Quantitative model of the effects of contamination and space environment on in-flight aging of thermal coatings

Emilie Vanhove; Jean-François Roussel; Stéphanie Remaury; Delphine Faye; Pascale Guigue

doi:10.1117/12.2061029

9 September 2014 Quantitative model of the effects of contamination and space environment on in-flight aging of thermal coatings

Emilie Vanhove, Jean-François Roussel, Stéphanie Remaury, Delphine Faye, Pascale Guigue

Author Affiliations +

Proceedings Volume 9196, Systems Contamination: Prediction, Measurement, and Control 2014; 91960B (2014) https://doi.org/10.1117/12.2061029
Event: SPIE Optical Engineering + Applications, 2014, San Diego, California, United States

Abstract

The in-orbit aging of thermo-optical properties of thermal coatings critically impacts both spacecraft thermal balance and heating power consumption. Nevertheless, in-flight thermal coating aging is generally larger than the one measured on ground and the current knowledge does not allow making reliable predictions¹. As a result, a large oversizing of thermal control systems is required. To address this issue, the Centre National d’Etudes Spatiales has developed a low-cost experiment, called THERME, which enables to monitor the in-flight time-evolution of the solar absorptivity of a large variety of coatings, including commonly used coatings and new materials by measuring their temperature. This experiment has been carried out on sunsynchronous spacecrafts for more than 27 years, allowing thus the generation of a very large set of telemetry measurements. The aim of this work was to develop a model able to semi-quantitatively reproduce these data with a restraint number of parameters. The underlying objectives were to better understand the contribution of the different involved phenomena and, later on, to predict the thermal coating aging at end of life. The physical processes modeled include contamination deposition, UV aging of both contamination layers and intrinsic material and atomic oxygen erosion. Efforts were particularly focused on the satellite leading wall as this face is exposed to the highest variations in environmental conditions during the solar cycle. The non-monotonous time-evolution of the solar absorptivity of thermal coatings is shown to be due to a succession of contamination and contaminant erosion by atomic oxygen phased with the solar cycle.

Citation Download Citation

Emilie Vanhove, Jean-François Roussel, Stéphanie Remaury, Delphine Faye, and Pascale Guigue "Quantitative model of the effects of contamination and space environment on in-flight aging of thermal coatings", Proc. SPIE 9196, Systems Contamination: Prediction, Measurement, and Control 2014, 91960B (9 September 2014); https://doi.org/10.1117/12.2061029

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available