Paper
24 February 2009 Fabrication of surface plasmon resonators by nanoskiving single-crystalline gold microplates
Benjamin J. Wiley, Darren J. Lipomi, Jiming Bao, Federico Capasso, George M. Whitesides
Author Affiliations +
Abstract
This paper demonstrates the sectioning of chemically synthesized, single-crystalline microplates of gold with an ultramicrotome to produce single-crystalline nanowires. This method produces collinearly aligned nanostructures with small, regular changes in dimension with each consecutive cross-section. The diamond knife cuts cleanly through microplates 100 nm thick without bending the resulting nanowire, and cuts through the sharp edges of a crystal to generate nanoscale tips. This paper demonstrates that the smooth surface of the single-crystalline gold nanowires allows them to guide plasmons with lower loss than rough, polycrystalline nanowires, and that the sharp tips on the singlecrystalline nanowires serve as optical antenna that selectively couple light into the nanowire at the resonance frequency of the sharp tip.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Benjamin J. Wiley, Darren J. Lipomi, Jiming Bao, Federico Capasso, and George M. Whitesides "Fabrication of surface plasmon resonators by nanoskiving single-crystalline gold microplates", Proc. SPIE 7205, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics II, 72050Q (24 February 2009); https://doi.org/10.1117/12.807813
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nanowires

Gold

Epoxies

Resonators

Surface plasmons

Plasmons

Scanning electron microscopy

Back to Top