolution photometry, imaging- and spectro- polarimetry, low-resolution spectroscopy. In this poster, we review the lab testing results for CIRCE from 2013 and describe the instrument status (currently in shipment to GTC).