Paper
30 August 2013 Tolerance analysis of multispectral camera optical system
Author Affiliations +
Proceedings Volume 8910, International Symposium on Photoelectronic Detection and Imaging 2013: Imaging Spectrometer Technologies and Applications; 89101O (2013) https://doi.org/10.1117/12.2034678
Event: ISPDI 2013 - Fifth International Symposium on Photoelectronic Detection and Imaging, 2013, Beijing, China
Abstract
There is a vast range of prospects on remote sensing, land mapping, resources survey, natural disaster monitoring by using multispectral camera. It is useful for improving national economic development and realizing numerical earth. Optical tolerance is a critical step in the optical design process. Sensitivity analysis and inverse sensitivity analysis are used to compute the effect, which reduce the optical system performance by the each tolerance parameter. Suitable tolerating requirements and compensators may be defined to model allowable adjustments after fabrication. The optical system with high image quality and low distortion is produced according to the tolerance requirements. The tested result shows the MTF of multi-spectral can reach to 0.243 at Nyquist frequency; the tolerance analysis methods are correct and feasible.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hong Wang "Tolerance analysis of multispectral camera optical system", Proc. SPIE 8910, International Symposium on Photoelectronic Detection and Imaging 2013: Imaging Spectrometer Technologies and Applications, 89101O (30 August 2013); https://doi.org/10.1117/12.2034678
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tolerancing

Modulation transfer functions

Cameras

Mirrors

Optical design

Imaging systems

Optical alignment

Back to Top