Paper
6 July 1994 Track association using correction for bias and missing data
Samuel S. Blackman, Nam D. Banh
Author Affiliations +
Abstract
One technique for multisensor tracking forms sensor level tracks using measurements received from the individual sensors. Then, the sensor level tracks are combined into a central level trackfile by performing multisensor track-to-track association and track fusion. Due to difference in sensor resolution, detection capability and coverage, there may be targets for which a track is formed by one sensor but not by the other. Also, tracks formed on the same target by multiple sensors may differ due to multisensor misalignment (or bias) error. This paper addresses these problems by developing a method to perform multisensor track-to-track association under the conditions of intersensor bias and missing track data. An augmentation to the association matrix is developed to account for the face that each sensor may not contain a full set of tracks for all targets in the field of view. An iterative approach is used to estimate and correct for the bias error. Monte Carlo simulation results are presented to illustrate the methods and close correspondence is found between these results and the theoretical probability of correct association.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Samuel S. Blackman and Nam D. Banh "Track association using correction for bias and missing data", Proc. SPIE 2235, Signal and Data Processing of Small Targets 1994, (6 July 1994); https://doi.org/10.1117/12.179077
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Error analysis

Monte Carlo methods

Detection and tracking algorithms

Optical resolution

Statistical analysis

Target detection

Back to Top