Thermophotovoltaic (TPV) systems are promising for harnessing solar energy, waste heat, and heat from radioisotope decay or fuel combustion. TPV systems work by heating an emitter that emits light that is converted to electricity. One of the key challenges is designing an emitter that not only preferentially emits light in certain wavelength ranges but also simultaneously satisfies other engineering constraints. To elucidate these engineering constraints, we first provide an overview of the state of the art, by classifying emitters into three categories based on whether they have been used in prototype system demonstrations, fabricated and measured, or simulated. We then present a systematic approach for assessing emitters. This consists of five metrics: optical performance, ability to scale to large areas, stability at high temperatures, ability to integrate into the system, and cost. Using these metrics, we evaluate and discuss the reported results of emitters used in system demonstrations. Although there are many emitters with good optical performance, more studies on their practical attributes are required, especially for those that are not yet used in prototype systems. This framework can serve as a guide for the development of emitters for long-lasting, high-performance TPV systems.
We report on the development and use of a high heralding-efficiency, single-mode-fiber coupled telecom-band source of entangled photons for quantum technology applications. The source development efforts consisted of theoretical and experimental efforts and we demonstrated a correlated-mode coupling efficiency of 97% ± 2%, the highest efficiency yet achieved for this type of system. We then incorporated these beneficial source development techniques in a Sagnac configured telecom-band entangled photon source that generates photon pairs entangled in both time/energy and polarization degrees of freedom. We made use of these highly desirable entangled states to investigate several promising quantum technologies.
A tantalum tungsten solid solution alloy, Ta 3% W, based 2D photonic crystal (PhC) was designed and fabricated for high-temperature energy conversion applications. Ta 3% W presents advantages compared to the non-alloys as it combines the better high-temperature thermomechanical properties of W with the more compliant material properties of Ta, allowing for a direct system integration path of the PhC as selective emitter/absorber into a spectrum of energy conversion systems. Indeed metallic PhCs are promising as high performance selective thermal emitters for thermophotovoltaics (TPV), solar thermal, and solar TPV applications due to the ability to tune their spectral properties and achieve highly selective emission. A 2D PhC was designed to have high spectral selectivity matched to the bandgap of a TPV cell using numerical simulations and fabricated using standard semiconductor processes. The emittance of the Ta 3% WPhC was obtained from near-normal reectance measurements at room temperature before and after annealing at 1200 °C for 24h in vacuum with a protective coating of 40 nm HfO2, showing high selectivity in agreement with simulations. SEM images of the cross section of the PhC prepared by FIB confirm the structural stability of the PhC after anneal, i.e. the coating effectively prevented structural degradation due to surface diffusion. The mechanical and thermal stability of the substrate was characterized as well as the optical properties of the fabricated PhC. To evaluate the performance of the selective emitters, the spectral selectivity and useful emitted power density are calculated as a function of operating temperature. At 1200 °C, the useful emitted irradiance is selectively increased by a factor of 3 using the selective emitter as compared to the non-structured surface. All in all, this paper demonstrates the suitability of 2D PhCs fabricated on polycrystalline Ta-W substrates with an HfO2 coating for TPV applications.
KEYWORDS: Tantalum, Coating, Solar energy, Photonic crystals, Temperature metrology, Etching, Tungsten, Annealing, Reactive ion etching, System integration
A tantalum tungsten (Ta-W) solid solution alloy, Ta 3% W, based 2D photonic crystal (PhC) was designed and fabricated for high-temperature energy conversion applications. Metallic PhCs are promising as high performance selective thermal emitters for solid-state thermal-to-electricity energy conversion concepts including thermophotovoltaic (TPV) energy conversion, as well as highly selective solar absorbers/emitters for solar thermal and solar TPV applications due to the ability to tune their spectral properties and achieve highly selective emission. The mechanical and thermal stability of the substrate was characterized as well as the optical properties of the fabricated PhC. The Ta 3% W alloy presents advantages compared to the non-alloys as it combines the better high-temperature thermo-mechanical properties of W with the more compliant material properties of Ta, allowing for a direct system integration path of the PhC as selective emitter/absorber into a spectrum of energy conversion systems. Furthermore, the thermo-mechanical properties can be fine-tuned by the W content. A 2D PhC was designed to have high spectral selectivity matched to the bandgap of a TPV cell using numerical simulations and fabricated using standard semiconductor processes. The emittance of the Ta 3% W PhC was obtained from near-normal reflectance measurements at room temperature before and after annealing at 1200°C for 24h in vacuum with a protective coating of 40nm HfO2, showing high selectivity in agreement with simulations. SEM images of the cross section of the PhC prepared by FIB confirm the structural stability of the PhC after anneal, i.e. the coating effectively prevented structural degradation due to surface diffusion.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.