Paper
1 May 1990 Two holographic methods for flatness testing with subwavelength or multiple-wavelength sensitivities
Pierre M. Jacquot, Pierre Michel Boone
Author Affiliations +
Proceedings Volume 1212, Practical Holography IV; (1990) https://doi.org/10.1117/12.17983
Event: OE/LASE '90, 1990, Los Angeles, CA, United States
Abstract
Two holographic methods suited for the measurement of flatness deviation are presented. The first one takes advantage of the basic holographic interferometry arrangement usually meant for deformation analysis of rough bodies. Simple modifications allow flatness measurements of polished surfaces with sub-wavelength sensitivity. Secondly, a new desensitized interferometer is described allowing the measurement of rougher objects, more frequently encountered in engineering practice. The key component of this interferometer is a diffractive optical element produced by recording two wave interference patterns. Desensitization factors ranging from 1 to 100 with respect to a Fizeau interferometer can be achieved. Harness checks of computer disks demonstrate the possibilities of both interferometers. Deformation measurements performed with the desensitized interferometer are presented.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pierre M. Jacquot and Pierre Michel Boone "Two holographic methods for flatness testing with subwavelength or multiple-wavelength sensitivities", Proc. SPIE 1212, Practical Holography IV, (1 May 1990); https://doi.org/10.1117/12.17983
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holograms

Holography

Interferometers

Holographic interferometry

Interferometry

Diffusers

Holographic interferometers

Back to Top