Poster + Presentation + Paper
9 October 2021 Study of a liquid level sensor based on a tilted long period grating imprinted on a plastic optical fiber
Author Affiliations +
Conference Poster
Abstract
A tilted long period grating (LPG) fabricated on a commercial plastic optical fiber (POF) by a simple mechanical die-press-print method was proposed for liquid-level sensing. The liquid level sensing performances of the sensor with different structural parameters were studied theoretically and experimentally. The results show that when the LPG fabricated on a POF with a diameter of 0.25mm and a tilted angle of 30° and the groove depth of 75μm, the highest sensitivity of -0.4631dB/mm was obtained in the level range of 20mm. Additionally, the influences of temperature on the liquid-level sensing performances of sensors were also studied. It shows that the sensitivity of the sensor was decreased with the increase of temperature.
Conference Presentation
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haiyang Bao, Bingcheng Wu, Yuan Liu, Yanfei Zhou, and Jie Zheng "Study of a liquid level sensor based on a tilted long period grating imprinted on a plastic optical fiber", Proc. SPIE 11901, Advanced Sensor Systems and Applications XI, 119010U (9 October 2021); https://doi.org/10.1117/12.2600857
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Phase only filters

Sensors

Polymer optical fibers

Cladding

Fiber optics sensors

Modulation

Back to Top