Paper
3 November 1994 Data preparation for CORE system in a MEBES environment
Ming-Huei Lin
Author Affiliations +
Abstract
Early in 1993 a CORE-2564 was installed in Taiwan Mask Corporation (TMC). This was in addition to the two existing MEBES-III systems. We have developed a data preparation system which we call `PRE-CORE' to integrate the CORE system into our existing MEBES-based environment. This PRE-CORE system consists of a high speed workstation and CATS software, supplied by Transcription Enterprises Limited. The system links CORE-2564 and the original data processing computer through the Ethernet network. The data files are converted by the PRE-CORE system into a simpler format for CORE to handle. The time spent in data preparation in the CORE system is significantly reduced, and therefore more time is available for plate-writing. Furthermore, due to this simpler data format, CORE can write masks in precise address units faster than was previously possible, regardless of whether or not the patterns are scaled. This helps produce high quality reticles while at the same time enhancing turn around time. However, in the first stage the TMC lithographic process bias remains the same for both MEBES and CORE plates. In this paper, the PRE-CORE data treatment methodology will be described. The benefits of using PRE-CORE will be compared to results achieved without the pre-processing of PRE-CORE.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ming-Huei Lin "Data preparation for CORE system in a MEBES environment", Proc. SPIE 2254, Photomask and X-Ray Mask Technology, (3 November 1994); https://doi.org/10.1117/12.191954
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

X-ray technology

X-rays

Computed tomography

Computer aided design

Data conversion

Critical dimension metrology

RELATED CONTENT

Novel defect inspection method for the LSI mask pattern data
Proceedings of SPIE (November 03 1994)
High-performance hierarchical fracturing
Proceedings of SPIE (August 01 2002)
Automation techniques for the handling of photomask data
Proceedings of SPIE (March 11 2002)
EMPOF: electronic mask production order forms
Proceedings of SPIE (December 17 2003)
Mask pattern correction for an advanced device
Proceedings of SPIE (July 19 2000)

Back to Top