|
I.INTRODUCTIONRecent high spatial resolution observations of the local and distant Universe have opened new avenues in astrophysics. It is important to optimize telescope instrumentation for space-based UV and X-ray observations because the Earth’s atmosphere limits the bands observable with ground-based telescopes. This trend is already in place with proposed launch of the James Webb Space Telescope (JWST)[1] that will perform observations of the Universe in the mid-infrared band. Space based telescopes are also desirable because they experience little of the thermal and gravitational structural flexure of ground-based telescopes. The relative stability of the space telescope point spread function, and it’s ability to track an object over many hours makes space based UV astronomy a necessity. The current and projected technological capabilities of high precision mirror polishing cannot provide mirrors with sufficiently accurate figures without overly burdensome leadtime and cost. We propose a feasible method that can result in high spatial and wavelength resolution imaging of UV processes in the Universe. In recent years researchers suggested that a photon sieve (PS), a novel version of the Fresnel zone plate (FZP), may provide a viable opportunity to reach diffraction limit in X-ray imaging [2]. A photon sieve (PS) is essentially a FZP with an array of circular holes replacing the open zones, as shown in Fig. 2. [3] developed the theory for calculating the distribution of light in the focal plane for an arbitrary PS. Photon sieves have been fabricated and tested in visible light [4], [5] and suggested for UV and X-ray imaging [6], [7]. Due to their extremely high resolution, they have also been considered for imaging exoplanets [8], [9], [10]. The major reasons behind recently enhanced attention to photon sieves are their relatively low fabrication costs, the capability to manufacture large aperture lightweight diffraction optics, and the relative insensitivity of the PS to manufacturing errors, which enables them form diffraction limited images in the presence of state of the art manufacturing errors. In this paper we present a new design for a 5-meter PS that will perform UV spectral imaging of active galaxies (hereafter called active galactic nuclei or AGN) in the nearby and distant Universe. We also present scalar wave diffraction simulation results for a small scaled PS, and we present some art-work for a segmented PS aperture that is feasible for large format photon sieve space telescopes (PSST). II.SCIENCE ENABLED BY THE UV PHOTON SIEVE SPACE TELESCOPEDetermining the mass of the central black hole in galaxies is a question of fundamental importance in the modern astrophysics, allowing measurement of the efficiency of radiation (the so-called Eddington ratio), the relationship of the black hole to its host galaxy and the connection between the two, which has influenced the growth of structure in the universe via feedback. It has long been realized [11] that a significant fraction of radiating super-massive black holes (SMBH) in the centers of AGNs are surrounded by gas which is ionized by the AGN and whose dynamics are controlled by Keplerian motion. Spatially and spectrally resolved measurements of this gas [12]; [13] can determine of the mass of the black hole. However the limited spatial resolution and sensitivity of Hubble space telescope (HST) (about 60 mas) has limited the derivation of such masses with this technique to only 17 objects [14]. The technical requirement to measure black hole mass is set by effect of the potential well on the dynamics of the gas surrounding it. We could vastly increase the number of known SMBH masses by dynamically measuring the velocity widths of UV emission lines from the broad line region (BLR). Driven by requirements to resolve BLRs for many AGNs to a linear scale of less than 1 pc, we must image structures at a resolution of at least 5 mas in a 1 °A band in UV lines such as O VI λ1032/1038 °A, N V λ 1238/1242 °A, Ly λ1216 °A, C IV λ 1548/1550 °A. This is to study evolution of masses in early universe we will sample AGNs at z=0 (the current epoch) to at least z=1.3 (8 billion years ago). To sample the kinematics of AGNs and thus determine masses of SMBH within a 50 Mpc radius, we require