Paper
24 February 2017 Development of 100W class blue direct diode laser coating system for laser metal deposition
Author Affiliations +
Proceedings Volume 10095, Laser 3D Manufacturing IV; 100950X (2017) https://doi.org/10.1117/12.2250263
Event: SPIE LASE, 2017, San Francisco, California, United States
Abstract
Laser cladding technique is widely used for industrial application such as oil, energy industry, and aircraft and so on because it is able to repair and to form a near net shape. This process have been employed infrared lasers with wavelength of 0.8-10.6μm since output power of these lasers have over 1000W. Metal processing efficiency was, however, low in these wavelength, because the absorption was low. Thus, we developed the laser cladding system with blue direct diode laser at the wavelength of 445nm. 6 blue diode lasers was combined on the focusing spot to reach the output power of 100W by a lens, which one blue diode laser module was maximum output power of 20W. By using this laser cladding system, a pure copper film coating on a SUS304 stainless steel plate was demonstrated from a copper powder. As the result, the copper layer was formed on SUS304 stainless steel plate at the width of 322μm and thickness of 534μm was formed on the substrate.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Higashino, M. Tsukamoto, Y. Sato, N. Abe, K. Asano, and Y. Funada "Development of 100W class blue direct diode laser coating system for laser metal deposition", Proc. SPIE 10095, Laser 3D Manufacturing IV, 100950X (24 February 2017); https://doi.org/10.1117/12.2250263
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Copper

Coating

Laser systems engineering

Cladding

Metals

Laser development

Back to Top