Paper
20 April 2011 A CD-gap-free contour extraction technique for OPC model calibration
T. Shibahara, T. Minakawa, M. Oikawa, H. Shindo, H. Sugahara, Y. Hojyo
Author Affiliations +
Abstract
Recently, optical proximity correction model calibration techniques that use SEM contours have enabled possibly significant improvements in complex mask design. However, compared to conventional CD-based calibration, contour-based calibration results in increased errors in 1D features. In fact, our research shows that there is a ~1-nm gap, which we call "CD-gap," between CD measurements directly calculated from a SEM image and CD measurements calculated from SEM contours. To achieve accurate calibration, SEM contours must match the corresponding CD measurements. We have developed a CD-gap-free contour extraction technique in response to this problem. In our technique, a mask edge is classified into shape structures and an optimized SEM contour extraction method is prepared for each shape structure to reduce the CD-gap. Experimental results show that the CD-gap can be decreased to sub-nm, which clearly demonstrates the potential of our proposed technique to play a vital role in the lithography process.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Shibahara, T. Minakawa, M. Oikawa, H. Shindo, H. Sugahara, and Y. Hojyo "A CD-gap-free contour extraction technique for OPC model calibration", Proc. SPIE 7971, Metrology, Inspection, and Process Control for Microlithography XXV, 79710O (20 April 2011); https://doi.org/10.1117/12.878583
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scanning electron microscopy

Optical proximity correction

Calibration

Photomasks

Critical dimension metrology

Image processing

Lithography

Back to Top