Structural error simulation analysis of LAMOST fiber units

Xinyu Feng; Yonggang Gu; Yuran Shen; Hongzhuan Hu; Chao Zhai

doi:10.1117/12.2313119

10 July 2018 Structural error simulation analysis of LAMOST fiber units

Xinyu Feng, Yonggang Gu, Yuran Shen, Hongzhuan Hu, Chao Zhai

Proceedings Volume 10702, Ground-based and Airborne Instrumentation for Astronomy VII; 1070282 (2018) https://doi.org/10.1117/12.2313119
Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, United States

Abstract

LAMOST requires fast and accurate alignment of 4000 optical fiber units on a 1.75m-diameter convex focal plane to simultaneously observe 4000 targets, and the positioning accuracy of the unit is very demanding. But in fact there are a variety of factors such as motor motion error, machining error, assembly error, etc. which may lead to great positioning error. Moreover gear meshing transmission at the eccentric shaft and the anti-backlash spring may also cause greater positioning accuracy error. Besides,the inevitable gap between the center shaft and the bearing leads to motion error of the rotation mechanism, which also affects the precise positioning of the optical fiber. Therefore, in this paper, model and simulate the eccentric shaft basing on virtual prototype ADAMS set parameters and change the axial restraint of the gear, then obtain the axial movement curve. Design 9 groups of comparative tests through orthogonal experimental design.The results in case that: (1) The maximal movement of the gear at the eccentric shaft is within the allowable range, and has little effect on the unit positioning accuracy; (2) The overall error of the unit shaft clearance is in the range of -0.06deg/s -0.2deg/s, which leads to low positioning accuracy that may not meet the observation requirement. This research provides a theoretical basis for the design of a new generation high-precision positioning unit in the future.

Citation Download Citation

Xinyu Feng, Yonggang Gu, Yuran Shen, Hongzhuan Hu, and Chao Zhai "Structural error simulation analysis of LAMOST fiber units", Proc. SPIE 10702, Ground-based and Airborne Instrumentation for Astronomy VII, 1070282 (10 July 2018); https://doi.org/10.1117/12.2313119

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available