Paper
21 July 2010 Testing and alignment of the LBTI
Jihun Kim, Philip Hinz, Olivier Durney, Tom Connors, Manny Montoya, Christian Schwab
Author Affiliations +
Abstract
The Large Binocular Telescope Interferometer (LBTI) has been developed and tested and is almost ready to be installed to LBT mount. In preparation for installation, testing of the beam combination and phasing of the system have been developed. The testing is currently in progress. The development of a telescope simulator for LBTI has allowed verification of phasing and alignment with a broad band source at 10 microns2. Vibration tests with the LBTI mounted to the LBT were carried out in July 2008, with both seismic accelerometers and an internal optical interferometric measurement. The results have allowed identification of potential vibration sources on the telescope. Plans for a Star Simulator that illuminates each LBT aperture at the prime focus with two artificial point sources derived from a single point source via fiber optics are presented. The Star Simulator will allow testing of LBTI with the telescope and the adaptive secondaries in particular. Testing with the Star Simulator will allow system level testing of LBTI on the telescope, without need to use on-sky time. Testing of the Star Simulator components are presented to verify readiness for use with the LBTI.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jihun Kim, Philip Hinz, Olivier Durney, Tom Connors, Manny Montoya, and Christian Schwab "Testing and alignment of the LBTI", Proc. SPIE 7734, Optical and Infrared Interferometry II, 77341W (21 July 2010); https://doi.org/10.1117/12.857342
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Stars

Device simulation

Telescopes

Fiber couplers

Chromatic aberrations

Glasses

Lens design

RELATED CONTENT

Binary optics from a ray-tracing point of view
Proceedings of SPIE (January 01 1991)
OAST: a testbed for cophasing instrumentation
Proceedings of SPIE (June 01 1994)
IODC98 optical design problem method of progressing from an...
Proceedings of SPIE (September 21 1998)
Recent Trends in the Design of Microscope Objectives
Proceedings of SPIE (February 14 1986)
Multiple-beam combination for faint objects
Proceedings of SPIE (October 20 2004)
Possible control and testing of concave telescope mirrors
Proceedings of SPIE (September 18 1997)

Back to Top