Paper
12 September 2003 Localized temperature measurements while using a radio frequency total occlusion ablation system in a porcine model
John M. Neet, Marlin R. Siglinger R.N., Gail Palmer
Author Affiliations +
Abstract
A RF ablation guide wire with an optical coherence reflectometry guidance system has been developed to percutaneously open total occlusions in arteries. The ablation energy does generate heat as does any electrosurgical application of RF energy. Prior histology studies using this device had shown that the heat generated in the total occlusion was not a clinical concern. In this study, a novel fiber-optic based temperature measurement sensor was used to actually measure the temperature rise in an artery in vivo in a porcine model. The optical temperature measurement system is immune to RF emissions and interference and could be delivered in the same catheter as the guide wire. Temperature rises in the occluded arteries in a worst-case scenario were shown to be less than 10°C, localized to the volume adjacent to the ablation tip, and the temperature returned to ambient within a few seconds after the energy was no longer applied. The temperature data is in agreement with the prior histology studies.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John M. Neet, Marlin R. Siglinger R.N., and Gail Palmer "Localized temperature measurements while using a radio frequency total occlusion ablation system in a porcine model", Proc. SPIE 4949, Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems XIII, (12 September 2003); https://doi.org/10.1117/12.476273
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Arteries

Temperature metrology

Blood

Radio optics

Sensors

Coherence (optics)

Fiber optics

Back to Top