Surface transmission enhancement of ZnS via continuous-wave laser microstructuring

Kevin J. Major; Catalin M. Florea; Menelaos K. Poutous; Lynda E. Busse; Jasbinder S. Sanghera; Ishwar D. Aggarwal

doi:10.1117/12.2036790

6 March 2014 Surface transmission enhancement of ZnS via continuous-wave laser microstructuring

Kevin J. Major, Catalin M. Florea, Menelaos K. Poutous, Lynda E. Busse, Jasbinder S. Sanghera, Ishwar D. Aggarwal

Author Affiliations +

Proceedings Volume 8968, Laser-based Micro- and Nanoprocessing VIII; 896810 (2014) https://doi.org/10.1117/12.2036790
Event: SPIE LASE, 2014, San Francisco, California, United States

Abstract

Fresnel reflectivity at dielectric boundaries between optical components, lenses, and windows is a major issue for the optics community. The most common method to reduce the index mismatch and subsequent surface reflection is to apply a thin film or films of intermediate indices to the optical materials. More recently, surface texturing or roughening has been shown to approximate a stepwise refractive index thin-film structure, with a gradient index of refraction transition from the bulk material to the surrounding medium. Short-pulse laser ablation is a recently-utilized method to produce such random anti-reflective structured surfaces (rARSS). Typically, high-energy femtosecond pulsed lasers are focused on the surface of the desired optical material to produce periodic or quasi-periodic assemblies of nanostructures which provide reduced surface reflection. This technique is being explored to generate a variety of structures across multiple optical materials. However, femtosecond laser systems are relatively expensive and more difficult to maintain. We present here a low power and low-cost alternative to femtosecond laser ablation, demonstrating random antireflective structures on the surface of Cleartran ZnS windows produced with a continuous-wave laser. In particular, we find that irradiation with a low-powered (<10 mW), defocused, CW 325nm-wavelength laser produces a random surface with significant roughness on ZnS substrates. The transmission through the structured ZnS windows is shown to increase by up to 9% across a broad wavelength range from the visible to the near-infrared.

Citation Download Citation

Kevin J. Major, Catalin M. Florea, Menelaos K. Poutous, Lynda E. Busse, Jasbinder S. Sanghera, and Ishwar D. Aggarwal "Surface transmission enhancement of ZnS via continuous-wave laser microstructuring", Proc. SPIE 8968, Laser-based Micro- and Nanoprocessing VIII, 896810 (6 March 2014); https://doi.org/10.1117/12.2036790

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE