Deformations in wide, center-notched, thin panels, part II: finite element analysis and comparison to experimental measurements

Jeffrey D. Helm; Michael A. Sutton; Stephen R. McNeill

doi:10.1117/1.1566002

1 May 2003 Deformations in wide, center-notched, thin panels, part II: finite element analysis and comparison to experimental measurements

Jeffrey D. Helm, Michael A. Sutton, Stephen R. McNeill

Author Affiliations +

Optical Engineering, Vol. 42, Issue 5, (May 2003). https://doi.org/10.1117/1.1566002

Finite element analyses, for comparison with the experimental measurements, were performed for each panel described in Part I. Results indicate that (a) for the 305- and 610-mm panels, the finite element predictions and global experimental measurements for two of the displacement components, U(x, y, 0.80 mm) and W(x, y, 0.80 mm), are in good agreement throughout the panel, (b) for the 305- and 610-mm panels, the finite element predictions for the vertical displacement field V(x, y, 0.80 mm) are ~5% lower than the measurements throughout the panel, (c) for the 1016-mm panel, the finite element predictions did not match the experimental measurements due to the specimen slipping in the grip fixtures, as shown in the full-field measurements, resulting in significant changes in the measured panel deformations, and (d) for all three panels, the local finite element predictions for the in-plane strain components, ∈_xx, ∈_xy, and ∈_yy, including the overall trends in both the size and shape of the large strain regions, are in quantitative agreement with experimental results. In summary, results indicate that an appropriate finite element method, capable of predicting the deformations observed in the structures to be modeled, will be effective in modeling the overall behavior of wide, flawed panels up to the onset of flaw growth. Furthermore, the combination of finite element analysis and three-dimensional measurements for accurate prediction of displacement boundary conditions is shown to be a viable hybrid approach for predicting flawed panel response.

©(2003) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Jeffrey D. Helm, Michael A. Sutton, and Stephen R. McNeill "Deformations in wide, center-notched, thin panels, part II: finite element analysis and comparison to experimental measurements," Optical Engineering 42(5), (1 May 2003). https://doi.org/10.1117/1.1566002

Published: 1 May 2003

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE