Paper
24 June 1993 Effects of absorber topography and multilayer coating defects on reflective masks for soft x-ray/EUV projection lithography
Author Affiliations +
Abstract
The effects of mask topography and multilayer coating defect on areal images of reflective masks for soft x-ray projection lithography is studied using electromagnetic simulation. Masks made by depositing and patterning an absorber layer over the multilayer coating was found to be insensitive to variations in incidence angle and absorber layer edge profile. 100 nm of gold, germanium or carbon absorber is sufficient for high image contrast. Masks made by etching patterns into the multilayer stack is more sensitive to variations in incidence angle and edge profile. Defects on the substrate severely degrade the areal image. Different coverage profiles results in widely different areal image.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Khanh B. Nguyen, Alfred K. K. Wong, Andrew R. Neureuther, and David T. Attwood Jr. "Effects of absorber topography and multilayer coating defects on reflective masks for soft x-ray/EUV projection lithography", Proc. SPIE 1924, Electron-Beam, X-Ray, and Ion-Beam Submicrometer Lithographies for Manufacturing III, (24 June 1993); https://doi.org/10.1117/12.146524
Lens.org Logo
CITATIONS
Cited by 13 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Multilayers

Reflectivity

Coating

Germanium

Gold

Carbon

Back to Top