Paper
9 November 2010 Design of a testing compensator for F/3 hyperbolic mirror
Yinghua Yuan, Jianjun Hu, Junhua Pan
Author Affiliations +
Abstract
The design principles of three familiar compensators are introduced. They are null lens compensator, offner compensator and reflective mirror compensator. Base on the three different theories, three different kinds of compensators for the testing of F/3 hyperbolic mirror are designed. The initial parameters of every compensator are analyzed in detail. The residual wavefront error, RMS radius of the spot diagrams and the tolerance of the three compensators are presented respectively. Due to the residual wavefront error consisted in these compensators themselves, higher order aspheric terms will be introduced into the hyperbolic mirror when using these compensators to test the mirror during the process of the fabrication. These higher order aspheric terms will influence the image quality of R-C system which primary mirror is this hyperbolic mirror. The simulation of this influence is analyzed in this paper. The residual wavefront error of the three final designs are all less than λ/30. The RMS radii of the spot diagrams are all less than 0.48μm.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yinghua Yuan, Jianjun Hu, and Junhua Pan "Design of a testing compensator for F/3 hyperbolic mirror", Proc. SPIE 7849, Optical Design and Testing IV, 78491T (9 November 2010); https://doi.org/10.1117/12.869700
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Tolerancing

Aspheric lenses

Reflectivity

Wavefronts

Image quality

Manufacturing

Back to Top