Paper
16 April 2008 Transverse mode analysis of a laser beam with a non-optical technique
R. de Saint Denis, M. Fromager, F. Porée, K. Ait-Ameur
Author Affiliations +
Abstract
Quality evaluation of a laser beam is a subject of interest to both designers and users of lasers. A well known method is to measure the M2 second-moment from the longitudinal evolution of beam width determined from intensity profile monitored by a CCD camera. This standard procedure is time consuming, and costly. It is therefore difficult to be implemented for checking, for instance, each VCSEL diode moving out of the assembly line of a high volume production factory. In this paper, we propose an alternative fast method allowing to separate single transverse mode from multiple transverse modes oscillation. This method is based on an electronic analysis (locking amplifier) of the local slope of the output laser characteristic, i.e. laser output power versus pumping intensity. The only optoelectronics component used is a cheap photodiode with a large sensitive area (active diameter 5mm) for measuring the laser output power. Correlation between M2 and local slope variations, as the pumping intensity is increased, has been experimentally demonstrated with different lasers : Nd:YVO4 and VCSEL.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. de Saint Denis, M. Fromager, F. Porée, and K. Ait-Ameur "Transverse mode analysis of a laser beam with a non-optical technique", Proc. SPIE 6998, Solid State Lasers and Amplifiers III, 69980N (16 April 2008); https://doi.org/10.1117/12.780271
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Neodymium

Amplifiers

CCD cameras

Modulation

Photodiodes

Vertical cavity surface emitting lasers

Back to Top