the angular resolution of 5 mas. This is 10 times greater than HST’s resolving power. We have recently developed the Photon Sieve Space Telescope (PSST) concept presented in section III, which will be able to resolve linear structures in nearby galaxies to less than 10 pc and at z=1 to less than 100 pc. The properties of the PSST enables narrow band (about 1 °A) spectral imaging of astronomical objects in different parts of a selected UV spectral line. The subsequent scanning of an image across the spectral line profile will directly probe the motions of plasma that can be observed in regions of astronomical interest (as illustrated in Figure 1), including the regions associated with disk accretion, radial infall and/or outflows. III.THE PHOTON SIEVE TELESCOPEThe photon sieve telescope (PST) contains a screen with a concentric pattern of holes drilled into it. The diameter of the holes varies with radial position in the screen. The holes are nominally located in Fresnel zones[15], [16] that are located in annular radial zones nominally perpendicular to the Poynting vector[15]1 A.Fresnel diffraction theoryAccording to Fig. 2, the wavefield emanating from a point source that arrives at the radial zonal location rn of PST aperture has its Fresnel zones that are separated by 2mπ radians come to a focus at the distance q behind the screen according to Eq. (1). The value m is the Fresnel zone number, is the number of Fresnel zones in the beam, and varies with propagation distance (z ≃ q) from the aperture, wavenumber , and zone location . The value of m is undefined at focus, yet it encapsulates the diffraction properties of the wave fields near focus and is written as, Where w is the diameter of the outer diffraction aperture shown in Fig. 2. The diameter of the zone (wn) in the screen that results in constructive interference of the wavefields at focus (q) varies as, The coherent wave field at the focal point q from the photon-sieve (PS) is constructed by a coherent superposition of diffracted fields Un(X, Y) from the aperture (x, y) shown in Fig. (2) that were incident upon the focal plane (X, Y). The focal plane field Un(X, Y) is related to the aperture Un(x, y) by the Fresnel diffraction integral[16], [3], The phase relation in Eq. (4) is easily transformed into spherical polar coordinates, with the resultant integral in Eq. (4) now expressed as a zeroth-order Hankel transform[17], The properties of the focal plane irradiance distribution is evaluated by introducing a parabolic phase front into the pupil field, The variation of the normalized on-axis irradiance as a function of axial position along the direction of focus is shown in Fig. (3). The variation of the normalized on-axis irradiance as a function of axial position along the direction of focus is shown in Fig. (3). The properties of the focal plane irradiance distribution have to be properly modeled to optimize the amount of focus diversity[18] introduced to the focusing field in order to adequately perform the phase reconstruction of the pupil to provide optical control of the PST. The inside and outside irradiances Ein (X, Y; −z) and Eout(X, Y; +z) are introduced into the cost function ϵ in Eq. (7) that is optimized with respect to the Zernike[15] phase terms contained in Un(x, y) Eq. (4). The complex field distribution from the near-field region to the far-field region within the first Fresnel zone focus is calculated from quasi-analytic code written in Python[19] with Scipy[20], Numpy[21], and Matplotlib[22] modules. B.Photon-Sieve Telescope: Optical DesignThe PSST is characterized by the selection of three parameters: the wavelength, (λ), the diameter of the outer zone2, D, and the width of the outer zone, Δ. The reference wavelength is centered on Ly − α emission line. The diameter is chosen to provide the necessary spatial resolution to image the features of interest, and the width of the outer zone is generally set by fabrication considerations and detector pixel size considerations (see specifications in Table 1). The PSST is planned to be deployed in a formation flying configuration with two spacecraft around the L2 Sun-Earth Lagrangian point and controlled by micro-thrusters for flying and repointing. TABLE IOptical design of the PSST in the UV band around Ly − α.
