Evaluation of high-numerical-aperture wide-field steppers for 0.35-micron design rules

Barton A. Katz; James S. Greeneich; Richard Rogoff; Steve D. Slonaker; Stefan Wittekoek; Paul Frank Luehrmann Jr.; Martin A. van den Brink; Douglas R. Ritchie

doi:10.1117/12.130363

1 June 1992 Evaluation of high-numerical-aperture wide-field steppers for 0.35-micron design rules

Barton A. Katz, James S. Greeneich, Richard Rogoff, Steve D. Slonaker, Stefan Wittekoek, Paul Frank Luehrmann Jr., Martin A. van den Brink, Douglas R. Ritchie

Author Affiliations +

Proceedings Volume 1674, Optical/Laser Microlithography V; (1992) https://doi.org/10.1117/12.130363
Event: Microlithography '92, 1992, San Jose, CA, United States

Abstract

Many lithographic approaches to achieving 0.35 micron IC design rules have been proposed. Several years ago, the primary candidate was x-ray lithography. Today it is generally acknowledged that an optical approach will be used for such design rules. Both deep UV and i-line stepper technologies have progressed with capability to achieve 0.35pm design rules. High NA, wide-field lenses now exist for both deep UV and i-line [1], With the renewed interest in phase shift technology, i-line capability at 0.35pm design rules is comparable to deep UV technology. The development of a stepper architecture that allows both wide-field i-line and deep UV lenses to be accommodated in the same body and using thru-the-lens, direct-reticle-referenced alignment method [2] is reported. Common improvements in the areas of stage, die-by-die leveling and environmental control allow exceptional overlay performance to be achieved for both i-line and deep UV. The use of common architecture and the same alignment method facilitates the optimum mix and match combination of i-line and deep UV at 0. 35?m design rules Experimental investigation of stepper performance is reported in comparison to criteria established for design rules at 0.35pm. Overlay is evaluated on substrates typical of CMOS IC manufacturing. Lithographic performance is investigated using conventional techniques as well as more advanced techniques including phase shift reticles. Results indicate that overlay performance on tested substrates meets the requirements for 0.35?m design rules. Lithographic results indicate that 0.35pm lines/spaces are achievable using both conventional i-line and deep UV techniques, however, the implementation of phase shift reticles enhances the process latitudes for i-line at 0.35?m.

Citation Download Citation

Barton A. Katz, James S. Greeneich, Richard Rogoff, Steve D. Slonaker, Stefan Wittekoek, Paul Frank Luehrmann Jr., Martin A. van den Brink, and Douglas R. Ritchie "Evaluation of high-numerical-aperture wide-field steppers for 0.35-micron design rules", Proc. SPIE 1674, Optical/Laser Microlithography V, (1 June 1992); https://doi.org/10.1117/12.130363

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available