Paper
22 April 1996 Mathematical model for the determination of the vertical displacement from internal horizontal measurements of a bridge
Samuel Vurpillot, Daniele Inaudi, Antonio Scano
Author Affiliations +
Abstract
The evolution of the vertical displacements is considered to be a good criterion to assess the condition of a bridge. Most embedded deformation sensors (e.g. inductive sensors, optical fiber sensor...) give the relative displacement between two points in the same structure. Therefore, the vertical displacements of a bridge in an earth-bound coordinate system are not directly supplied by the deformation sensors. This paper presents an algorithm to determine the vertical displacement from internal deformation measurements in the bridge. It is shown that 6n deformation sensors are necessary to draw the exact vertical displacement of a bridge uniformly loaded on n plus 1 supports. A load test has been carried out on a 6 m long timber beam on 3 supports, instrumented with 12 fiber optic deformation sensors. The vertical displacements calculated by the mathematical model on the base of the horizontal measurements are found to be in good agrement with the ones obtained by external dial gages.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Samuel Vurpillot, Daniele Inaudi, and Antonio Scano "Mathematical model for the determination of the vertical displacement from internal horizontal measurements of a bridge", Proc. SPIE 2719, Smart Structures and Materials 1996: Smart Systems for Bridges, Structures, and Highways, (22 April 1996); https://doi.org/10.1117/12.238852
Lens.org Logo
CITATIONS
Cited by 54 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Bridges

Fiber optics sensors

Mathematical modeling

Optical fibers

Fiber optics

Chemical analysis

Back to Top