Paper
11 December 1997 Thermal contact resistance across a copper-silicon interface
Ali M. Khounsary, David Chojnowski, Lahsen Assoufid, William M. Worek
Author Affiliations +
Abstract
An experimental setup to measure the thermal contact conductance across a silicon-copper (Si-Cu) interface is described, and the results obtained are presented. The resulting thermal contact resistance data are used in estimating the thermo-mechanical and optical performance of optical substrates cooled by interfaced copper cooling blocks. Several factors influence the heat transfer across solid interfaces. These include the material properties, interface pressure, flatness and roughness of the contacting surfaces, temperature, and interstitial material, if any. Results presented show the variation of thermal contact conductance as a function of applied interface pressure for a Cu-Si interface. Various interstitial materials investigated include indium foil, silver foil and a liquid eutectic (Ga-In-Sn). As expected, thermal contact resistance decreases as interface pressure increases, except in the case of the eutectic, in which it was nearly constant. The softer the interstitial material, the lower the thermal contact resistance. Liquid metal provides the lowest thermal contact resistance across the Cu-Si interface, followed by the indium foil, and then the silver foil.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ali M. Khounsary, David Chojnowski, Lahsen Assoufid, and William M. Worek "Thermal contact resistance across a copper-silicon interface", Proc. SPIE 3151, High Heat Flux and Synchrotron Radiation Beamlines, (11 December 1997); https://doi.org/10.1117/12.294497
Lens.org Logo
CITATIONS
Cited by 30 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interfaces

Resistance

Indium

Silicon

Copper

Temperature metrology

Liquids

Back to Top