Paper
16 November 2018 Novel etching fluids for potassium dihydrogen phosphate
Salmaan Baxamusa, John Adams, Paul Ehrmann, Steven Hawks, Ted Laurence, Marlon Menor, Jemi Ong, Kathleen Schaffers
Author Affiliations +
Abstract
Absorbing defects such as fractures and contaminants are a leading cause of surface damage in nanosecond pulsed lasers. Etching such defects has proven to be a powerful technique for increasing the laser damage threshold of fused silica, but to date no etching process has been reported for potassium dihydrogen phosphate (KH2PO4 or KDP) or its deuterated analog (DKDP). We show that physical dissolution in water is a viable strategy for etching DKDP surfaces but surface-redeposited byproducts can serve as laser damage precursors. We use a water-in-oil microemulsion to etch engineered surface fractures in DKDP. Etching widens surface fractures laterally and decreases their optical activity, as measured by photoluminescence. The removal of 1 μm of the surface of a DKDP crystal increases the laser damage threshold (λ = 355 nm, 7 ns) of the engineered surface fractures by 2-4 J/cm2 (15-30%).
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Salmaan Baxamusa, John Adams, Paul Ehrmann, Steven Hawks, Ted Laurence, Marlon Menor, Jemi Ong, and Kathleen Schaffers "Novel etching fluids for potassium dihydrogen phosphate", Proc. SPIE 10805, Laser-Induced Damage in Optical Materials 2018: 50th Anniversary Conference, 108051G (16 November 2018); https://doi.org/10.1117/12.2500297
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Laser induced damage

Laser damage threshold

Potassium

Luminescence

Crystals

Optical activity

RELATED CONTENT

Laser conditioning process combining N 1 and S 1 programs...
Proceedings of SPIE (December 31 2009)
355 nm and 1064 nm pulse mixing to identify the...
Proceedings of SPIE (February 21 2011)
Optical resistance of GaN and InGaN thin films
Proceedings of SPIE (December 04 2012)
Influence of the laser beam size on laser induced damage...
Proceedings of SPIE (January 18 2007)

Back to Top