Paper
17 May 1994 Aerial image analysis of quarter-micrometer patterns on a 0.5-NA excimer stepper
Ulrich C. Boettiger, Thomas Fischer, Andreas Grassmann, Holger Moritz
Author Affiliations +
Abstract
Applying a method for direct on stepper measurement of aerial images, the quarter micron performance of an advanced deep UV excimer stepper is analyzed. The aerial images are compared to corresponding simulation results as well as data obtained on an aerial image measurement system (AIMS). The study includes three different mask types: standard chrome on glass, an attenuated and an alternating phase shifting mask. Substrate effects as well as laser spectral purity effects have been measured. In general, the data show that simulation and AIMS data represent an upper limit for the aerial image contrast, which may be degraded significantly under real world imaging conditions. Use of a bottom anti reflective layer and a new laser with improved spectral bandwidth result in optimum aerial images close to those measured on AIMS, but they are still worse than simulation results. Some examples of quarter micron resist profiles and process windows in a deep UV resist are shown that were obtained under these optimized conditions with an excimer laser stepper.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich C. Boettiger, Thomas Fischer, Andreas Grassmann, and Holger Moritz "Aerial image analysis of quarter-micrometer patterns on a 0.5-NA excimer stepper", Proc. SPIE 2197, Optical/Laser Microlithography VII, (17 May 1994); https://doi.org/10.1117/12.175434
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Semiconducting wafers

Deep ultraviolet

Reflectivity

Image analysis

Excimers

Image processing

RELATED CONTENT

ANR photoresist process optimization at 248 nm
Proceedings of SPIE (June 01 1990)
Measuring line-edge roughness of masks with DUV light
Proceedings of SPIE (November 08 2005)
Patterning ULSI Circuits
Proceedings of SPIE (June 14 1996)
Evaluation of a deep UV bilayer resist for sub half...
Proceedings of SPIE (September 15 1993)

Back to Top