We present the photometric performance of SPIRIT, a ground-based near-infrared InGaAs CMOS-based instrument (1280 by 1024 pixels, 12 μm pitch), using on-sky results from the SPECULOOS-Southern Observatory during 2022 – 2023. SPIRIT was specifically designed to optimise time-series photometric precision for observing late M and L type stars. To achieve this, a custom wide-pass filter (0.81 – 1.33 μm, zYJ ) was used, which was also designed to minimise the effects of atmospheric precipitable water vapour (PWV) variability on differential photometry. Additionally, SPIRIT was designed to be maintenance-free by eliminating the need for liquid nitrogen for cooling. We compared SPIRIT’s performance with a deeply-depleted (2048 by 2048 pixels, 13.5 μm pitch) CCD-based instrument (using an I+z’ filter, 0.7 – 1.1 μm) through simultaneous observations. For L type stars and cooler, SPIRIT exhibited better photometric noise performance compared to the CCD-based instrument. The custom filter also significantly minimised red noise in the observed light curves typically introduced by atmospheric PWV variability. In SPIRIT observations, the detector’s read noise was the dominant limitation, although in some cases, we were limited by the lack of comparison stars.
Planet Formation research is blooming in an era where we are moving from speaking about “protoplanetary disks” to “planet forming disks” (1). However, this transition is still motivated by indirect (but convincing) hints. Up to date, the direct detection of planets “in the making” remains elusive with the remarkable exception of PDS 70 b and c (2; 3; 4). The scarcity of detections is attributable to technical challenges, and even for the rare jewels that we can detect, characterization is unachievable. The next step in this direction demands from near to mid-infrared interferometry to jump from ∼100 m baselines to ∼1 km, and from very few telescopes to 20 or more (PFI like concepts, (5)). This transition needs for more affordable near to mid-infrared telescopes to be designed. Since the driving cost for such telescopes resides on the primary mirror, in particular scaling with its diameter and weight, our approach to tackle this problem relies on the production of low-cost light mirrors
The surface quality of replicated CFRP mirrors is ideally expected to be as good as the mandrel from which they are manufactured. In practice, a number of factors produce surface imperfections in the final mirrors at different scales. To understand where this errors come from, and develop improvements to the manufacturing process accordingly, a wide range of metrology techniques and quality control methods must be adopted. Mechanical and optical instruments are employed to characterise glass mandrels and CFRP replicas at different spatial frequency ranges. Modal analysis is used to identify large scale aberrations, complemented with a spectral analysis at medium and small scales. It is seen that astigmatism is the dominant aberration in the CFRP replicas. On the medium and small scales, we have observed that fiber print-through and surface roughness can be improved significantly by an extra resin layer over the replica's surface, but still some residual irregularities are present.
The Planet Formation Imager (PFI) is a near- and mid-infrared interferometer project with the driving science goal of imaging directly the key stages of planet formation, including the young proto-planets themselves. Here, we will present an update on the work of the Science Working Group (SWG), including new simulations of dust structures during the assembly phase of planet formation and quantitative detection efficiencies for accreting and non-accreting young exoplanets as a function of mass and age. We use these results to motivate two reference PFI designs consisting of a) twelve 3m telescopes with a maximum baseline of 1.2km focused on young exoplanet imaging and b) twelve 8m telescopes optimized for a wider range of young exoplanets and protoplanetary disk imaging out to the 150K H2O ice line. Armed with 4 x 8m telescopes, the ESO/VLTI can already detect young exoplanets in principle and projects such as MATISSE, Hi-5 and Heimdallr are important PFI pathfinders to make this possible. We also discuss the state of technology development needed to make PFI more affordable, including progress towards new designs for inexpensive, small field-of-view, large aperture telescopes and prospects for Cubesat-based space interferometry.
In 2015 the Institute of Physics and Astronomy of the Universidad de Valparaiso in Chile received as a donation the Bochum 0.61-meter telescope. Here we preset the ongoing project to convert this senior member of La Silla Observatory to modern standards aiming at performing state-of-art science, as well as teaching and outreach. Firstly, the site characterization was performed in order to verify the observing conditions. The preliminary results were auspicious in relation to the nights available for observation. In early 2016 began the transfer work form La Silla Observatory to the new site of operations. The actual status of the telescope was analyzed and an upgrade plan was proposed to make it usable remotely using a web-based telescope control system developed in Chile by ObsTech SpA. Future upgrade and scientific collaboration will be discussed based on the site characterization and technical studies regarding the potential for new instrumentation.
