Impact of materials selection on graphoepitaxial directed self-assembly for line-space patterning

Dung Quach; Valeriy V. Ginzburg; Mingqi Li; Janet Wu; Shih-wei Chang; Peter Trefonas III; Phillip D. Hustad; Dan B. Millward; Gurpreet S. Lugani; Scott L. Light

doi:10.1117/12.2085807

27 March 2015 Impact of materials selection on graphoepitaxial directed self-assembly for line-space patterning

Dung Quach, Valeriy V. Ginzburg, Mingqi Li, Janet Wu, Shih-wei Chang, Peter Trefonas III, Phillip D. Hustad, Dan B. Millward, Gurpreet S. Lugani, Scott L. Light

Author Affiliations +

Proceedings Volume 9423, Alternative Lithographic Technologies VII; 94230N (2015) https://doi.org/10.1117/12.2085807
Event: SPIE Advanced Lithography, 2015, San Jose, California, United States

Abstract

Directed self-assembly (DSA) of block copolymers (BCPs) is a promising technology for advanced patterning at future technology nodes, but significant hurdles remain for commercial implementation. While chemoepitaxy processes employing poly(styrene-block-methyl methacrylate) (PS-PMMA) are most widely studied for DSA line/space patterning, graphoepitaxy processes using more strongly segregated “high-X;” block copolymers have recently shown a lot of promise, with lower defectivity and line-width roughness (LWR) than comparative chemoepitaxy processes. This paper reports on some of the design considerations for optimizing line/space patterning with these materials. We have found that brush and block copolymer selection are critical to achieve high quality DSA. For example, brush thickness must be optimized to achieve matching space critical dimensions, and brush surface energy impacts kinetics of assembly. The X parameter of the block copolymer should be optimized to balance LWR, kinetics of assembly, and process window. Glass transition temperature (T_g) of the blocks showed little impact on performance. Overall, parameters of both BCP and brush must be simultaneously optimized to achieve high quality DSA.

Citation Download Citation

Dung Quach, Valeriy V. Ginzburg, Mingqi Li, Janet Wu, Shih-wei Chang, Peter Trefonas III, Phillip D. Hustad, Dan B. Millward, Gurpreet S. Lugani, and Scott L. Light "Impact of materials selection on graphoepitaxial directed self-assembly for line-space patterning", Proc. SPIE 9423, Alternative Lithographic Technologies VII, 94230N (27 March 2015); https://doi.org/10.1117/12.2085807

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE