Poster + Paper
27 November 2023 Design and optimization of distributed feedback lasers with low relative intensity noise
Author Affiliations +
Conference Poster
Abstract
Distributed Feedback (DFB) semiconductor lasers with low Relative Intensity Noise (RIN) are in demand for high-power and narrow-linewidth applications. However, there is a lack of research on the compatibility of these features, together with RIN degradation at high temperature. In this paper, the RIN characteristics of InGaAsP multi-quantum-well DFB lasers are studied through theoretical calculation and numerical investigation, the results of which are very close. Based on numerical simulation, the epitaxy layers and optical cavity structures of DFB lasers are optimized to improve the RIN performance. The simulation results show that a high-power laser with an output power up to 400 mW and a narrow-linewidth laser with a linewidth below 300 kHz can obtain a peak RIN below -166 dB/Hz and -160 dB/Hz from 0.1 to 20 GHz, respectively, meeting the requirements of light sources for microwave photonics system and coherent optical transceiver system. In terms of thermal effect, buried heterostructure lasers could effectively mitigate the deterioration of RIN compared to ridge waveguide lasers due to better temperature characteristics.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Chen Lyu, Xuliang Zhou, Hongyan Yu, Mengqi Wang, Lei Yu, Yejing Zhang, and Jiaoqing Pan "Design and optimization of distributed feedback lasers with low relative intensity noise", Proc. SPIE 12761, Semiconductor Lasers and Applications XIII, 127610X (27 November 2023); https://doi.org/10.1117/12.2686691
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Relative intensity noise

Laser frequency

High power lasers

Coating

Design and modelling

Optical simulations

Numerical simulations

Back to Top