Paper
26 June 1986 Effect Of Added Si On The Resistivity Of Co And Ni Films
S.-J. Kim, Y.-T. Cheng, M-A. Nicolet
Author Affiliations +
Abstract
Chemical and electrical changes in Co/Si and Ni/Si bilayered films on Si02 substrates are investigated. The Si thicknesses chosen correspond to 0 to 11 atomic percent of the total film. After the films were vacuum annealed at 400, 500, 600, 700, 800, and 900°C for 1 hour, they were examined by means of 4He+ backscattering spectrometry, x-ray Read camera and diffractometer, scanning electron and optical microscopy, and four point probe resistivity measurements. At low annealing temperatures, we observe the Ni5Si2, Ni3Si and Co2Si phases. At 800 and 900°C, Si dissolves in the film. The film resistivity increses rapidly as the amount of dissolved Si in the film rises. For example, 2 at.% and 3.6 at.% suffice to double the film resistivity of Co and Ni, respectively. The lattice parameter perpendicular to the plane of the film for films annealed at 900°C was determined at room temperature and found to decrease with increasing Si content. The surface of a pure metal film becomes nonuniform upon 900°C annealing; adding as little as 2.5 at.% Si stabilizes the film morphology.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S.-J. Kim, Y.-T. Cheng, and M-A. Nicolet "Effect Of Added Si On The Resistivity Of Co And Ni Films", Proc. SPIE 0623, Advanced Processing and Characterization of Semiconductors III, (26 June 1986); https://doi.org/10.1117/12.961217
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Nickel

Annealing

Cobalt

Solids

Metals

X-ray diffraction

Back to Top