Paper
11 July 2016 Development of manufacture of mirror glass substrate for x-ray timing and polarization observatory
Zhenbo Wei, Bing Ge, Xin Jin, Na Liu, Yingyu Liao, Bin Ma, Yuhong Bai, Zhanshan Wang
Author Affiliations +
Abstract
In China, X-ray timing and polarization (XTP) observatory will have a collection area of 9,000 cm2 at 2~6 keV. The observatory consists of five identical hard X-ray telescopes and ten identical soft X-ray telescopes. The angular resolution is about 1 arcminute of HPD (half-power diameter). Each telescope consists of a large number of mirror segments precisely assembled together. Our development of the mirror glass substrate is presented in this manuscript. These substrates are produced by slumping commercially available thin glass sheets. Here, we report on our work of manufacturing these substrates. The optimization of the slumping procedure is described and optimal procedure parameters are reported. The figure error of slumped glass substrates was measured by a laser scanner and an interferometer with CGH. The measurement demonstrated that the figure error is lower enough for the construction of XTP telescopes.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhenbo Wei, Bing Ge, Xin Jin, Na Liu, Yingyu Liao, Bin Ma, Yuhong Bai, and Zhanshan Wang "Development of manufacture of mirror glass substrate for x-ray timing and polarization observatory", Proc. SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 99057E (11 July 2016); https://doi.org/10.1117/12.2232214
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Mirrors

X-ray telescopes

X-rays

Interferometers

Laser scanners

Space telescopes

RELATED CONTENT


Back to Top