In the era of high-angular resolution astronomical instrumentation, where long and very long baseline interferometers (constituted by many, ∼20 or more, telescopes) are expected to work not only in the millimeter and submillimeter domain, but also at near and mid infrared wavelengths (experiments such as the Planet Formation Imager, PFI, see Monnier et al. 2018 for an update on its design); any promising strategy to alleviate the costs of the individual telescopes involved needs to be explored. In a recent collaboration between engineers, experimental physicists and astronomers in Valparaiso, Chile, we are gaining expertise in the production of light carbon fiber polymer reinforced mirrors. The working principle consists in replicating a glass, or other substrate, mandrel surface with the mirrored adequate curvature, surface characteristics and general shape. Once the carbon fiber base has hardened, previous studies have shown that it can be coated (aluminum) using standard coating processes/techniques designed for glass-based mirrors. The resulting surface quality is highly dependent on the temperature and humidity control among other variables. Current efforts are focused on improving the smoothness of the resulting surfaces to meet near/mid infrared specifications, overcoming, among others, possible deteriorations derived from the replication process. In a second step, at the validation and quality control stage, the mirrors are characterized using simple/traditional tools like spherometers (down to micron precision), but also an optical bench with a Shack-Hartman wavefront sensor. This research line is developed in parallel with a more classical glass-based approach, and in both cases we are prototyping at the small scale of few tens of cms. We here present our progress on these two approaches.
KEYWORDS: Adaptive optics, Control systems, Sensors, Telescopes, Adaptive optics, Control systems, Fluctuations and noise, Turbulence, Charge-coupled devices, Device simulation, Signal processing, Data modeling
The Magellan Telescope Adaptive Optics System (MagAO) is subject to resonance effects induced by elements within the system instrumentation, such as fans and cooling pumps. Normalized PSDs are obtained through frequency-based analysis of closed-loop on-sky data, detecting and measuring vibration effects. Subsequently, a space-state model for the AO loop is obtained, using a standard AO loop scheme with an integrator-based controller and including the vibration effects as disturbances. Finally, a new control alternative is proposed, focusing on residual phase variance minimization through the design and simulation of an optimal LQG control approach.
Mechanical vibrations affect the performance in modern adaptive optics systems. These structural vibrations induce aberration mainly in tip-tilt modes that reduce the accuracy of the astronomical instrument. Therefore, control actions need to be taken. With this purpose we present a laboratory demonstration of vibration rejection of tip-tilt modes using closed-loop control, inducing vibration on the test bench via an eccentric motor with controllable frequency, in order to simulate the structural vibrations mentioned above. We measure the laser vibration and its tip-tilt aberration using a camera and a Shack Hartmann Wave Front Sensor. The control action is carried out by a Fast Steering Mirror (FSM).
The adaptive optics system performance depends on multiple factors, including the quality of the laser beam before being projected to the mesosphere. Cumbersome procedures are required in the laser system to optimize the laser beam in terms of amplitude and phase. However, aberrations of the laser beam are still detected during the operations. The performance of laser projection systems can be improved compensating the effects of aberrations in the laser source or misalignment in the transfer optics before the laser beam propagating through the aperture. Despite the algorithm previously reported predict effective amplitude and phase correction is strongly dependent of an accurate DM characterization and transfer optics alignments. The use of feedback makes the system response better in presence of modeling error and external disturbances. A 2-DM closed loop approach for amplitude and a phase correction is designed. Finally the results of simulations and comparisons are discussed.
Frequency-based analysis and comparisons of tip-tilt on-sky data registered with 6.5 Magellan Telescope Adaptive Optics (MagAO) system on April and Oct 2014 was performed. Twelve tests are conducted under different operation conditions in order to observe the influence of system instrumentation (such as fans, pumps and louvers). Vibration peaks can be detected, power spectral densities (PSDs) are presented to reveal their presence. Instrumentation-induced resonances, close-loop gain and future challenges in vibrations mitigation techniques are discussed.
Multiple sodium laser beacons are a crucial development in multi-conjugate adaptive optics systems that offers wide-field diffraction limited adaptive optics correction to the astronomical community. This correction is strongly dependent on the laser beam power and quality, so a beam shaping concept is currently being developed to speed-up calibration and alignment of the laser before every run. A method previously reported, has now been implemented on a laboratory bench using MEMS deformable mirrors. Necessary calibration and characterization of the deformable mirrors are described and the results for experimental amplitude correction are presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.