Presentation + Paper
6 July 2018 LSST secondary mirror assembly
William J. Gressler, Douglas R. Neill, John Bagnasco, Paul J. Lotz, Dave Mills, Mike Warner, Oliver Wiecha, Gregory N. Bogan, James M. Ellis, Dale C. Zajac, Steven A. Szklany, Ronald T. Broccolo, Malcolm N. O'Sullivan, Frank A. Carbone, Cormic K. Merle
Author Affiliations +
Abstract
The Large Synoptic Survey Telescope (LSST) large field of view is achieved through a three-lens camera system and a three-mirror optical system comprised of a unique 8.4-meter diameter monolithic primary/tertiary mirror (M1M3) and a 3.4-meter diameter secondary mirror (M2)1. The M2 is a 100mm thick meniscus convex asphere. The M2 Assembly includes a welded steel cell and a support system comprised of 72 axial and 6 tangential electromechanical actuators to control the mirror figure. The M2 Assembly (including optical polishing and integrated optical testing) is being fabricated by Harris Corporation in Rochester, NY. The summary status of this system and results are presented.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William J. Gressler, Douglas R. Neill, John Bagnasco, Paul J. Lotz, Dave Mills, Mike Warner, Oliver Wiecha, Gregory N. Bogan, James M. Ellis, Dale C. Zajac, Steven A. Szklany, Ronald T. Broccolo, Malcolm N. O'Sullivan, Frank A. Carbone, and Cormic K. Merle "LSST secondary mirror assembly", Proc. SPIE 10700, Ground-based and Airborne Telescopes VII, 1070019 (6 July 2018); https://doi.org/10.1117/12.2311316
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Mirrors

Optical fabrication

Optical testing

Spindles

Large Synoptic Survey Telescope

Telescopes

RELATED CONTENT


Back to Top