Presentation
11 November 2022 High-transparency pellicles for high-power EUV lithography
Márcio D. Lima, Takahiro Ueda, Takeshi Kondo, Tetsuo Harada
Author Affiliations +
Abstract
Pellicles capable of withstanding the high beam intensity of next generation EUV scanners at the same time maintaining a EUV transmission above 90% and lifetime sufficient to produce 10 000 wafers or more represents a significant challenge from the materials point of view. In this presentation, pellicles manufactured using free-standing carbon nanotubes (CNT) films less than 20 nm thick were characterized for EUV transmission, scattering, reflectivity, mechanical properties, and capability to stand high intensity (30 W/cm2) EUV radiation in environmental conditions similar to a 600W EUV scanner. Several types of coated CNT films were also tested to increase the lifetime of the pellicles. The EUV transmissions ranged from 98% for uncoated samples to 95% for coated. Scattering up to 4.7 degrees was less than 0.1% for uncoated films and 0.2% for coated one.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Márcio D. Lima, Takahiro Ueda, Takeshi Kondo, and Tetsuo Harada "High-transparency pellicles for high-power EUV lithography", Proc. SPIE PC12292, International Conference on Extreme Ultraviolet Lithography 2022, PC122920F (11 November 2022); https://doi.org/10.1117/12.2641778
Advertisement
Advertisement
KEYWORDS
Extreme ultraviolet lithography

Pellicles

Transparency

Scanners

Scattering

Carbon nanotubes

Extreme ultraviolet

RELATED CONTENT

Characterization of CNT based pellicles for EUV lithography
Proceedings of SPIE (January 01 1900)
ASML NXE pellicle update
Proceedings of SPIE (June 27 2019)
Novel EUV mask black border and its impact on wafer...
Proceedings of SPIE (March 18 2016)
EUV lithography imaging using novel pellicle membranes
Proceedings of SPIE (March 18 2016)

Back to Top