Paper
28 December 2018 Experimental study on laser power influence for diamond grits brazing
Weihong Yang, Longsheng Xiao, Hanyuan Chen, Xue Zhang, Xiahui Tang
Author Affiliations +
Proceedings Volume 10964, Tenth International Conference on Information Optics and Photonics; 109646V (2018) https://doi.org/10.1117/12.2515489
Event: Tenth International Conference on Information Optics and Photonics (CIOP 2018), 2018, Beijing, China
Abstract
High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits, the paper studied the influence of laser power on brazing layer combination performance and diamond grits thermal damage, analyzed the thermal damage mechanism of laser brazed diamond and combination mechanism of brazing layer and diamond grits. The research result showed that laser power is one of factors for diamond thermal damage, under high laser energy input, oxidation took place between diamond grits and oxygen outside, diamond would be oxidized all along on the condition of branch gas pressure about free equation until the balance established between diamond and oxide, during this process, diamond grits would be carbonized or burn out and gasify.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weihong Yang, Longsheng Xiao, Hanyuan Chen, Xue Zhang, and Xiahui Tang "Experimental study on laser power influence for diamond grits brazing", Proc. SPIE 10964, Tenth International Conference on Information Optics and Photonics, 109646V (28 December 2018); https://doi.org/10.1117/12.2515489
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diamond

Gas lasers

Oxidation

Metals

Laser applications

Oxygen

Carbon monoxide

RELATED CONTENT

Welding with the thin disc laser new processing and...
Proceedings of SPIE (October 11 2005)
High-power lasers for industrial and ecological use
Proceedings of SPIE (December 22 1998)
The Laser vs the Electron Beam In Welding And Surface...
Proceedings of SPIE (October 21 1986)
LaserHybrid welding for industrial applications
Proceedings of SPIE (April 26 2007)

Back to Top