One spacecraft will carry the photon sieve and another will be carrying the UV imaging detector, to be located at variable distances from the photon sieve. The focal length of the PSST is dependent on the wavelength of a spectral line and this will be achieved by mutual motions of the two spacecraft. Adjusting the focal length to be less than 42 km will allow observations of in galaxies with redshift of z=1 and greater. With a throughput of about 10%, the light collecting area of the 5-meter PSST is about 43% of HST’s, but the resolution at Ly − α is 5 mas, which is 10 times better than HST. Pointing information will be updated frequently to provide sufficient bandwidth to negate instrument jitter. In addition to image motion compensation, this mount will provide focus adjustment and wavelength scanning capabilities by incorporating axial motion. We will use the chromatic focus of the photon sieve to our benefit by scanning the focus on the detector, and thereby scanning in wavelength. Our prototype ground-based PS telescope will contain up to 18 hexagonal segments. The segments will be fit together to form the aperture, as shown in Fig (5). The segments will have three different prescriptions with the segments in a given hexagonal ring having the same prescription. The segments are used to demonstrate segment phasing and verify PSST sensitivities to optical control residual misalignments. IV.CONCLUSIONThe UV PSST described in this paper will provide a new way to probe the masses of SMBH in nearby and distant (up to z=1.3) active galaxies and thus shed light on the evolution of AGNs and their environments in the second half of the history of the Universe. These science goals can be achieved by the unique properties of the UV photon sieve imager with the aperture of 5 m that will provide 5 mas resolution in narrow spectral bands (~ 1 °A) within broad UV spectral emission lines such as Ly-α, CIV and NV forming in the vicinity of SMBHs. We calculated the PSF for a small aperture PS as an example. Larger PSST apertures can be manufactured to form hexagonal fitted mirrors, such as those illustrated in Fig. 5. In the case of segmented aperture telescopes, like that shown in Fig. 5, the segments will have to be phased to within the coherence length of the source. This can be accomplished by means of focal plane-based wavefront sensing and optical control techniques. In order to optimize the optical control and wavefront sensing parameters a full analysis of the focal plane irradiance distribution is required, which will also include the optical signals from other wavelength components that vary along the optical axis. ACKNOWLEDGMENTThe authors would like to thank Dr. Richard Mushotzky (University of Maryland at College Park) and Ms. Sevinc Figen Oktem (University of Illinois Urbana-Champaign Department of Electrical Engineering) for their valuable input and participation in this effort. REFERENCESGardner, J. P., Mather, J. C., Clampin, M., 123 485 Springer,2006). Google Scholar
Kip, D., Anastassiou, C., Eugenieva, E., Christodoulides, D., & Segev, M., Optics Letters, 26 524
(2001). Google Scholar
Cao, Q. & Jahns, J., J. Opt. Soc. Am. A, 19
(12),
(2002). Google Scholar
Anderson, G., Opt. Lett., 30
(22), 2976
(2005). Google Scholar
Anderson, G., Appl. Opt., 49
(33), 6391
(2010). Google Scholar
Davila, J.,
in Proc. of the SPIE,
814800
(2011). Google Scholar
Gorenstein, P., SPIE Newsroom,
(2006). 10.1117/2.1200601.0011 Google Scholar
Koechlin, L., Serre, D. & Duchon, P., A&A, 443 709
(2005). Google Scholar
Koechlin, L., Serre, D. & Deba, P., A&SpSci, 320 225
(2009). Google Scholar
Hinglais, E., Exp. Astron, 30 85
(2011). Google Scholar
Harms, R. J., Ford, H. C., Tsvetanov, Z. I., Ap. J, 435 L35
(1994). Google Scholar
Bower, G. A., Green, R. F., Danks, A., Ap. J, 492 L111
(1998). Google Scholar
Ferrarese, L., Ford, H. C., & Jaffe, W., Ap. J, 470 444
(1996). Google Scholar
Ferrarese, L., & Merritt, D., Ap. J, 539 L9
(2000). Google Scholar
M. Born and E. Wolf, Principles of optics, 6Pergamon Press,1993). Google Scholar
J. Goodman, Introduction to Fourier optics, 2McGraw-Hill,1988). Google Scholar
Ronald N. Bracewel, The Fourier transform and its applications, 247 2McGraw-Hill. p.1986). Google Scholar
Gonsalvez, R. A., Opt. Eng., 21
(5),
(1982). Google Scholar
Zemax is a commercially available optical design and modeling software code available from, www.zemax.com Google Scholar
|