A preliminary study of in-situ defects measurement for additive manufacturing based on multi-spectrum

Xing Peng; Lingbao Kong; Yao Chen; Junhua Wang; Min Xu

doi:10.1117/12.2504800

6 February 2019 A preliminary study of in-situ defects measurement for additive manufacturing based on multi-spectrum

Xing Peng, Lingbao Kong, Yao Chen, Junhua Wang, Min Xu

Author Affiliations +

Proceedings Volume 10842, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Subdiffraction-limited Plasmonic Lithography and Innovative Manufacturing Technology; 1084217 (2019) https://doi.org/10.1117/12.2504800
Event: Ninth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2018), 2018, Chengdu, China

Abstract

Additive Manufacturing (AM) technology is considered as one of the most promising manufacturing technologies in the areas of aerospace and defense industries. However, a lack of assurance of quality with AM parts is a key technological barrier that prevents manufacturers from adopting AM technologies, especially for high value added applications. Therefore, it is critically important to monitor the quality of products during the AM process. In this paper, current process monitoring especially the defects measurement for metal AM in Powder Bed Fusion (PBF) was firstly reviewed. And then, an optical in-situ inspection method based on multi-spectrum is proposed. The optical measuring system with infrared and white light imaging system is designed and optimized. Imaging data fusion algorithms is proposed to obtain the enhanced measuring results from infrared and white light imaging system. Simulation studies were undertaken to verify the validity of the proposed monitoring system. The research work is helpful for the optimization of process parameters so as to control the quality in the AM process.

Citation Download Citation

Xing Peng, Lingbao Kong, Yao Chen, Junhua Wang, and Min Xu "A preliminary study of in-situ defects measurement for additive manufacturing based on multi-spectrum ", Proc. SPIE 10842, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Subdiffraction-limited Plasmonic Lithography and Innovative Manufacturing Technology, 1084217 (6 February 2019); https://doi.org/10.1117/12.2504800

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE