Dependency of EUV mask defects on substrate defects

Sean Eichenlaub; Abbas Rastegar; Vivek Kapila; Yoshiaki Ikuta; Pat Marmillion

doi:10.1117/12.686437

20 October 2006 Dependency of EUV mask defects on substrate defects

Sean Eichenlaub, Abbas Rastegar, Vivek Kapila, Yoshiaki Ikuta, Pat Marmillion

Proceedings Volume 6349, Photomask Technology 2006; 63493C (2006) https://doi.org/10.1117/12.686437
Event: SPIE Photomask Technology, 2006, Monterey, California, United States

Abstract

Extreme ultraviolet (EUV) mask blanks must have nearly zero defects larger than 30 nm. Mask blank defects are an accumulation of defects present on the substrate, defects added during the multilayer (ML) deposition process, and defects added by handling the mask blank. A majority of the detectable defects are already present on the substrate before the ML deposition. However, very few of the defects present on the substrate before the ML deposition are detectable. This raises the question of whether the substrate's surface condition contributes to the total number of defects on the mask blank. Here the results of investigations on the relation between the total number of defects on the multilayer and the substrate surface condition are presented. The final surface condition is determined by the mask cleaning process. Correlation studies between defect maps before and after multilayer deposition are presented, and the relation between final defect size on the multilayer and substrate are discussed. SEMATECH's Mask Blank Development Center (MBDC) has a unique capability to characterize the surface of EUV glass substrates by atomic force microscopy (AFM), scanning electron microscopy (SEM), surface energy measurement, and zeta potential metrology. A series of experiments were performed in which different cleaning processes were used to modify the substrate surface condition before multilayer deposition. The effect of the cleaning process on the number of pits and particles after ML deposition was examined. The results indicate that although there is a direct relationship between the number of defects remaining on the substrate and mask blank defects after multilayer deposition, the variation in the total number of defects on the mask blank mainly corresponds to pits and particles already present on the substrate before cleaning and are not the result of the cleaning processes that were used before multilayer deposition.

Citation Download Citation

Sean Eichenlaub, Abbas Rastegar, Vivek Kapila, Yoshiaki Ikuta, and Pat Marmillion "Dependency of EUV mask defects on substrate defects", Proc. SPIE 6349, Photomask Technology 2006, 63493C (20 October 2006); https://doi.org/10.1117/12.686437

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available