Paper
7 October 1994 Stray light performance optimization through system design
Francis M. Reininger
Author Affiliations +
Abstract
The performance of an optical sensor is limited by one or more noise sources. To obtain the expected high sensitivity commensurate to recent technological advances, it is necessary to suppress the `noise' attributed to stray light. After defining stray light and addressing its impact on sensor performance, general principles for stray light optimization are presented from the system engineer's perspective. Data from stray light analyses performed on the optical monitor of the X-ray Multi-mirror Mission (XMM-OM) and the visible channel of the Cassini visible infrared mapping spectrometer (VIMS-V) provide a basis for a comparative study between the traditional Ritchey-Chretien telescope and a contemporary off-axis re- imager that is inherently stray light inviolable.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Francis M. Reininger "Stray light performance optimization through system design", Proc. SPIE 2260, Stray Radiation in Optical Systems III, (7 October 1994); https://doi.org/10.1117/12.189221
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Stray light

Sensors

Mirrors

Picosecond phenomena

Staring arrays

Telescopes

Saturn

RELATED CONTENT

Optical design and stray light analysis for the JANUS camera...
Proceedings of SPIE (September 23 2015)
SNAP Telescope
Proceedings of SPIE (December 18 2002)
Stray light analysis of the Lyman FUSE fine error sensor
Proceedings of SPIE (November 11 1996)
Stray Light Problems, Concepts, And Tools
Proceedings of SPIE (June 03 1987)
A Small-Angle Scatterometer
Proceedings of SPIE (April 05 1989)

Back to Top