We present a new design of high sensitivity, multi-spectral capability AlGaAsSb/InGaAsSb phototransistors for infrared
sensing and solar energy conversion applications. These devices are grown by molecular beam epitaxy (MBE), which
exhibit high responsivity at room-temperature. The 50% cutoff wavelength of spectral photoresponse is 2.2 μm. Similar
structures are also investigated for solar cell applications. The possibility of increasing the solar energy conversion is
explored by incorporating nano-antenna array into the solar cell. The broad-band nano-antenna is designed using Ansoft
HFSS. The results indicate high solar energy conversion can be achieved for highly efficiency, flexible, lightweight solar
power generations for the applications such as aircraft, airbase and special operations.
We demonstrate nondefect mid-infrared waveguides based on the self-collimation effect in photonic crystals (PhCs). Due to the spatial dispersion properties serving to confine and route light, propagation loss as low as 2.56 dB/mm is obtained in a silicon-on-insulator (SOI)-based waveguide. The efficiency, together with their ability of arbitrary and structureless routing of electromagnetic beams, of these self-collimation devices provide a potential candidate for miniaturizing devices.
We demonstrate an efficient prism coupling method to couple nonplanar infrared waves into a 2-D planar photonic-crystal (PhC) device, such as a PhC waveguide (PhCW). A coupling efficiency of 31.1% is obtained experimentally. Results from finite-difference time-domain (FDTD) modeling are shown to closely match the results measured in a fabricated sample.
In this paper, we demonstrate the design and fabrication of a planar lens based on the dispersion property of a photonic crystal. When a photonic crystal is illuminated with a low frequency within its dispersion diagram it behaves very similar to an isotropic material, whose resultant index is kept a constant, and is determined by the ratio of high index material and low index material. To validate our design, we performed the experiment in millimeter regime, where the photonic crystal lens was fabricated using a CNC micro-milling machine, and a millimeter wave imaging system was built based on a vector network analyzer. For the lens, we have observed its ability to collimate an incident point source both in the amplitude and phase.
Using the special dispersion properties of photonic crystals (PhCs), we present a promising novel coupling device, the terahertz (THz) planar photonic crystal (PhC) lens. Three-dimensional finite-difference time-domain (3D-FDTD) calculations show a 90% power transfer from a 100 mm waveguide to a 10 mm waveguide, and experimental results confirm its high efficiency. Furthermore, the PhC lens couples the wave into a PhC line-defect waveguide is also reported. These achievements manifest the usefulness of the PhC lens as an effective approach to couple the wave into future THz circuits.
We present a method for coupling from a single mode fiber, or fiber ribbon, into an SOI waveguide for integration with silicon opto-electronic circuits. The coupler incorporates the advantages of the tapered waveguides and prism couplers, yet offers the flexibility of planar integration. The coupler can be fabricated on a double polished silicon wafer using direct polishing or grayscale photolithography. Tapered waveguides or J-couplers are then used as lateral mode converters. An experimental setup with a rotational stage and a pneumatic plunger has been built for adjusting the incident angle and tunnel layer thickness, which are key factors in determining the coupling efficiency. When optimal coupling is achieved on the setup, the coupler can be packaged using epoxy bonding. Thus, a fiber-waveguide parallel coupler or connector can be easily constructed. Electromagnetic calculation predicts a coupling efficiency of 77%(-1.14dB insertion loss) for a silicon-to-silicon coupler with a uniform tunnel layer. The coupling efficiency is experimentally achieved to be 46%(-3.4dB insertion loss) excluding the loss in silicon and the reflections from the input surface and output facet.
A terahertz-scale two-dimensional photonic-crystal waveguide based on a silicon-on-insulator was fabricated, and the optical transmission spectrum was measured. Terahertz beam propagation characteristics were observed using a thermal imaging camera, with incident light in the 10.1-10.7μm range. The measured transmission spectrum was in very good agreement with a three-dimensional finite-difference time-domain calculation.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.