Presentation
18 July 2018 Lessons learned from design, analysis, and rehabilitation of wheel and track systems (Conference Presentation)
Author Affiliations +
Abstract
Many radio telescopes, radar antennas, and enclosures for optical telescopes use wheel-on-track systems for their azimuth rotations. Design of such systems requires properly understanding of the contact behavior between the wheel and the azimuth track as the wheel rolls forward. Unless the azimuth track has a continuous running surface, one needs to understand how the track joints will affect the contact stress. In the case of multi-layer track systems where the track segments consist of wear plates mounted on base plates, finite element analyses are needed to capture friction and slip, and opening and closing of gaps at the interfaces between the wheel, wear plate, and the base plate. The paper presents lessons learned from the design, analysis, and rehabilitation of a few wheel-on-track systems. The paper discusses (1) how geometry of the wheel, geometry of the track, stiffness of the wheel bogie, and alignment will affect the contact stress, (2) how to evaluate possible impact load at track joints, (3) what design criteria should be used for strength and fatigue at the wheel/track contact, and (4) how wear between wear plate and base plate can be evaluated.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Frank W. Kan and Andrew Sarawit "Lessons learned from design, analysis, and rehabilitation of wheel and track systems (Conference Presentation)", Proc. SPIE 10700, Ground-based and Airborne Telescopes VII, 107000B (18 July 2018); https://doi.org/10.1117/12.2314609
Advertisement
Advertisement
KEYWORDS
Antennas

Finite element methods

Interfaces

Optical telescopes

Radar

Radio telescopes

RELATED CONTENT


Back to Top