Paper
29 January 2007 Numerical simulation on surface deformation for rotating mirrors of ultra-high-speed photography
Hongbin Huang, Jingzhen Li, Xiangdong Gong, Fengshan Sun, Bin Hui
Author Affiliations +
Proceedings Volume 6279, 27th International Congress on High-Speed Photography and Photonics; 62797M (2007) https://doi.org/10.1117/12.725998
Event: 27th International congress on High-Speed Photography and Photonics, 2006, Xi'an, China
Abstract
The numerical analysis method for the surface deformation of rotating mirrors were presented based on the three-dimensional elastic mechanics and the computational techniques of finite element in this manuscript. With this method, the surface deformation curves of rotating mirrors including multi-surfaces from three to eight, aluminous, steel, and beryllium ones were calculated. A result was obtained that surface patterns of a mirror in operation are primarily dependent on the amount of surfaces and the axial hole which whether or not exists for aluminous and steel mirrors, but it rests with the amount of surfaces as well as Poisson's ratio for a beryllium mirror with so tiny Poisson's ratio. This conclusion is different from that of forerunner.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongbin Huang, Jingzhen Li, Xiangdong Gong, Fengshan Sun, and Bin Hui "Numerical simulation on surface deformation for rotating mirrors of ultra-high-speed photography", Proc. SPIE 6279, 27th International Congress on High-Speed Photography and Photonics, 62797M (29 January 2007); https://doi.org/10.1117/12.725998
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Beryllium

Photography

Numerical simulations

Finite element methods

Aluminum

Mechanics

Back to Top