Optimizing defect inspection strategy through the use of design-aware database control layers

Dvori Stoler; Wayne Ruch; Weimin Ma; Swapnajit Chakravarty; Steven Liu; Ray Morgan; John Valadez; Bill Moore; John Burns

doi:10.1117/12.747302

25 October 2007 Optimizing defect inspection strategy through the use of design-aware database control layers

Dvori Stoler, Wayne Ruch, Weimin Ma, Swapnajit Chakravarty, Steven Liu, Ray Morgan, John Valadez, Bill Moore, John Burns

Author Affiliations +

Proceedings Volume 6730, Photomask Technology 2007; 67303L (2007) https://doi.org/10.1117/12.747302
Event: SPIE Photomask Technology, 2007, Monterey, California, United States

Abstract

Resolution limitations in the mask making process can cause differences between the features that appear in a database and those printed to a reticle. These differences may result from intentional or unintentional features in the database exceeding the resolution limit of the mask making process such as small gaps or lines in the data, line end shortening on small sub-resolution assist features etc creating challenges to both mask writing and mask inspection. Areas with high variance from design to mask, often referred to as high MEEF areas (mask error enhancement factor), become highly problematic and can directly impact mask and device yield, mask manufacturing cycle time and ultimately mask costs. Specific to mask inspection it may be desirable to inspect certain non-critical or non-relevant features at reduced sensitivity so as not to detect real, but less significant process defects. In contrast there may also be times where increased sensitivity is required for critical mask features or areas. Until recently, this process was extremely manual, creating added time and cost to the mask inspection cycle. Shifting to more intelligent and automated inspection flows is the key focus of this paper. A novel approach to importing design data directly into the mask inspection to include both MDP generated MRC errors files and LRC generated MEEF files. The results of recently developed inspection and review capability based upon controlling defect inspection using design aware data base control layers on a pixel basis are discussed. Typical mask shop applications and implementations will be shown.

Citation Download Citation

Dvori Stoler, Wayne Ruch, Weimin Ma, Swapnajit Chakravarty, Steven Liu, Ray Morgan, John Valadez, Bill Moore, and John Burns "Optimizing defect inspection strategy through the use of design-aware database control layers", Proc. SPIE 6730, Photomask Technology 2007, 67303L (25 October 2007); https://doi.org/10.1117/12.747302

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available