Presentation + Paper
6 July 2018 Dome seeing monitor and its results for the 4m Blanco telescope
Author Affiliations +
Abstract
Optical distortions arising from inhomogeneous air in the telescope dome can be a non-negligible contributor to the delivered image quality (DIQ). Optimization of the dome environment is particularly important for first-class wide-angle imagers, such as the DECAM on the 4-m Blanco telescope, Omegacam at CFHT and, in the future, LSST. However, the standard method of comparing the DIQ with the site seeing does not single out the effect of the dome, being affected by contributions from other sources and by biases. We developed the dome seeing monitor for the Blanco telescope. It propagates the collimated 4-cm beam from the mirror cell to the top ring and back, parallel to the main beam. The angle-of-arrival fluctuations on this 10 m long path gives a quantitative estimate of the dome seeing. We describe the instrument and its software. The results for the Blanco telescope are presented. The median dome seeing is around 0.2 00. It shows the expected dependence on the temperature difference with the outside air and on the speed and direction of the wind.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Edison Bustos and Andrei Tokovinin "Dome seeing monitor and its results for the 4m Blanco telescope", Proc. SPIE 10700, Ground-based and Airborne Telescopes VII, 107000Q (6 July 2018); https://doi.org/10.1117/12.2309652
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Domes

Mirrors

Space telescopes

Turbulence

Atmospheric propagation

Cameras

RELATED CONTENT

LOTUCE2: a dome-seeing instrument for the E-ELT
Proceedings of SPIE (July 28 2014)
First light of the LINC-NIRVANA Pathfinder experiment
Proceedings of SPIE (July 21 2014)
Optical design of Gemini Altair
Proceedings of SPIE (September 11 1998)

Back to Top