Paper
18 December 2012 Planar plano-convex microlens in silica using ICP-CVD and DRIE
Author Affiliations +
Abstract
A microlens suitable for integration with photonic elements on the same substrate is presented. It is fabricated utilizing planar standard technologies such as UV lithography, ICP-CVD and Deep Reactive Ion Etching. For reaching an optical 3D functionality with 2 D structuring methods a variation of the refractive index during the layer deposition process in the vertical direction is used. For the horizontal direction, parallel to the substrate, the shape of etched side walls determines the focus. This procedure allows the independent control of light propagation in two perpendicular directions with planar technologies. To demonstrate the potential of the technology, optical elements for the collimation of fiber-based light sources are presented.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. Markweg, M. Hillenbrand, S. Sinzinger, and M. Hoffmann "Planar plano-convex microlens in silica using ICP-CVD and DRIE", Proc. SPIE 8550, Optical Systems Design 2012, 85500T (18 December 2012); https://doi.org/10.1117/12.981266
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

Collimation

GRIN lenses

Microlens

Silicon

Beam shaping

Deep reactive ion etching

RELATED CONTENT

High-Q GRIN resonators
Proceedings of SPIE (April 22 2016)
Beam transformations by active GRIN materials
Proceedings of SPIE (July 26 2011)
Integration of microlens with planar lightwave circuit
Proceedings of SPIE (March 11 2005)

Back to Top