Paper
11 January 2007 Acoustooptical pulsar processor: application of frequency scale calibration
Nelli A. Esepkina, Aleksandr P. Lavrov, Sergey A. Molodyakov, Vasiliy V. Oreshko
Author Affiliations +
Proceedings Volume 6594, Lasers for Measurements and Information Transfer 2006; 659411 (2007) https://doi.org/10.1117/12.725617
Event: Lasers for Measurements and Information Transfer 2006, 2006, St. Petersburg, Russian Federation
Abstract
The acoustooptical processor (AOP) is based on an acoustooptical spectrum analyzer with a CCD photodetector operating in a special pipeline operational mode (shift-and-add mode), which allows spectral components of the input signal to be added with a controlled time delay immediately in the CCD photodetector. The proposed AOP was successfully used on an RT-64 radio telescope (Kalyazin Radio Astronomy Observatory FIAN) for the observation of pulsars at 1.4 GHz in a bandwidth of 45 MHz. The frequency scale calibration allows increasing accuracy measurement of time of arrival radioemission pulsar. Experimental results of frequency scale calibration and pulsars profiles for a pulsar PSR 1937+21 are submitted.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nelli A. Esepkina, Aleksandr P. Lavrov, Sergey A. Molodyakov, and Vasiliy V. Oreshko "Acoustooptical pulsar processor: application of frequency scale calibration", Proc. SPIE 6594, Lasers for Measurements and Information Transfer 2006, 659411 (11 January 2007); https://doi.org/10.1117/12.725617
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

Calibration

Digital signal processing

Signal processing

Adaptive optics

Photodetectors

Control systems

Back to Top