Effective use of aerial image metrology for calibration of OPC models

Ao Chen; Yee Mei Foong; Thomas Thaler; Ute Buttgereit; Angeline Chung; Andrew Burbine; John Sturtevant; Chris Clifford; Kostas Adam; Peter DeBisschop

doi:10.1117/12.2258632

24 March 2017 Effective use of aerial image metrology for calibration of OPC models

Ao Chen, Yee Mei Foong, Thomas Thaler, Ute Buttgereit, Angeline Chung, Andrew Burbine, John Sturtevant, Chris Clifford, Kostas Adam, Peter DeBisschop

Author Affiliations +

Proceedings Volume 10147, Optical Microlithography XXX; 101470Y (2017) https://doi.org/10.1117/12.2258632
Event: SPIE Advanced Lithography, 2017, San Jose, California, United States

Abstract

The appropriate representation of the photomask in the simulation of wafer lithography processes has been shown to be of vital importance for 14-nm and below [1]. This task is difficult, since accurate optical metrology and physical metrology of the three-dimensional mask structure is not always available. OPC models for wafer patterning comprise representations of the mask, the optics, and the photoresist process. The traditional calibration of these models has involved empirical tuning of model parameters to CD-SEM data from printed photoresist patterns. Such a flow necessarily convolves the resist effects and it has been difficult to reliably obtain mask and optical parameters which are most representative of physical reality due to aliasing effects. In this work, we have undertaken to decouple the mask model from the photoresist process by use of the ZEISS Wafer-Level CD (WLCD) tool based upon aerial image metrology. By measuring the OPC test pattern mask with WLCD, the mask parameters in the OPC model can be tuned directly without interference of resist effects. This work utilized 14-nm,10-nm, and 7-nm node masks, and we demonstrate that the use of such a flow leads to the most predictive overall OPC models, and that the mask parameters resulting from this flow more closely match the expected physical values. More specifically, the mask corner rounding, sidewall angle, and bias values were tuned to the WLCD data instead of the wafer CD SEM data, and resulted in improved predictive capability of the model. Furthermore, other mask variables not traditionally tuned can be verified or tuned by matching simulation to aerial image metrology.

Conference Presentation

Citation Download Citation

Ao Chen, Yee Mei Foong, Thomas Thaler, Ute Buttgereit, Angeline Chung, Andrew Burbine, John Sturtevant, Chris Clifford, Kostas Adam, and Peter DeBisschop "Effective use of aerial image metrology for calibration of OPC models", Proc. SPIE 10147, Optical Microlithography XXX, 101470Y (24 March 2017); https://doi.org/10.1117/12.2258632

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available