Paper
25 October 2004 Surface roughness estimation of shot-blasted steel bars using machine vision
Author Affiliations +
Abstract
During the manufacturing process steel bars are cleaned of roll scale by shot blasting, before further processing the bars by drawing. The main goal of this project is to increase the automation of the shot blasting process by machine vision. For this purpose a method is needed for estimating the surface roughness and other anomalies from the steel bars from digital images after the shot blasting. The goal of this method is to estimate if the quality of shot blasting is sufficient considering the quality of the final products after the drawing. In this project a method for normalising the images is considered and several methods for estimating the actual roughness level are experimented. During the experiments a best method was one where the roughness levels are calculated directly from the images as if the images were similar to other measuring sources and the grey-level values in the images represent the deviation on the bar surface. This at least separates the different samples.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sami Lyden, Heikki A. Kalviainen, and Jari Nykanen "Surface roughness estimation of shot-blasted steel bars using machine vision", Proc. SPIE 5608, Intelligent Robots and Computer Vision XXII: Algorithms, Techniques, and Active Vision, (25 October 2004); https://doi.org/10.1117/12.571435
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Surface roughness

Image processing

Image filtering

Machine vision

Gaussian filters

Visualization

Manufacturing

RELATED CONTENT

General-purpose localization of textured image regions
Proceedings of SPIE (May 19 1999)
FOVEA - A System for Invariant Visual Form Recognition
Proceedings of SPIE (June 09 1986)
Online defects localization on mirrorlike surfaces
Proceedings of SPIE (March 08 1999)
Inspecting wood surface roughness using computer vision
Proceedings of SPIE (January 06 1995)
Rendering high dynamic range images
Proceedings of SPIE (May 15 2000)

Back to Top